Immergas VICTRIX PRO V2
Wall-hung light commercial condensing gas boiler
For 60 years, Immergas has been the energy of change.
Overview
The VICTRIX PRO V2 is a modular condensing boiler with a sealed chamber and forced draught, designed for heating-only applications. It is ideal for central heating in both residential and commercial buildings, offering high efficiency and advanced Hydrogen Ready technology.
Key Features:
- Available in 9 versions: 35, 55, 60, 68, 80, 100, 120, 150, and 180 kW.
- Hydrogen Ready certification: compatible with up to 20% hydrogen blends.
- NOx Class 6 emissions for low environmental impact.
- Wide modulation range (up to 1:10).
- Compact and linear design.
- Suitable for cascade installation (up to 5 boilers).
- Optional outdoor installation.
High Installation Flexibility
The VICTRIX PRO V2 boasts reduced dimensions, making it ideal for centralized heating systems in residential and commercial buildings. Its compact design and vertical scrolling lid facilitate panel protection. The possibility of 5-generator cascade installations allows for high output power (up to 900 kW) with reduced space requirements.
Installation Options:
- Floor-Standing Support: Dedicated kits allow installation on floors or walls, suitable for linear or back-to-back configurations in limited spaces.
- Outdoor Installation in Cabinet: A cabinet kit enables outdoor installation in a floor-standing configuration, with options for cascade setups.
- Optimal for Outdoor: Features IPX5D protection grade and cataphoresis treatment for outdoor installation, even without a cover kit. Anti-freeze protection down to -15°C is available with an optional kit.
High Performance and Efficiency
The wide modulation range (1:10) optimizes generator function even with low heating demands. The complete range meets NOx Class 6 standards for polluting emissions, making it suitable for buildings with high energy performance requirements and low environmental impact.
Energy Efficiency:
- Achieves A+ class energy efficiency when installed with an IMMERGAS advanced thermoregulation panel (e.g., Modulating Remote Panel code 3.020358).
- Seasonal efficiency up to 94% (for models up to 120 V2).
Hydrogen Ready Technology
VICTRIX PRO V2 boilers have obtained Hydrogen Ready certification, enabling them to operate with natural gas, LPG, and up to a 20% blend of hydrogen. This technology is crucial for reducing CO2 and greenhouse gas emissions, contributing to a zero-pollution future. The introduction of 20% hydrogen blends could lead to significant reductions in global CO2 emissions.
Technical Characteristics
The VICTRIX PRO V2 incorporates advanced features for optimal performance and reliability:
- Stainless Steel Condensing Module: Features stainless steel hydraulic circuits for durability.
- Total Pre-Mixing Combustion System: Allows for high output power modulation (10-100%) and compatibility with natural gas and LPG.
- Low-Consumption Modulating Pump: Adjusts speed to maintain constant temperature difference, reducing electrical absorption and noise.
- Integrated Condensate Discharge Syphon: Ensures proper discharge of condensates.
- Safety Valve: Standard inclusion (4 bar for 35-80 kW, 5.4 bar for 100-180 kW).
- New Control Electronics: Manages up to 2 water distribution zones (direct or mixed) with programmable temperature sets and climatic curves. Supports DHW circuit management with a 3-way diverting valve or dedicated pump. Includes anti-legionella function.
Cascade and System Management
Easy Management of Boiler Cascade: The Cascade and Zones Regulator Kit allows control over connected boilers, optimizing operation based on heat demand.
Thermal Solar System Management: The kit can manage thermal solar plants for DHW production with appropriate temperature probes.
New Remote Management: An optional kit enables remote monitoring of the system.
Main Characteristics Summary:
- Electrical Connection: 2 BUS wires, max length 50 meters.
- Temperature Settings: Central heating (COMFORT, ECO, Anti-Freeze), DHW temperature.
- Maximum Boilers in Cascade: 8.
- Water Distribution Zones: 3 (1 direct and 2 mixed) + 1 DHW pump.
