Heatmiser Slimline-RF Wireless Thermostat
Model: Slimline-RF
General Features
| Feature | Specification | Feature | Specification |
|---|---|---|---|
| RF-Switch Compatible | Y | Built In Sensor | Y |
| UH8-RF Compatible | Y | Remote Air Sensing Mode | Y |
| Boost Compatible | Y | Floor Sensing Mode | N |
| Temperature Range | 05-35 °C | 41-95 °F | Remote Probe Included | N |
| Non-Programmable Mode | Y | Accuracy | +/-1°C |
| 5/2 Day Programming Mode | Y | Adjustable Switching Differential | Y |
| 7 Day Programming Mode | Y | Wireless Fail Safe Function | Y |
| Number of Heating Levels | 4 | RF Frequency | 868MHz |
| Optimum Start | Y | Operational Radio Range (Open Space) | Up to 100M |
| Number of HW Times | 4 | Power | 2 x AAA |
| Holiday Function | Y | Battery Life Time | Typically 1 Year |
| Keylock Function | Y | USB Power Lead Included | N |
| Temperature Hold | Y | Mounting Type | Wall |
| Temperature Override Frost | Y | Supply | 2 x AAA |
| Protection | Y | Installed Dimensions (L,H,D) | 85 x 98 x 24mm |
| °C / °F Option | Y | Weight | 106g |
Feature Table
| Feature | Description | Setting | Feature | Description | Setting |
|---|---|---|---|---|---|
| 01 | Temperature Format | 00 = °C , 01 = °F (°C = Default) | 09 | UH8-RF Output Type | Underfloor Heating = 00, 01 = Radiators |
| 02 | Switching Differential | 01°-03°C (Default 01°C) | 10 | Fail Safe | 00 = Disabled, 01 = Enabled |
| 03 | Frost Mode | 00 = Disabled, 01 = Enabled, (01=Default) | 11 | UP/Down Temperature Limit | 00°C - 10°C (00=Default) |
| 04 | Frost Protection Temperature | 07°-17°C (Default 12°C) | 12 | Sensor Selection | 00 = Built In Sensor, 01 = Remote Air Sensor |
| 05 | Output Delay | 00-15 Minutes (00=Default) | 13 | Floor Temperature Limit | Not used on this model |
| 06 | Receiver Type | 00 = UH8-RF, 01 = RF-Switch | 14 | Optimum Start | 00-03 hours (00=Default) |
| 07 | Receiver Address | UH8-RF = 01-99, RF-Switch = 01-32 | 15 | Rate Of Change | Minutes to raise by 1°C |
| 08 | UH8-RF Zone Number | 01-08 | 16 | Program Mode | 00 = 5/2 Day, 01 = 7 Day |
| 17 | Device Type | 00 = Non-Programmable 01 = Programmable 02 = Programmable with Hot Water |
Product Dimensions & Wiring Specification
The product dimensions are illustrated with a front view showing a width of 86mm and a depth of 63mm. A side view indicates a thickness of 24mm. The back view details wiring terminals. It includes connections for a "REMOTE AIR PROBE" with terminals for "Red Wire" and "White Wire". Additionally, there are terminals labeled 10, 11, and 12. A note specifies: "Set feature 12 to 01 to enable the remote air probe".
