Aeotec MultiSensor 6

General Information

• Product Identifier: ZW100-A
• Brand Name: Aeotec
• Product Version: HW: 64 FW: 1.08
• Z-Wave Certification #: ZC10-15070011

Product Features

• Firmware Updatable: Updatable by Consumer by RF
• IP (Ingress Protection) Rated: Yes
• Battery Type: CR123A
• Battery Quantity: 2
• Sensors:
  • Air Temperature
  • Humidity
  • Luminance
  • Motion/No Motion (Binary)
  • Ultraviolet Index
  • Vibration/Shock (Binary)

Z-Wave Product Information

• Supports Z-Wave Beaming Technology?: Yes
• Supports Z-Wave Network Security?: Yes
• Supports Z-Wave AES-128 Security S0?: No
• Supports Security S2?: No
• SmartStart Compatible?: No

Z-Wave Technical Information

• Z-Wave Frequency: U.S. / Canada / Mexico
• Z-Wave Product ID: 0x0064
• Z-Wave Product Type: 0x0102
• Z-Wave Hardware Platform: ZM5101
• Z-Wave Development Kit Version: 6.51.06
• Z-Wave Library Type: Enhanced 232 Slave
• Z-Wave Device Type / Role Type: Multilevel Sensor / Reporting Sleeping Slave

Association Group Information

Group 1: Lifeline

• Nodes: 1/5
• The MultiSensor supports 1 association group. Group 1 is assigned to the Lifeline association group and can add a maximum of 5 association nodes. When the PIR motion sensor is triggered, the MultiSensor will send Basic Set (0xFF) to the associated nodes. If no PIR motion is triggered after the PIR interval time (configurable), the MultiSensor will send Basic Set (0x00) to the associated nodes. The automatically reports of temperature, humidity, luminance and ultraviolet (configurable) can also be sent to the associated nodes.

Controlled Command Classes (1):

• Basic