Wireless Series
Model: Slimline-RF V3
Product Overview
A white Heatmiser Slimline-RF V3 wireless thermostat is shown. The display indicates a room temperature of 20°C and the time 16:30. Below the display are control buttons for power, menu, up, down, and mode.
Features
| Feature | Description | Setting | Feature | Description | Setting |
|---|---|---|---|---|---|
| RF-Switch V1/V2 Compatible | Y | Built In Sensor | Y | ||
| UH8-RF V1/V2 Compatible | Y | Remote Air Sensing Mode | Y | ||
| Boost V1/V2 Compatible | Y | Floor Sensing Mode | N | ||
| Temperature Range | 05-35 °C | 41-95 °F | Remote Probe Included | N | ||
| Non-Programmable Mode | Y | Accuracy | ±1°C | ||
| 5/2 Day Programming Mode | Y | Adjustable Switching Differential | Y | ||
| 7 Day Programming Mode | Y | Wireless Fail Safe Function | Y | ||
| 24 Hour Programming Mode | Y | RF Frequency | 868MHz | ||
| Number of Heating Levels | 4 | Operational Radio Range (Open Space) | Up to 40M | ||
| Optimum Start | Y | Power | 2 x AAA | ||
| Number of HW Times | 4 | Battery Life Time | Typically 1 Year | ||
| Holiday Function | Y | Mounting Type | Wall | ||
| Keylock Function | Y | Supply | 2 x AAA | ||
| Temperature Hold | Y | Installed Dimensions (L,H,D) | 85 x 98 x 24mm | ||
| Temperature Override Frost | Y | Weight | 106g | ||
| Frost Protection | Y | ||||
| °C/°F Option | Y |
Feature Table Details
| Feature | Description | Setting | Feature | Description | Setting |
|---|---|---|---|---|---|
| 01 | Temperature Format | 00 = °C, 01 = °F (°C = Default) | 09 | Program Mode | 00 = 5/2 Day, 01 = 7 Day, 24 Hour |
| 02 | Switching Differential | 01°-03°C (Default 01°C) | 10 | Program Type | 00 = Non-Programmable, 01 = Programmable, 02 = Programmable with Hot Water |
| 03 | Frost Mode | 00 = Disabled, 01 = Enabled, (01=Default) | P1 | Pairing to RF-Switch 1&2 & UH8-RF V2 | Commences countdown from 99-00 seconds. |
| 04 | Output Delay | 00-15 Minutes (00=Default) | P2 | Pairing to UH8-RF | 00-99 = Receiver address/zone no. & type. |
| 05 | UP/Down Temperature Limit | 00°C - 10°C (00=Default) | P3 | Failsafe | 00 = Disabled, 01 = Enabled (Default) |
| 06 | Sensor Selection | 00 = Built In Sensor, 01 = Remote Air Sensor | Set Feature 06 to 01 to enable remote air sensor. | ||
| 07 | Optimum Start | 00-03 hours (00=Default) | |||
| 08 | Rate Of Change | Minutes to raise by 1°C |
Product Dimensions (mm) & Wiring Specification
A diagram shows the front of the thermostat. Dimensions are indicated: 86mm across the top, 43mm across the base, and a height of 74mm. The screen and control buttons are visible.
A diagram shows the side profile of the thermostat.
A diagram shows the rear of the thermostat, indicating connections for a 'Remote Air Probe' with three terminals labeled.
Company Information
Heatmiser UK Ltd
1 - 5 Hurstwood Court, Mercer Way,
Shadsworth Business Park, Blackburn,
Lancashire. BB1 2QU, England
Registered in England: 3747773
Contact:
tel: 01254 669090
fax: 01254 669091
email: sales@heatmiser.com
web: www.heatmiser.com
WEEE Registration Number: WEE/GF0052TQ
Symbols: CE, WEEE [battery symbol]
