STRANDAD Table Lamp
Brand: IKEA
Important Safety Instructions
For indoor use only.
This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat the safety purpose of the polarized attachment plug. Do not alter the plug.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING: Deviation from the assembly instructions may result in a risk of fire or electric shock.
(Safety instructions are also provided in French and Spanish in the original document.)
Assembly Instructions
The following steps guide you through the assembly of your STRANDAD table lamp.
Step 1: Attach Legs
Attach the three legs to the central lamp base. Ensure they click into place.
[Diagram: Shows a lamp base with three legs being attached. A magnified view shows a component clicking securely into place.]
Step 2: Attach Base Ring
Connect the circular base support to the three legs. This involves inserting pins into designated holes for secure attachment.
[Diagram: Depicts attaching a circular ring to the three legs. A magnified view shows a pin being inserted into a hole.]
Step 3: Attach Top Frame
Attach the upper support frame structure to the lamp base assembly. This involves connecting two parts.
[Diagram: Shows the upper support frame being lowered onto the lamp base assembly. Magnified views highlight the connection points.]
Step 4: Place Lampshade Frame
Position the lampshade's internal frame onto the upper support. Secure it by connecting two points.
[Diagram: Illustrates placing the lampshade's internal frame onto the upper support. Magnified views show how the frame is secured.]
Step 5: Secure Lampshade
Place the fabric lampshade over the internal frame and secure it. This involves pressing down to attach it at two points.
[Diagram: Shows the fabric lampshade being fitted over the internal frame. Magnified views demonstrate pressing down to secure the shade at two points.]
Step 6: Install Lamp Holder
Install the lamp socket and wiring assembly onto the top of the lampshade structure. This involves connecting the socket and wiring.
[Diagram: Depicts the installation of the lamp socket and wiring assembly onto the top of the lampshade structure. Magnified views show the connection points.]
Step 7: Insert Light Bulb
Screw in a light bulb (not included) into the installed lamp socket.
[Diagram: Shows a light bulb being screwed into the installed lamp socket.]
