VidaLite 5 Head Track Light 5CCT

Important

Read all the instructions included before installing the fixture. Retain this document for future reference.

Safety Warning

Turn off the power at the main fuse/breaker panel before beginning installation to avoid electrical shock. Do not install the fixture on an unfinished ceiling. Ensure a stable and secure surface before installing. Wear gloves while installing the fixture. Indoor installation only.

Diagrams

Figure 1

Diagram illustrating the mounting assembly. It shows a mounting screw, mounting bracket, canopy, decorative nut, and the 5CCT switch. The track light fixture with multiple heads is also depicted.

Figure 2

Diagram showing the underside of the track light fixture, detailing the wiring connections and mounting points to the canopy.

Figure 3

Diagram of the 5CCT switch, indicating positions for different color temperatures such as 2700K and 3000K.

Figure 4

Diagram illustrating wire connections. It shows a black wire connecting to the hot power line wire with a wire nut, and a white wire connecting to the neutral power line wire with a wire nut.

Figure 5

Diagram showing the complete VidaLite 5 Head Track Light fixture mounted to a ceiling, with all five heads visible.

Installation Steps

1. Turn off the power.
2. Dismantle mounting bracket subassembly as fig.1, install mounting bracket to J-Box with mounting screws.
3. Move the gear of the 5CCT Switch to the position corresponding to the desired color temperature.
4. Connect the fixture to a suitable ground in accordance with local electrical codes.
5. Connect the White wire to the neutral power line wire with a wire nut.
6. Connect the Black wire to the hot power line wire with a wire nut.
7. Neatly place all wires and wire nut connections inside the J-box.
8. Install canopy to ceiling with decorative nuts.
9. Turn on the power.