The Kent Bed Assembly Instructions

Maiden Home

Included Components & Hardware

Headboard: 1

Footboard: 1

Side Rails: 2

Center Support Rail: 1

Center Support Legs: 3

Slats: Queen & King: 14; California King: 15

Washers: 8

Nuts: 8

Wrench: 1

Notes

Assembly requires 2 people. When installing this bed, ensure all hardware is firmly secured. Do not loosen or move hardware.

Assembly Steps

Step 1

Locate the zipped panels on the side rails and open them to access the assembly hardware that connects the headboard and side rails.

Diagram: Shows headboard and side rails with zipped panels indicated.

Step 2

Insert the pre-attached bolts on the headboard into the side rails. Once inserted, place a washer and nut onto each bolt, and use the wrench to tighten them.

Diagram: Close-up view of bolts, washers, and nuts being tightened on the connection points between the headboard and side rails.

Step 3

Once the headboard and side rails are connected, locate the zipped panels on the opposite ends of the side rails and open them to access the assembly hardware that connects the footboard and side rails.

Diagram: Shows the assembled headboard and side rails, with arrows pointing to the zipped panels on the footboard end of the side rails.

Step 4

Insert the pre-attached bolts on the footboard into the side rails. Once inserted, place a washer and nut onto each bolt, and use the wrench to tighten them.

Diagram: Close-up view of bolts, washers, and nuts being tightened on the connection points between the footboard and side rails.

Step 5

Screw the center support legs into the center support rail, with the metal T-nuts facing upward.

Diagram: Shows the center support rail with three legs being screwed into place.

Step 6

Place the center support rail inside the bed frame and adjust the glides on the center support legs as needed, ensuring the legs stand straight and are flush to the floor. Check to ensure the zipped panels are closed.

Diagram: Shows the assembled bed frame with the center support rail and legs installed, and the center support rail positioned correctly.

Step 7

Place the slats inside the bed frame. Note that the slat pocket is designed to be slightly wider than the slat for ease of assembly.

Diagram: Shows the bed frame with slats being placed across the support rail.

Configurations

The illustrations below display the various configurations of the Kent Bed.

Queen & King (14 Slats)

Diagram: Illustration of a Queen/King size Kent Bed with 14 slats.

California King (15 Slats)

Diagram: Illustration of a California King size Kent Bed with 15 slats.

Assembly Checklist

Review the checklist below to ensure your bed is properly assembled.

Ensure all slats are present.
Ensure all slats are lying flat.
Ensure all hardware is firmly secured. Do not loosen or move hardware.
Ensure center support legs are level.

Should you need to move this piece for any reason-including installing a rug beneath it-disassemble it first, then reassemble in the desired position.

	The Eldridge Bed Assembly Instructions \| Maiden Home Detailed assembly instructions for The Eldridge Bed by Maiden Home. Learn how to assemble your bed frame, including component lists, step-by-step guides, and a final checklist.
	The Kent Bed by Maiden Home: Dimensions and Specifications Detailed specifications and dimensions for The Kent Bed by Maiden Home, including Queen, King, and California King sizes. Learn about materials, construction, and customization options.
	Maiden Home Wythe Bed Assembly Instructions Comprehensive guide for assembling the Maiden Home Wythe Bed. Includes component list, step-by-step instructions, and a final assembly checklist for a smooth setup.
	The Smith Bed by Maiden Home: Dimensions and Specifications Detailed specifications and dimensions for The Smith Bed by Maiden Home, including Queen, King, and California King sizes. Learn about materials, construction, and upholstery options.
	The Wythe Bed Assembly Instructions \| Maiden Home Step-by-step assembly instructions for the Maiden Home Wythe Bed, detailing included components, hardware, assembly steps, and configurations.
	Maiden Home Thompson Canopy Bed Assembly Instructions Step-by-step guide for assembling the Maiden Home Thompson Canopy Bed, including components, hardware, and a final checklist. Learn how to properly install your canopy bed.
	Maiden Home Thompson Bed Assembly Instructions \| Furniture Setup Guide Detailed assembly instructions and component guide for the Maiden Home Thompson Bed. This document provides step-by-step instructions, a list of parts, and a checklist to ensure proper setup of your bed frame.
	Maiden Home Smith Bed Assembly Instructions Comprehensive assembly instructions for the Maiden Home Smith Bed, detailing included components, hardware, and step-by-step guidance for proper setup and assembly.