SKOGSMOSAIK
Important Information
As wall materials vary, screws for fixing to wall are not included. For advice on suitable screw systems, contact your local specialised dealer.
Tools and Parts
Tools required: Screwdriver, pencil, spirit level, measuring tape.
Included parts: 1x Mounting bracket, 2x Screws (part number 10123090).
Installation Steps
Prepare the Wall
Measure and mark a horizontal line on the wall, 29 cm (11 1/2 inches) from the top edge of the unit's intended position. Use a spirit level to ensure the line is straight. Insert wall fasteners (screws/plugs, not included) into the wall at the marked positions.
Attach Mounting Bracket to Wall
Align the mounting bracket with the fasteners in the wall. Secure the bracket to the wall using appropriate screws (not included). Ensure the bracket is level. Note: Use only the correct type of screws for your wall material. [incorrect] use of wrong fasteners.
Attach Bracket to Unit
Position the main unit. Attach the mounting bracket to the top of the unit using two screws (part number 10123090). Ensure the bracket is securely fastened to the unit.
Install Shelves
Slide the two small shelves into the desired positions on the pegboard section of the unit. Arrows indicate the direction of insertion.
Weight Limits and Warnings
[warning] symbol indicating important safety information.
Weight limits: Maximum 1 kg (2 lb) for each small shelf, and a maximum of 2 kg (4.5 lb) for the larger shelf area.
