SECOP KLE.5.6GFTX Compressor Technical Data

Model Designation: KLE.5.6GFTX

Sales Code: 106G5613

Compressor Design

Designation	KLE.5.6GFTX
Voltage/Frequency	220-240V/50Hz 1~ \| 208-230V/60Hz 1~
Oil type	Polyolester
Oil viscosity	19,2cSt
Oil quantity	240cm³ / 8,1fl.oz
Refrigerant charge - tech. limit	250g / 8,8oz
Free gas volume comp.	1535cm³ / 51,9fl.oz
Weight	9,5kg / 20,9lbs
Motor protection	external
Winding resistance main	10,7Ω (at 25°C)
Winding resistance aux	17Ω (at 25°C)
Max. winding temp.	125°C / 257°F
Max. discharge temp.	130°C / 266°F
Additional note	Good robustness against liquid intake. Ice-cube maker optimization - indirect suction intake.
Refrigerant(s)	R134a, R513A, 0
Displacement	5,6cm³ / 0,34cu.in
Compressors on pallet	100

Image Description: A black SECOP KL-Series compressor is shown, featuring a silver label and various ports. The image provides a visual representation of the compressor unit.

General Configurations with KLE.5.6GFTX

Parameter	Conf. 1	Conf. 2
Motor configuration	CSIR	CSIR
Power supply (nominal)	220-240V/50Hz	208-230V/60Hz
Number of phases	1	1
Voltage range	187-254V	198-253V
Approvals	VDE, CB, UL	VDE, CB, UL
Starting torque	HST	HST
Note	Electrical equipment is included and pre-assembled to compressor.

Applications with KLE.5.6GFTX

Parameter	Conf. 1	Conf. 2
Refrigerant	R134a	R134a
Application	LBP+MBP+HBP	LBP+MBP
System cooling	fan 3m/s ?	fan 3m/s ?
Hot gas defrost	OK ✔️	OK ✔️
Long interval pull down	OK ✔️	OK ✔️

Electrical Data - Configurations with KLE.5.6GFTX

Parameter	Conf. 1	Conf. 2
Starting device type	relay ⚙️	relay ⚙️
Run capacitor	-/-	-/-
Start capacitor	80µF	80µF
LRA (locked rotor amps / 4s/ U(N))	11,4A
RLA (rated load amps / 1s/ U(N))	1,2A
Cut in current (U(N))	10,7A

Compressor Dimensions

Dimension	Value
A Height	182mm / 7,17in
B Height	175mm / 6,89in
C Length shell	198mm / 7,8in
D Length w. cover	238mm / 9,37in
E Width	160mm / 6,3in

Diagram Description (Compressor Dimensions): A schematic illustrates the external dimensions of the compressor, labeled A (Height), B (Height - alternative), C (Length shell), D (Length with cover), and E (Width), with measurements provided in millimeters and inches.

Connectors

Parameter	Configuration
Parameter	Suction (X)	Discharge (Y)	Process (Z)
Diameter [mm] (i:inside, o:outside)	⌀i 8,11-8,29	⌀i 6,11-6,29	⌀i 6,11-6,29
Diameter [in] (i:inside, o:outside)	⌀i 0,32-0,33	⌀i 0,24-0,25	⌀i 0,24-0,25
Material	copper	copper	copper
Horizontal angle	+2°	35°	0°
Vertical angle	+2°	30°	145°
Position l/h/w [mm]	119/73/59	117/107/66	-88/101/71
Position l/h/w [in]	4,7/2,9/2,3	4,6/4,2/2,6	-3,5/4/2,8
Straight tube l. [mm]	14	14	14
Straight tube l. [in]	0,5	0,5	0,5

Diagram Description (Connectors): A diagram illustrates the three main ports: Suction (X), Discharge (Y), and Process (Z). It details their diameters in mm and inches, material (copper), and angular positions (horizontal and vertical). It also shows the position (l/h/w) and straight tube length for each connector.

Compressor Fixation

Baseplate [mm]			Baseplate [inch]
	BI	Bw	E	BI	Bw	E
	204	132	⌀ 9.7	8.03	5.2	⌀ 0.38

Large holes [mm]			Large holes [inch]
	Ll	Lw	⌀L	Ll	Lw	⌀L
	165	101.6	⌀ 19	6.5	4	⌀ 0.75

Small holes [mm]			Small holes [inch]
	Sl	Sw	⌀S	Sl	Sw	⌀S
	170	70	⌀ 16	6.7	2.76	⌀ 0.63

Diagram Description (Compressor Fixation): A diagram shows the compressor baseplate with dimensions for large and small mounting holes, indicated by Bl, Bw, E, Ll, Lw, ØL, Sl, Sw, and ØS. It also illustrates bolt joint and snap-on mounting methods, detailing components like washers, nuts, sleeves, clips, and steel pins used to secure the compressor to a cabinet base.

