VidaLite Spot Light 5CCT

Important:

Read all the instructions included before installing the fixture. Retain this document for future reference.

Safety Warning:

Turn off the power at the main fuse/breaker panel before beginning installation to avoid electrical shock. Do not install the fixture on an unfinished ceiling. Ensure a stable and secure surface before installing. Wear gloves while installing the fixture. Indoor installation only.

Diagrams

Fig. 1: Mounting Assembly
Diagram showing the mounting bracket assembly. Components include mounting screw, mounting bracket, canopy, 5CCT switch, and decorative nut.

Fig. 2: Fixture Base
Diagram illustrating the fixture's base or canopy, showing attachment points.

Fig. 3: 5CCT Switch
Diagram of the 5CCT Switch, a slider mechanism with color temperature settings labeled: 2700K, 3000K, 3500K, 4000K, 5000K.

Fig. 4: Wiring Connections
Diagram detailing the electrical wiring connections. It shows the Black Wire and White Wire, with labels 'L' (Line/Hot) and 'N' (Neutral) indicating connections.

Fig. 5: Installed Fixture
Diagram depicting the fully installed spot light fixture mounted flush to a ceiling.

Installation Steps:

1. Turn off the power.
2. Dismantle mounting bracket subassembly as shown in Fig. 1, then install the mounting bracket to the J-Box using mounting screws.
3. Move the slider on the 5CCT Switch to the position corresponding to the desired color temperature.
4. Connect the fixture to a suitable ground in accordance with local electrical codes.
5. Connect the White wire to the neutral power line wire using a wire nut.
6. Connect the Black wire to the hot power line wire using a wire nut.
7. Neatly place all wires and wire nut connections inside the J-box.
8. Install the canopy to the ceiling using the decorative nuts.
9. Turn on the power.