- Connection in Series: Up to n°3 Cascade and Zones Regulator kits and n°6 expansion kits.
- Thermal Solar System Connection: Possible without an additional external control unit.
Technical Data Highlights
The VICTRIX PRO V2 range offers a wide spectrum of performance across its models:
Power Output Range:
- Minimum Heat Input: 3.9 kW to 34.7 kW (depending on model).
- Maximum Heat Output (80/60°C): 33.9 kW to 166.9 kW (depending on model).
- Maximum Heat Output (50/30°C): 36.9 kW to 180.2 kW (depending on model).
Efficiency:
- Central Heating Seasonal Efficiency (ηs): 93-94%.
- Efficiency at 100% Pn (50/30°C): 105.8% to 108.4%.
- Efficiency at Partial Load 30% (50/30°C): 109.2% to 109.9%.
Emissions:
- NOx Class: 6.
Dimensions:
- Weights range from approximately 50 kg to 163 kg (empty).
- Water content ranges from 2.4 litres to 15.0 litres.
For detailed specifications for each model (35, 55, 60, 68, 80, 100, 120, 150, 180 kW), please refer to the full technical documentation.
Dimensions and Connections
Detailed diagrams are provided for different model series:
- VICTRIX PRO 35/55/60/68/80 V2 EU: Shows overall dimensions, connection points for Electrical (V), Gas (G), Condensate Drain (SC), System Flow (M), System Return (R), Air Intake (A), Flue Expulsion (S), and Intake/Expulsion (A/S). Connection sizes are G 3/4" for gas and 1 ½" for system flow/return. Separator kit distances and concentric kit dimensions are also illustrated.
- VICTRIX PRO 100/120/150 V2 EU: Similar diagrams showing dimensions and connection points (V, G, SC, M, R, A, S, A/S). Gas connection is 1", system connections are 1 ½". Specific dimensions for different model variants (e.g., 557mm, 627mm height) are noted. Separator kit and concentric kit dimensions are provided.
- VICTRIX PRO 180 V2 EU: Diagrams illustrate dimensions and connection points (V, G, SC, M, R, A, S, A/S). Gas connection is 1", system connections are 1 ½". Separator kit distances (Ø 160/160) are shown.
Head-Flow Rate Curves
Performance curves are provided for various models (e.g., VICTRIX PRO 35, 55, 80, 100, 120, 150, 180 V2 EU). These graphs illustrate the available head (kPa) versus flow rate (l/h), indicating pump power absorption at different speeds (100% and 77%).
Accessories and Kits
A comprehensive range of accessories and kits are available to enhance functionality and installation:
- Thermoregulation: Remote controls, chronothermostats (wired and wireless), external probe kits, system delivery probe kits, and DHW probe kits.
- Cascade and Zones Regulator Kits: For managing multiple boilers, water distribution zones, and thermal solar systems. Includes Clip-in kits, expansion kits, zone manager kits, and tele-management tools.
- Flue Systems: Various configurations including vertical, horizontal, and outdoor outlet kits, stub-pipes, bends, extension pipes, gasket kits, clapet valve kits, and cover kits for different boiler models and installation types (open chamber, sealed chamber).
- Exhaust Manifolds: Specific kits for cascade installations (2 boilers, additional boilers) and for different flue lock sizes (DN 80, DN 125).
- Option Kits:
- Cabinet Installation: VICTRIX PRO cabinet kits and hydraulic manifold/safety kits.
- Free-Standing Installation: Support frame kits for situations where wall mounting is not feasible.
- Hydraulic Optional for Single Installation: Safety kits, three-way valve kits, hydraulic manifold kits, IPX4D protection boxes, adapter kits, anti-freeze protection kits, condensate neutralizers, condensate discharge pumps, magnetic dirt separators, and plate heat exchangers.
- Hydraulic Optional for Cascade Installation: Hydraulic manifold kits, safety kits, hydraulic separators, anti-freeze protection kits, condensate neutralizers, magnetic dirt separators, and plate heat exchangers for multi-boiler systems.
