Z-Wave Protocol Implementation Conformance Statement
Nano Shutter
This document provides the Z-Wave Protocol Implementation Conformance Statement for the Aeotec Nano Shutter.
General Information
- Product Identifier: ZW141-A
- Brand Name: Aeotec
- Product Version: HW: 141 FW: 2.02:01.02
- Z-Wave Certification #: ZC10-18096231
Product Features
- Firmware Updatable: Updatable by Consumer by RF
- Window Covering Control Features: Endpoint Aware
- Z-Wave Scene Type: Scene
Z-Wave Product Information
- Supports Z-Wave Beaming Technology?: Yes
- Supports Z-Wave Network Security?: Yes
- Supports Z-Wave AES-128 Security S0?: Yes
- Supports Security S2?: Yes: S2 Authenticated, S2 Unauthenticated
- SmartStart Compatible?: No
Z-Wave Technical Information
- Z-Wave Frequency: U.S. / Canada / Mexico
- Z-Wave Product ID: 0x008D
- Z-Wave Product Type: 0x0103
- Z-Wave Hardware Platform: ZM5101
- Z-Wave Development Kit Version: 6.71.03
- Z-Wave Library Type: Enhanced 232 Slave
- Z-Wave Device Type / Role Type: Window Covering - No Position/Endpoint / Always On Slave
Association Group Information
| Group # / Max Nodes | Description |
|---|---|
| Group 1 | Lifeline |
| Group 2 | Forward the Basic Set, Binary Switch Set, Scene Activation Set to associated nodes in Group 2 when the Nano Shutter receives the Basic Set, Binary Switch Set, Scene Activation Set commands from main controller. (E.g. Send/forward Basic Set to control the other nodes in association Group 2) |
Supported Command Classes (18):
- Association Group Info
- Basic
- Device Reset Locally
- Manufacturer Specific V2
- Scene Activation
- Security S0
- Supervision
- Switch Multilevel V3
- Version V2
- Association V2
- Configuration
- Firmware Update Meta-Data V4
- Powerlevel
- Scene Actuator Conf
- Security S2
- Switch Binary
- Transport Service V2
- Z-Wave Plus Info V2
Controlled Command Classes (2):
- Basic
- Switch Binary