Mounting Accessories

Accessory Type	One Comp.	Multi Pack
Bolt joint \| M6 \| Ø16mm	118-1917	118-1918
Bolt joint \| Ø1/4" \| Ø16mm	118-1946
Bolt joint \| Ø1/4" \| Ø19mm	118-1949
Snap-on \| Ø7,3 \| Ø16mm	118-1947	118-1919

Application Notes

Provision for PE Grounding is located at the PE Stamp on the compressor.
Suction gas connector and Process connector can be switched (minor loss of cooling capacity).

Optimization + Standard Conditions

Refrigerant: R134a, Voltage/Frequency: 220V/50Hz, Motor Type: CSIR, Cooling: fan 3m/s, Approvals: VDE, CB, UL

Evaporating Pressure (Saturation Temperature)	Condensing Pressure (Saturation Temperature)	Return Gas Temp.	Liquid Temp.	Cooling Capacity			COP		EER		Power Consumption		Current Consumption	Ref. Mass Flow [kg/h]
Evaporating Pressure (Saturation Temperature)	Condensing Pressure (Saturation Temperature)	Return Gas Temp.	Liquid Temp.	[W]	[Btu/h]	[kcal/h]	[W/W]	[Btu/Wh]	[kcal/Wh]	[W]	P1	I [A]		Ref. Mass Flow [kg/h]
pe [°C] -23 [°F] -10	pc 54 130	RGT 32 90	Tliq 32 90	156,4	534	134,6	1,32	4,51	1,14	118,5	1,22	3,04	ASHRAE LBP
pe [°C] -23 [°F] -10	pc 54 130	RGT 32 90	Tliq 32 90
pe [°C] -7 [°F] 20	pc 54 130	RGT 35 95	Tliq 46 115	335,5	1146	288,7	1,92	6,55	1,65	174,9	1,37	7,32	ASHRAE MBP
pe [°C] -7 [°F] 20	pc 54 130	RGT 35 95	Tliq 46 115
pe [°C] 7,2 [°F] 45	pc 54 130	RGT 35 95	Tliq 46 115	601,5	2054	517,6	2,74	9,35	2,36	219,7	1,53	13,34	ASHRAE HBP
pe [°C] 7,2 [°F] 45	pc 54 130	RGT 35 95	Tliq 46 115
pe [°C] -35 [°F] -31	pc 40 104	RGT 20 68	Tliq 40 104	81,5	278	70,1	0,98	3,36	0,85	82,8	1,15	1,79	EN12900 LBP
pe [°C] -35 [°F] -31	pc 40 104	RGT 20 68	Tliq 40 104
pe [°C] -10 [°F] 14	pc 45 113	RGT 20 68	Tliq 45 113	289,8	990	249,4	1,92	6,56	1,65	150,8	1,30	6,78	EN12900 MBP
pe [°C] -10 [°F] 14	pc 45 113	RGT 20 68	Tliq 45 113
pe [°C] 5 [°F] 41	pc 50 122	RGT 20 68	Tliq 50 122	513,1	1752	441,6	2,52	8,62	2,17	203,2	1,47	12,93	EN12900 HBP
pe [°C] 5 [°F] 41	pc 50 122	RGT 20 68	Tliq 50 122

Performance Tables (R134a, 220V/50Hz, CSIR, fan 3m/s, VDE, CB, UL)

Condition	Cooling Capacity			COP		EER		Power Consumption		Ref. Mass Flow [kg/h]
Condition	[W]	[Btu/h]	[kcal/h]	[W/W]	[Btu/Wh]	[kcal/Wh]	[W]	P1	I [A]	Ref. Mass Flow [kg/h]
Cond. pressure pc= 45/113 Return gas temp. RGT= 32/90 Liquid temp. Tliq= 45/113	76,7	262	66,0	0,93	3,18	0,80	82,3	1,15	1,65
	135,0	461	116,2	1,23	4,21	1,06	109,5	1,20	2,93
	234,2	800	201,5	1,71	5,84	1,47	137,0	1,26	5,10
	300,6	1027	258,7	1,99	6,81	1,72	150,8	1,30	6,58
	470,6	1607	405,0	2,64	9,00	2,27	178,5	1,38	10,41
	575,3	1965	495,1	2,99	10,21	2,57	192,4	1,43	12,81
	827,6	2827	712,3	3,76	12,85	3,24	220,0	1,54	18,75
Cond. pressure pc= 55/131 Return gas temp. RGT= 32/90 Liquid temp. Tliq= 55/131	62,9	215	54,1	0,81	2,78	0,70	77,2	1,13	1,50
	114,7	392	98,7	1,02	3,47	0,88	112,7	1,20	2,74
	201,0	686	173,0	1,36	4,66	1,17	147,4	1,29	4,84
	258,7	883	222,6	1,57	5,37	1,35	164,4	1,34	6,25
	406,4	1388	349,7	2,06	7,02	1,77	197,7	1,45	9,94
	497,7	1700	428,3	2,33	7,95	2,00	213,9	1,51	12,26
	718,4	2453	618,2	2,93	10,00	2,52	245,3	1,64	18,04

