KÅSEBERGA

Important Safety Information

WARNING!

Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Parts Included

24x Screw (100416)
6x Screw (109532)
5x Screw (113138)
2x Wall bracket (10068954)

Assembly Steps

Step 1: Prepare the Wall

Diagram description: Shows a person marking a wall with a pencil and a spirit level. A wall bracket is shown being held against the wall. Arrows indicate marking points for screw holes.

Mark the desired position for the wall bracket on the wall using a spirit level to ensure it is horizontal. Mark the screw hole locations.

Step 2: Mount the Wall Bracket

Diagram description: Shows the wall bracket being attached to the wall with screws and plugs. The diagram indicates that screws and plugs for the wall are not included with the product.

Secure the wall bracket to the wall using appropriate screws and wall plugs (not included). Ensure the wall is suitable and can support the weight and forces generated by the product.

Step 3: Attach Main Panel to Bracket (Top)

Diagram description: Shows the main pegboard panel being aligned with the wall bracket and attached using 3 screws (part number 113138).

Attach the main pegboard panel to the wall bracket using 3 screws (113138).

Step 4: Attach Support Blocks

Diagram description: Shows 2 support blocks being attached to the main pegboard panel using 2 screws (part number 113138).

Attach the 2 support blocks to the main pegboard panel using 2 screws (113138).

Step 5: Attach Shelves

Diagram description: Shows 3 shelves being attached to the support blocks. Each shelf is attached using 2 screws (part number 109532).

Attach the 3 shelves to the support blocks. Use 2 screws (109532) for each shelf.

Step 6: Attach Main Panel to Bracket (Bottom)

Diagram description: Shows the main pegboard panel being further secured to the wall bracket using 4 screws (part number 100416).

Secure the main pegboard panel to the wall bracket using 4 screws (100416).

Step 7: Attach Top Angled Pieces

Diagram description: Shows 2 angled pieces being attached to the top of the main pegboard panel using 2 screws (part number 100416) for each piece.

Attach the 2 top angled pieces to the main pegboard panel. Use 2 screws (100416) for each piece.

Step 8: Attach Bottom Triangular Pieces

Diagram description: Shows 4 triangular pieces being attached to the bottom of the main pegboard panel using 2 screws (part number 100416) for each piece.

Attach the 4 bottom triangular pieces to the main pegboard panel. Use 2 screws (100416) for each piece.

Step 9: Attach Horizontal Rail

Diagram description: Shows a horizontal rail being slid into place at the top of the main panel.

Slide the horizontal rail into the designated slots at the top of the main pegboard panel.

Step 10: Attach Rail Caps

Diagram description: Shows 2 caps (part number 10068954) being pushed onto the ends of the horizontal rail.

Attach the 2 caps (10068954) to the ends of the horizontal rail.

Step 11: Attach Decorative Pieces

Diagram description: Shows 2 decorative triangular pieces being attached to the bottom of the main pegboard panel using 2 screws.

Attach the 2 decorative triangular pieces to the bottom of the main pegboard panel using 2 screws.

	IKEA KÅSEBERGA Wall Organizer Assembly Instructions Comprehensive assembly guide for the IKEA KÅSEBERGA wall-mounted pegboard organization system. Learn how to safely install and configure your KÅSEBERGA unit with step-by-step instructions and important safety warnings.
	UPPSPEL Pegboard Assembly Instructions Step-by-step guide for assembling the IKEA UPPSPEL pegboard, detailing parts and mounting procedures. Wall mounting screws are not supplied.
	SKOGSMOSAIK Wall Shelf Assembly Instructions \| IKEA Detailed assembly instructions for the IKEA SKOGSMOSAIK wall shelf. Learn how to mount and install this versatile storage solution, including tool requirements, parts, steps, and weight limits.
	SKOGSMOSAIK Wall Shelf Assembly and Usage Guide Detailed assembly instructions and usage guidelines for the IKEA SKOGSMOSAIK wall shelf, including weight limits and wall mounting advice.
	PLATSA Storage Cabinet Assembly Instructions \| IKEA Official assembly instructions for the IKEA PLATSA storage cabinet. Learn how to safely build and mount your PLATSA unit with step-by-step guidance and essential safety warnings.
	KUNGSFORS Wall Shelf Assembly Instructions Step-by-step guide for assembling and securely mounting the IKEA KUNGSFORS wall shelf. Includes essential safety warnings and installation procedures.
	IKEA PLATSA Shelving Unit Assembly Instructions Comprehensive assembly guide for the IKEA PLATSA open shelving unit, detailing all steps, safety precautions, and part identification for a secure and proper setup. Includes instructions for basic assembly, shelf installation, wall mounting, and unit stacking.
	IKEA STÄLL Shoe Cabinet Assembly Instructions Comprehensive assembly guide for the IKEA STÄLL shoe cabinet, detailing all steps from frame construction to drawer installation and essential safety warnings, including wall mounting instructions.