Overview
This document provides comprehensive assembly instructions for the Maiden Home Wythe Bed. It guides users through the process of putting together their new bed frame, ensuring a stable and correctly assembled product.
Components & Hardware
The Wythe Bed assembly involves the following key components:
- Headboard (1)
- Side Rails (2)
- Footboard (1)
- Center Support Rail (1)
- Center Support Legs (3)
- Slats (14-15, depending on bed size)
Assembly is recommended for two people. Queen and King sizes typically use 14 slats, while California King beds use 15 slats.
Assembly Steps
The instructions detail a step-by-step process for connecting the side rails to the headboard and footboard, attaching the center support rail with legs, and finally placing the slats.
Key steps include:
- Connecting side rails to the headboard.
- Connecting side rails to the footboard.
- Attaching center support legs to the center support rail.
- Positioning the center support rail and adjusting legs.
- Placing the slats within the bed frame.
Configurations
The Wythe Bed is available in different configurations, notably differing in the number of slats:
- Queen & King: Typically includes 14 slats.
- California King: Typically includes 15 slats.
Assembly Checklist
A checklist is provided to ensure proper assembly:
- Ensure all slats are present and lying flat.
- Confirm all hardware is firmly connected.
- Verify center support legs are level.
- Check that mitered corners are flush.
- Note: If moving the bed, disassemble it first and then reassemble.
