Z-Wave Protocol Implementation Conformance Statement
WallMote
General Information
Product Identifier: ZW129-A
Brand Name: Aeotec
Product Version: HW: 129 FW: 1.05
Z-Wave Certification #: ZC10-17025439
Product Features
Firmware Updatable: Updatable by Consumer by RF
Z-Wave Scene Type: Central Scene
Z-Wave Product Information
- Supports Z-Wave Beaming Technology?: No
- Supports Z-Wave Network Security?: Yes
- Supports Z-Wave AES-128 Security S0?: Yes
- Supports Security S2?: No
- SmartStart Compatible?: No
Z-Wave Technical Information
- Z-Wave Frequency: U.S. / Canada / Mexico
- Z-Wave Product ID: 0x0081
- Z-Wave Product Type: 0x0102
- Z-Wave Hardware Platform: ZM5101
- Z-Wave Development Kit Version: 6.61.00
- Z-Wave Library Type: Enhanced 232 Slave
- Z-Wave Device Type / Role Type: Wall Controller / Portable Slave
Association Group Information
Group # / Max Nodes
1 / 1: Z-Wave Plus Lifeline. When touching the Button 1 to 2, the Central Scene Notification command will be sent to the associated node (1) in Association group 1.
3 / 5: When touching the Button 1, the Multilevel Switch Set command will be sent to the associated nodes in Association group 3.
4 / 5: When touching the Button 2, the Basic Set command will be sent to the associated nodes in Association group 4.
5 / 5: When touching the Button 2, the Multilevel Switch Set command will be sent to the associated nodes in Association group 5.
Supported Command Classes (16):
- Association Group Info
- Battery
- Configuration
- Firmware Update Meta-Data V2
- Multi-Channel Association V3
- Notification V4
- Security S0
- Wake Up V2
- Association V2
- Central Scene V2
- Device Reset Locally
- Manufacturer Specific V2
- Multi-Channel V4
- Powerlevel
- Version V2
- Z-Wave Plus Info V2
Controlled Command Classes (3):
- Basic
- Switch Multilevel V4
- Switch Binary V2