General Configurations with KLE.5.6GFTX (Conf. 2)

Voltage/Frequency: 208-230V/60Hz

Parameter	Conf. 2
Motor configuration	CSIR
Power supply (nominal)	208-230V/60Hz 1~
Refrigerant	R134a
Application	LBP+MBP
Voltage range	198-253V
Starting torque	HST
Approvals	VDE, CB, UL

Ambient/Machine Room Temperatures Minimum/Maximum

Ambient temperature range: 10 - 43°C / 50 - 110°F
Machine room temperature range: 10 - 48°C / 50 - 119°F
Compressor cooling: fan 3m/s ?

Operation Pressure Range

Diagram Description (Operation Pressure Range): This graph plots Condensing Pressure (sat. temp.) in bar against Evaporation Pressure (sat. temp.) in bar. It displays the operating envelopes for "continuous operation" and "transitory operation" across various temperature ranges, indicated by lines and shaded areas.

Evaporation Pressure Range

Diagram Description (Evaporation Pressure Graph): A smaller graph showing Condensing Pressure (sat. temp.) in bar against Evaporation Pressure (sat. temp.) in bar, focusing on lower pressure ranges for operational assessment.

Electrical Accessories / Wiring Diagram

Diagram Description (Electrical Accessories / Wiring Diagram): This diagram illustrates the electrical components and their connections for the compressor. It includes a current relay (a5), a start capacitor (c), and a cover/clamp/screws assembly (b, d), showing how they are wired together.

Components (incl. and pre. assembl.)

Component	Part Number
a5 current relay (T0089/L6-S2)	117U7070
c start capacitor (80µF, 6.3mm)	117U5001
b, d cover + clamp + screws(5VA-compl.)	103N0600

Alternative Components

Component	Part Number
b, d 100x cover + clamp + screws(5VA)	103N2060
b, d cover + clamp + screws(5VA) in bag	103N1060

Optimization + Standard Conditions (Conf. 2)

Refrigerant: R134a, Voltage/Frequency: 230V/60Hz, Motor Type: CSIR, Cooling: fan 3m/s, Approvals: VDE, CB, UL

Evaporating Pressure (Saturation Temperature)	Condensing Pressure (Saturation Temperature)	Return Gas Temp.	Liquid Temp.	Cooling Capacity			COP		EER		Power Consumption		Current Consumption	Ref. Mass Flow [kg/h]
Evaporating Pressure (Saturation Temperature)	Condensing Pressure (Saturation Temperature)	Return Gas Temp.	Liquid Temp.	[W]	[Btu/h]	[kcal/h]	[W/W]	[Btu/Wh]	[kcal/Wh]	[W]	P1	I [A]		Ref. Mass Flow [kg/h]
pe [°C] -23 [°F] -10	pc 54 130	RGT 32 90	Tliq 32 90	192,7	658	165,9	1,37	4,69	1,18	140,3	1,18	3,74	ASHRAE LBP
pe [°C] -23 [°F] -10	pc 54 130	RGT 32 90	Tliq 32 90
pe [°C] -7 [°F] 20	pc 54 130	RGT 35 95	Tliq 46 115	396,6	1354	341,3	1,95	6,65	1,68	203,6	1,35	8,65	ASHRAE MBP
pe [°C] -7 [°F] 20	pc 54 130	RGT 35 95	Tliq 46 115
pe [°C] 7,2 [°F] 45	pc 54 130	RGT 35 95	Tliq 46 115	702,9	2401	605,0	2,73	9,31	2,35	257,8	1,53	15,59	ASHRAE HBP
pe [°C] 7,2 [°F] 45	pc 54 130	RGT 35 95	Tliq 46 115
pe [°C] -35 [°F] -31	pc 40 104	RGT 20 68	Tliq 40 104	99,0	338	85,2	1,07	3,66	0,92	92,3	1,09	2,17	EN12900 LBP
pe [°C] -35 [°F] -31	pc 40 104	RGT 20 68	Tliq 40 104
pe [°C] -10 [°F] 14	pc 45 113	RGT 20 68	Tliq 45 113	340,9	1164	293,4	1,91	6,54	1,65	178,1	1,27	7,98	EN12900 MBP
pe [°C] -10 [°F] 14	pc 45 113	RGT 20 68	Tliq 45 113
pe [°C] 5 [°F] 41	pc 50 122	RGT 20 68	Tliq 50 122	598,3	2043	514,9	2,48	8,46	2,13	241,6	1,47	15,08	EN12900 HBP
pe [°C] 5 [°F] 41	pc 50 122	RGT 20 68	Tliq 50 122

