STÄLL Shoe Cabinet
By IKEA
Safety First: Preventing Tip-Overs
Serious or fatal crushing injuries can occur from furniture tip-over.
ALWAYS secure this furniture to the wall using tip-over restraints.
To further reduce the risk of serious injury and death from tip-overs:
- Place heaviest items in the lower drawer.
- Do not set TVs or other heavy objects on top of this product.
- Never let children climb or hang on drawers, doors, or shelves.
Tools Required
The following tools are recommended for assembly:
- Phillips head screwdriver
- Hammer
- Pencil
- Drill
Drill Bit Sizes:
- [drill bit Ø 8mm (5/16")]
- [drill bit Ø 3mm (1/8")]
Hardware Included
Identify all parts before starting assembly:
| Part Number | Description | Quantity |
|---|---|---|
| 109048 | Long Screw | 2x |
| 109577 | Medium Screw | 1x |
| 121714 | Cam Lock Housing | 2x |
| 100214 | Cam Bolt | 4x |
| 118331 | Dowel | 16x |
| 101350 | Wooden Dowel | 19x |
| 118137 | Cam Lock | 16x |
| 100823 | Small Screw | 16x |
| 101541 | Small Screw | 4x |
| 100347 | Tiny Screw | 24x |
| 10097027 | Drawer Slide Bracket | 8x |
| 102715 | Mounting Bracket | 2x |
| (Generic Washer) | Washer | 2x |
| 153552 | Drawer Slide Component | 8x |
| 100001 | Handle | 1x |
Assembly Instructions
- Steps 1-4: Frame Assembly: Assemble the main cabinet frame by connecting side panels, base, back support, middle dividers, and top support using dowels, cam bolts, and cam locks.
- Steps 5-8: Drawer Slide Attachment (Cabinet): Attach drawer slide brackets (10097027) and slide components (153552) to the inner sides of the cabinet frame using screws and dowels. Attach the top panel and bottom support.
- Steps 9-12: Drawer Assembly: Construct the drawer boxes by attaching front, base, side, and back panels using dowels, cam bolts, and cam locks.
- Steps 13-15: Drawer Runner Attachment (Drawers & Cabinet): Attach drawer runners to the sides of the assembled drawers using screws. Attach corresponding drawer runners to the cabinet sides using dowels and cam locks.
- Steps 16-19: Final Runner & Bracket Attachment: Attach mounting brackets (102715) to the top rear of the cabinet. Continue attaching drawer runners to the cabinet sides using various fasteners.
- Steps 20-21: Drawer Insertion & Handles: Slide the assembled drawers into the cabinet and secure their fronts. Attach the handles (100001) to the drawer fronts using screws (153552).
- Step 22: Final Check: Verify the smooth operation of the drawers.
- Step 23: Tip-Over Restraint: Attach the tip-over restraint hardware to the top rear of the cabinet using screws (109048) and cam locks (100823).
- Steps 24-27: Inserting Drawer Assemblies: Prepare and insert the drawer assemblies into the cabinet, ensuring they click into place. Avoid forcing incorrect insertions.
- Steps 28-29: Drawer Finalization: Attach any remaining drawer components and bottom panels, securing them with screws.
- Step 30: Completion: The assembly is complete. Open the cabinet doors to access the compartments.
Wall Mounting Instructions
Secure the furniture to the wall using the provided tip-over restraint hardware. Choose the appropriate method based on your wall type.
Wall Type A: Solid Wall
Drill a [drill bit Ø 8mm (5/16")] hole. Insert the wall plug. Secure the bracket with a screw (109048) into the plug. Ensure the hole depth is approximately 70 mm (2 3/4").
Wall Type B: Hollow Wall
Drill a [drill bit Ø 8mm (5/16")] hole. Insert the wall plug. Secure the bracket with a screw (109048) into the plug. Ensure the hole depth is approximately 30 mm (1 1/4").
Wall Type C: Solid Wood
Drill a [drill bit Ø 3mm (1/8")] hole. Secure the bracket directly with a screw (109048). Ensure the hole depth is approximately 30 mm (1 1/4").
