UPPSPEL Pegboard Assembly Instructions
General Information
This document provides assembly instructions for the IKEA UPPSPEL pegboard. Please note that screws for wall mounting are not included, as wall materials vary. For advice on suitable screw systems, it is recommended to contact your local specialized dealer.
Parts Included
- 4x Screw/Cap (Item 153312)
- 2x Mounting Brackets (Item 153307)
- 1x Mounting Rail (Item 153305)
Assembly Steps
Prepare and Mark the Wall
Gather the necessary tools: a screwdriver, spirit level, pencil, and tape measure. Mark two points on the wall, approximately 60 cm (23 5/8") apart, ensuring they are level.
Attach Mounting Rails to the Wall
Attach the mounting rail (Item 153305) to the wall using appropriate screws (not included). The diagram indicates that if multiple rails are used, they should be mounted with a vertical spacing of 56.5 cm (22 1/4") and a horizontal spacing of 16.5 cm (6 1/2") between their attachment points. Ensure the rail(s) are level and securely fastened.
Attach Pegboard to Rails
Align the pegboard with the mounted rails. Secure the pegboard to the rails using the provided screws/caps (Item 153312).