Performance Tables (R134a, 230V/60Hz, CSIR, fan 3m/s, VDE, CB, UL)

Condition	Cooling Capacity			COP		EER		Power Consumption		Ref. Mass Flow [kg/h]
Condition	[W]	[Btu/h]	[kcal/h]	[W/W]	[Btu/Wh]	[kcal/Wh]	[W]	P1	I [A]	Ref. Mass Flow [kg/h]
Cond. pressure pc= 45/113 Return gas temp. RGT= 32/90 Liquid temp. Tliq= 45/113	92,3	315	79,4	1,01	3,46	0,87	91,2	1,08	1,99
	165,3	565	142,3	1,30	4,43	1,12	127,3	1,15	3,58
	278,6	951	239,7	1,73	5,90	1,49	161,3	1,23	6,07
	353,6	1208	304,3	1,99	6,78	1,71	178,1	1,27	7,74
	547,6	1870	471,2	2,57	8,79	2,21	212,8	1,38	12,11
	669,1	2285	575,8	2,89	9,88	2,49	231,2	1,44	14,90
	968,2	3307	833,3	3,57	12,18	3,07	271,5	1,57	21,93
Cond. pressure pc= 55/131 Return gas temp. RGT= 32/90 Liquid temp. Tliq= 55/131	72,1	246	62,1	0,78	2,66	0,67	92,6	1,08	1,72
	141,6	484	121,9	1,05	3,60	0,91	134,3	1,16	3,39
	242,5	828	208,7	1,40	4,79	1,21	172,9	1,26	5,84
	308,1	1052	265,1	1,61	5,49	1,38	191,8	1,31	7,45
	476,4	1627	410,0	2,07	7,08	1,78	229,8	1,43	11,65
	581,9	1987	500,8	2,33	7,96	2,01	249,6	1,50	14,34
	842,3	2877	724,9	2,88	9,85	2,48	292,0	1,65	21,16

	SECOP KLE.6GFTX Compressor Technical Data Sheet Detailed technical specifications, performance data, dimensions, and configuration options for the SECOP KLE.6GFTX compressor, designed for R134a refrigerant.
	SECOP KLE.6.6GFTX Compressor Technical Data Sheet - R134a, 220V/50Hz & 208V/60Hz Detailed technical specifications, performance data, dimensions, and electrical information for the SECOP KLE.6.6GFTX compressor, compatible with R134a refrigerant and operating at 220V/50Hz and 208V/60Hz.
	SECOP KLE8.6GFTX Compressor Technical Data Sheet Detailed technical specifications, configurations, performance data, and dimensions for the SECOP KLE8.6GFTX compressor, supporting R134a and R513A refrigerants for various voltage and frequency combinations.
	Secop KLE-GFTX Compressors: Robust and Efficient Solutions for Light Commercial Refrigeration Discover the Secop KLE-GFTX series of compressors, offering premium robustness, excellent efficiency, and reduced noise and vibration for high-efficiency cabinets in food retail and food service applications. Learn about their technical specifications, performance data, and applications.
	SECOP KLE5.6GFTX Compressor Technical Data Sheet Detailed technical specifications, configurations, electrical data, dimensions, and performance tables for the SECOP KLE5.6GFTX compressor, covering operating ranges and electrical accessories for 220-240V/50Hz and 208-230V/60Hz configurations.
	SECOP KLE6.6GFTX Compressor Technical Data Sheet Detailed technical specifications, dimensions, electrical data, and performance tables for the SECOP KLE6.6GFTX compressor, compatible with R134a and R513A refrigerants. Includes configuration options and operating parameters.
	SECOP KLE8.6GFTX Compressor Technical Data Sheet Comprehensive technical specifications, performance data, dimensions, and configuration details for the SECOP KLE8.6GFTX compressor, including R134a and R513A refrigerant compatibility.
	SECOP FRK11G Compressor Technical Data Sheet - Specifications and Performance Detailed technical data sheet for the SECOP FRK11G compressor, including specifications, performance tables, and application details for R134a and R513A refrigerants across various voltage and frequency configurations.