USER MANUAL
Thank you for choosing Better Bathrooms. Please read this manual before installing your product and keep for future reference. [information]
Top Fix Soft Close Toilet Seat
Please note: Image is for illustrative purposes only and may differ slightly to the actual product.
- Single-person assembly
- Tools required
- We always recommend using professional tradespeople to install your product
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
Better Bathrooms is on a mission to bring extraordinary bathroom products, for less. From modern to traditional style ceramics, plus gorgeous fixtures, fittings and furniture to match, allowing you to fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, Better Bathrooms has received countless awards, including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product exceeds your highest expectations. However, if you experience any problems, please:
- Log in to your account and contact our customer services team via your self-serve portal: betterbathrooms.com/CustomerAccount/Login
- Contact us via: betterbathrooms.com/content/contact-us
Important information
- Please read these instructions thoroughly and retain for future reference.
- Always check for pipes and cables before drilling.
Parts
Please note that Parts are for illustrative purposes only and may differ slightly to the actual product.
- 1. Expanding Plug
- 2. Gasket
- 3. Fitting Peg
- 4. Fixing Screw
- 5. Fitting Cover
- 6. Seat/Lid Assembly
Tools required
Screwdriver
Installation
- Push the expanding plugs (part 1) into the holes on the toilet pan then place the gaskets (part 2) between fitting pegs (part 3) and toilet pan. Next, place the long screws (part 4) through the fitting pegs and gaskets and screw into the expanding plug (part 1). [Diagram 1: Illustrates inserting expanding plugs and screws into toilet pan holes. Diagram 2: Shows fitting pegs being screwed into expanding plugs.] Please note: Fit the screws loosely and do not fully tighten at this stage.
- Turn the fittings on the toilet so that they align with the holes on the seat, then push the seat onto the pegs until it clicks into place. Gently move the seat so that it aligns on the toilet pan. [Diagram 3: Shows aligning the seat fittings with the toilet pan holes. Diagram 4: Depicts pushing the seat onto the pegs until it clicks.]
- Once the seat is aligned, tighten the screws into the fittings. Once the seat is secured, remove it by pressing both buttons and lifting away. [Diagram 5: Shows tightening the fixing screws. Diagram 6: Illustrates pressing release buttons to detach the seat.]
- Place the fitting covers over the fixed fittings then push the seat onto the fitting pegs and click into position. [Diagram 7: Shows placing fitting covers. Diagram 8: Depicts pushing the seat onto the fitting pegs.]
Using
During use, do not force the seat closed as this will damage the soft close mechanism. Pull the seat and/or lid towards you slightly until it reaches the point at which it will fall under its own weight, then release.
Do not stand on the toilet seat.
Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry. Do not use any abrasive cleaning agents or materials.
It is recommended to wipe the seat and fittings on a regular basis.
Troubleshooting
Seat becomes loose after a period of use
Remove the seat and re-tighten the fittings.
Soft close mechanism stops working
The mechanism cannot be replaced. Replace the seat and lid; however, the fittings can remain fitted. Removal of seat/lid is advised in Maintenance (below).
Seat is short or overhangs the toilet pan
Align the seat lid with the front edge of the toilet pan; the fittings are adjustable.
Maintenance
To remove the seat/lid: press the two buttons at the rear of the seat and pull the seat/lid away from the fitting pegs. When replacing, ensure it clicks into place. [Diagram 9: Shows hands pressing two buttons at the rear of the seat to detach it. Diagram 10: Shows the underside of the seat fittings with screws visible.]
To access the fixing screws, remove the lid/seat as above, then pull off the covers.
For more information
- Visit: betterbathrooms.com
- Email: customerservices@buyitdirect.co.uk
- Call: 0330 390 3062
- Write to: Trident Business Park, Neptune Way, Huddersfield, HD2 1UA
Better Bathrooms is part of the BuyltDirect Group.