Key Features
- Tivoli's proprietary algorithm controls RGB+W (5000K) LEDs for superior color saturation and TRUE white performance.
- Audio enhanced with MADRIX software compatibility.
- Individually control each globe with DMX512 (3 Channels per/pixel) protocol for a unique and personalized environment.
- Each globe is auto-addressed for fast set-up and connection.
- True RGB+W Technology delivers over 16 million combinations of pure and precise color tones.
- Proprietary PCB design ensures high performance and easy replacement.
- Mounting design provides optional suspended and twist-off cap for surface applications.
- 24V DC low voltage system for long runs.
- Pre-molded twist connect male and female power leads.
- IP67 rated.
- cULus listed.
- 3 Year warranty.
Dimensions
Globe Dimensions: 2.5" (Width) x 3.8" (Height)
Order Guide
Strand Order Guide - 06" OC
Max strand run length (80 total globes each circuit): 40'
| PRODUCT CODE | WIRE | SPACING | LED TYPE | GLOBE | LENGTH | VOLTAGE |
|---|---|---|---|---|---|---|
| LST | BK = Black WH = White* |
06 = 6" OC | RGBW = Red Green Blue +White (5000K) | OP = Opal CL = Clear |
10 = 10' 20 = 20' 40 = 40' |
24 = 24V DC |
*Consult factory for MOQ and lead-time
Strand Order Guide - 12" OC
Max strand run length (80 total globes each circuit): 80'
| PRODUCT CODE | WIRE | SPACING | LED TYPE | GLOBE | LENGTH | VOLTAGE |
|---|---|---|---|---|---|---|
| LST | BK = Black WH = White* |
12 = 12" OC | RGBW = Red Green Blue +White (5000K) | OP = Opal CL = Clear |
10 = 10' 40 = 40' 80 = 80' |
24 = 24V DC |
*Consult factory for MOQ and lead-time
Strand Order Guide - 24" OC
Max strand run length (80 total globes each circuit): 160'
| PRODUCT CODE | WIRE | SPACING | LED TYPE | GLOBE | LENGTH | VOLTAGE |
|---|---|---|---|---|---|---|
| LST | BK = Black WH = White* |
24 = 24" OC | RGBW = Red Green Blue +White (5000K) | OP = Opal CL = Clear |
10 = 10' 40 = 40' 80 = 80' 160 = 160' |
24 = 24V DC |
*Consult factory for MOQ and lead-time
Specifications
| Category | 6" | 12" | 24" |
|---|---|---|---|
| EPA | 0.10 | 0.06 | 0.04 |
| Hat 8" | N/A | 0.53 | 0.28 |
| Hat 13" | N/A | N/A | 0.71 |
| Dish 10" | N/A | 0.82 | 0.42 |
| Flower 10" | N/A | 0.82 | 0.42 |
| Flower 13" | N/A | N/A | 0.71 |
| Weights (lb/ft) | 0.31 | 0.17 | 0.11 |
| lb/ft with catenary cable | 0.33 | 0.19 | 0.13 |
| Output | Red / Green / Blue / White (5000K) | ||
| Kelvin Temperature | N/A | ||
| Pixels | 1 pixel/globe | ||
| Lumens (lm/globe) | 55 (all color fully on) | ||
| Electrical | |||
| Input Voltage | 24V DC | ||
| Power Consumption (W/globe) | 1 | ||
| Maximum STRAND Run (based on O.C. spacing) | 40' @ 6" OC, 80' @ 12" OC, 160' @ 24" OC (Total 80 globes per circuit) | ||
| Control | |||
| Control System | DMX 512 (3 channel/globe) | ||
| Address Setting | Auto Addressing, Manual Addressing (factory setting only) | ||
| Physical | |||
| Dimensions | 2.5"W x 3.8"H | ||
| Socket Housing | PVC | ||
| Globe | PE | ||
| Mounting | Surface Mount, Suspended | ||
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) | ||
| Storage Temperature | -40°C to 80°C (-40°F to 176°F) | ||
| Certification and Testing | |||
| Certification | cULus | ||
| Environment | Wet Location | ||
| IP Rating | IP67 | ||
| Warranty | 3 Years | ||
Photometrics & Color Metrics
The product includes photometric data, showing light distribution patterns. It also features TM-30-15 metrics, including Rf and Rg values, CCT, Duv, and spectral power distribution (SPD) graphs, indicating color rendering quality and spectral output. A Color Vector Graphic illustrates color shifts across different hue bins.
