Z-Wave Protocol Implementation Conformance Statement
WallMote Quad
General Information
- Product Identifier: ZW130-F
- Brand Name: Aeotec
- Product Version: HW: 130 FW: 2.03
- Z-Wave Certification #: ZC10-19036398
Product Features
- Firmware Updatable: Updatable by Consumer by RF
- Supported Notification Types: Power Management
- Z-Wave Scene Type: Central Scene
Z-Wave Product Information
- Supports Z-Wave Beaming Technology?: No
- Supports Z-Wave Network Security?: Yes
- Supports Z-Wave AES-128 Security S0?: Yes
- Supports Security S2?: No
- SmartStart Compatible?: No
Z-Wave Technical Information
- Z-Wave Frequency: India
- Z-Wave Product ID: 0x0082
- Z-Wave Product Type: 0x0902
- Z-Wave Hardware Platform: ZM5101
- Z-Wave Development Kit Version: 6.61.01
- Z-Wave Library Type: Enhanced 232 Slave
- Z-Wave Device Type / Role Type: Wall Controller / Portable Slave
Association Group Information
Group 1 / Max Nodes: Not specified
Group 2: When touching Button 1, Basic Set command sent to associated nodes.
Group 3: When touching Button 1, Multilevel Switch Set command sent to associated nodes.
Group 4: When touching Button 2, Basic Set command sent to associated nodes.
Group 5: When touching Button 2, Multilevel Switch Set command sent to associated nodes.
Group 6: When touching Button 3, Basic Set command sent to associated nodes.
Group 7: When touching Button 3, Multilevel Switch Set command sent to associated nodes.
Group 8: When touching Button 4, Basic Set command sent to associated nodes.
Group 9: When touching Button 4, Multilevel Switch Set command sent to associated nodes.
Supported Command Classes (16)
- Association Group Info
- Battery
- Configuration
- Firmware Update Meta-Data V2
- Multi-Channel Association V3
- Notification V4
- Security S0
- Wake Up V2
- Association V2
- Central Scene V3
- Device Reset Locally
- Manufacturer Specific V2
- Multi-Channel V4
- Powerlevel
- Version V2
- Z-Wave Plus Info V2
Controlled Command Classes (3)
- Basic
- Switch Multilevel V4
- Switch Binary V2