Data Operation & Wiring Diagrams
The system supports both Online Operation (MADRIX Live) and Off-line Operation (TivoCUE or Artnet Interface). Diagrams illustrate connections involving Artnet interfaces, Ethernet switches, data boxes (ADNM-120-1-4-24-DAT), and controllers like TivoCue10.
Wiring configurations include:
- Single Run: Connects a single strand of lights to a power supply and data box.
- Multiple Runs: Shows how to connect multiple strands using a multi-circuit power supply (e.g., ADNM-320-3-4-24-DAT-3).
- Dual Runs: Illustrates connecting two separate runs from a single or dual power/data unit.
- Daisy-Chain Multiple Runs: Details connecting multiple runs within a single DMX universe using multiple data boxes.
Note: For various lead and run length combinations, consult the factory.
Warning: Follow all safety guidelines regarding installation, power, and environmental conditions. Refer to the document for specific warnings about injury or fire risks.
Accessories
Available accessories include:
- Jumper Cables (4-pin, 3-pin XLR)
- End Caps (LST-EC)
- T-Connectors (LST-T-CONN-PWR, LST-T-CONN-3P, LST-T-CONN-DSY)
- Power Leads (LST-PWR-2-X-XX)
- NETGEAR Gigabit Ethernet Switches (NTG-SWI-8PT, NTG-SWI-16PT)
- Artnet to DMX Interfaces (ARTNET-L-X-512)
*Consult factory for MOQ and lead-time.
Controls & Software
Control options include touchscreen controllers:
- TVOQ-10-XX-7: 1024 DMX channels, 500 scenes, 10 zones.
- TVOQ-2-BK: 512 DMX channels, 99 scenes, 1 zone.
- ARTNET-S-8-512: 8-port Artnet to DMX interface for online or offline control.
The system is compatible with Tivoli's Cue™ and CuePro™ software, offering advanced lighting programming capabilities.
MADRIX Software Integration
The Litesphere system integrates with MADRIX lighting control software. A MADRIX KEY (USB dongle) unlocks full software output, allowing flexible switching between PCs. License upgrades are available to increase output capabilities.
| MADRIX 5 Key & Software Cat No | Level | DMX Channels | DMX Universe Example | RGB Voxels Example | DVI Voxels | Render Resolution Example |
|---|---|---|---|---|---|---|
| MDRX-LC-5S | START | 1,024 | 2 | 341 | 4,096 | 64 X 64 PIXELS |
| MDRX-LC-5E | ENTRY | 4,096 | 8 | 1,365 | 16,384 | 128 X 128 PIXELS |
| MDRX-LC-5B | BASIC | 16,384 | 32 | 5,461 | 262,144 | 512 X 512 PIXELS |
| MDRX-LC-5P | PROFESSIONAL | 65,536 | 128 | 21,845 | 1,048,576 | 1,024 X 1,024 PIXELS |
| MDRX-LC-5U | ULTIMATE | 262,144 | 512 | 87,381 | 2,097,152 | 2,048 X 1,024 PIXELS |
| MDRX-LC-5M | MAXIMUM | 1,048,576 | 2,048 | 349,525 | 2,097,152 | 2,048 X 1,024 PIXELS |
Mounting Options
Surface/Flush Mounting
For surface mount applications, remove the top suspension-plate by turning counter-clockwise until off. Place socket flush against the desired surface and mount using proper screws according to substrate.
Suspended Mounting
Suspended mounting utilizes LS-Cable, LS-Locks with LS-UVZP, and the LS-TT (Tension Tool) for tensioning the cable wire and achieving desired sag. Adhere to local city codes for suspended applications.
Note: For suspension application, a catenary cable is required for proper installation. Contact Tivoli for recommendations on unique mounting applications.
Mounting Accessories
- LS-CABLE Kits: Catenary Cable Kits available in 60', 110', and 500' lengths, made of galvanized cable with cable locks supporting up to 200lbs.
- LS-LOCK-X Cable Lock: Heavy-duty lockable fasteners for 1/8" cable, supporting up to 200 lbs. Includes a cable release key and can be adjusted without tools. Available in packs of 2 or 4.
- LS-TT Catenary Cable Tensioning Tool: Features a 6:1 gear drive mechanism and integral torque gauge for consistent tension up to 880lbs.
- LS-UVZP-BK-XX UV Zip Ties: UV resistant, heavy-duty zip ties available in bags of 30 or 50, supporting up to 100 lbs per tie.
Light Shades
HAT Shades
- SHADE-HT-BK-BK-8: 8.3" Black Top, Black Bottom, Weight: 0.38 lb
- SHADE-HT-BK-BK-13: 12.6" Black Top, Black Bottom, Weight: 1.06 lb
- SHADE-HT-BK-CO-13: 12.6" Black Top, Copper Bottom, Weight: 1.06 lb
DISH Shades
- SHADE-DS-BK-BK-10: 10.2" Black Top, Black Bottom, Weight: 0.72 lb
FLOWER Shades
- SHADE-FL-BK-BK-10: 9.8" Light Shade, Black Top, Black Bottom, Weight: 0.54 lb
- SHADE-FL-BK-BK-13: 13.8" Light Shade, Black Top, Black Bottom, Weight: 1.1 lb
Shade Adapters
- SHADE-ADP-LSL2-XX-01: 2.0 Light Shade Adapter (BK/WH), sold individually.
- SHADE-ADP-LSL2-XX-25: 2.0 Light Shade Adapter (BK/WH), sold in packs of 25.
- SHADE-ADP-LSL2-XX-50: 2.0 Light Shade Adapter (BK/WH), sold in packs of 50.
*Consult factory for lead time and MOQ.
Replacement Parts
- LST-RGBW-24: Litesphere True RGB+W LED module.
- LST-OG: Opal globe.
- LST-CG: Clear globe.
- DMX3-CAT5-ADPTR: DMX Adapter (3-pin XLR Female to RJ45).
- LST-T-CONN-3P: T Connector (IP67) for DMX and LED connections.
- LST-DATABX: Data Box (consult factory for custom programming).
- LST-T-CONN-DSY: Daisy-Chain T Connector (IP67) for DMX and LED connections.
Power Supplies
The ADNM Series offers various power supply solutions, including all-in-one units that integrate power supply, data box, and connectors.
ADNM Series - Class 2 Transformer
| DESCRIPTION | CAT NO | APPLICATION | PRIMARY VOLTAGE | SECONDARY VOLTAGE | CIRCUIT BREAKERS | MAX LOAD | CIRCUIT CAPACITY |
|---|---|---|---|---|---|---|---|
| Class 2 Transformer | ADNM-120-1-4-24-D | Indoor / Outdoor | 100-277V AC 50/80 HZ | 24V DC | 1 | 96W | 4A |
ADNM-DAT / ALL - IN - ONE Series
These units combine Power Supply, LST Data Box, LST T-Conn, and RJ45-to-XLR connection in an outdoor-rated NEMA 3 box. Box size varies by circuit count.
| DESCRIPTION | CAT NO | APPLICATION | PRIMARY VOLTAGE | SECONDARY VOLTAGE | CIRCUIT BREAKERS | DATA BOXES | MAX LOAD | CIRCUIT CAPACITY |
|---|---|---|---|---|---|---|---|---|
| Class 2 Transformer | ADNM-120-1-4-24-DAT | Indoor / Outdoor | 100-277V AC 50/80 HZ | 24V DC | 1 | 1 | 96W | 4A |
| Class 2 Transformer | ADNM-240-2-4-24-DAT-2 | Indoor / Outdoor | 100-277V AC 50/80 HZ | 24V DC | 2 | 2 | 2x96W | 2x4A |
| Class 2 Transformer | ADNM-320-3-4-24-DAT-3 | Indoor / Outdoor | 100-277V AC 50/80 HZ | 24V DC | 3 | 3 | 3x96W | 3x4A |
ADNM-DAT-D / ALL - IN - ONE Series
These units combine Power Supply, LST Data Box, and LST T-Conn-DSY in an outdoor-rated NEMA 3 box, allowing daisy-chaining of multiple runs (up to 160 globes) to one DMX universe. Manual addressing of each Data Box must be done at the factory.
| DESCRIPTION | CAT NO | APPLICATION | PRIMARY VOLTAGE | SECONDARY VOLTAGE | CIRCUIT BREAKERS | DATA BOXES | MAX LOAD | CIRCUIT CAPACITY |
|---|---|---|---|---|---|---|---|---|
| Class 2 Transformer | ADNM-120-1-4-24-DAT-D | Indoor / Outdoor | 100-277V AC 50/80 HZ | 24V DC | 1 | 1 | 96W | 4A |
