Speediance Gym Monster 2

Safety Warnings

? indicates "prohibitions":

• Away from flammables
• Away from damp area
• Away from open flames
• No children operation
• No inferior socket

❗ indicates "musts":

• ? GROUND REQUIRED
• ?️ PROFESSIONAL MAINTENANCE PERSONNEL REQUIRED

• When removing the plug (?), do not pull the power cord; hold the plug firmly and pull it out directly from the socket. Prevent the power cord from being damaged. If damaged or worn, stop using the product.
• Do not disassemble or modify electronic elements without permission. Seek professional maintenance personnel for repairs. Contact Speediance After-sales for malfunctioning products.
• Casters are for moving on flat surfaces only. Dragging on stairs or uneven ground is prohibited.
• Use the original power cord (?) and do not share it with other appliances. Ensure the plug is firmly connected to the socket to prevent fire hazards. The socket must have a reliable grounding wire.
• This product uses AC power supply (110V~230V, 50Hz/60Hz). Voltage fluctuations exceeding 260V may cause malfunction or damage.
• When flammable gas leaks, close the valve, open doors/windows, and do not pull product plugs, as electric sparks can cause fire.
• Do not use flammables, explosives, liquids, or corrosives near the product. Do not place or use combustibles near the product to prevent conflagration.
• When discarding, send the product to a designated recycling station. Keep away from children and accidents.
• Place the product in an open area without obstacles.
• Do not clean the product by water spraying or rinsing. Do not place it in damp areas or where it can be splashed with water to maintain electrical insulation.

⚠️ indicates "notices" that may cause minor injuries or property losses:

• For safety, do not place items other than those recommended by the supplier on the product.
• After use, ensure the product is off or standby. Do not stretch hands into small gaps to avoid finger pinching. Release accessories gently.
• To avoid accidents, prevent children from accessing the product, pulling wires, handles, or operating the power button without adult supervision.
• When folding the footboard, ensure it is correctly positioned and locked to prevent personal injury or property loss from accidental drops.
• In case of power failure or cleaning, remove the power plug (?). If reconnecting, wait at least 30 seconds to prevent motor or electronic component damage from continuous starting.

Product Overview

Product Overview Diagram

The product features a main frame, touchscreen, detachable pulleys, ball connector, adjustable height mechanism, motor compartment hatch, footboard latches, and footboard with finger grooves.

• 1 Main Frame: The primary structural component.
• 2 Touchscreen: The interactive display interface.
• 3 Detachable Pulleys: Pulleys that can be attached or detached for various exercises.
• 4 Ball Connector: A connector used for attaching accessories.
• 5 Motor Compartment Hatch: Access panel for the motor.
• 6 Latches of Footboard: Mechanisms to secure the footboard.
• 7 Footboard: The platform for user support.
• 8 Finger Groove of Footboard: Grooves on the footboard for grip or handling.
• 9 Adjustable Height: Mechanism to change the height of components.

First Use

• Before first use, remove all packaging materials (carton, PE foam, paper bags) and protective film.
• Place the product in an indoor, well-ventilated area with flat, solid ground.
• Keep the product away from heat sources and direct sunlight. Do not place it in wet or watery places to prevent rust or degradation of insulation.

Considerations for Placement

Ensure adequate open space around the unit for safe operation and to avoid injury:

• UP: Reserve open space above the top.
• REAR: Maintain a distance of more than 10 cm from the wall.
• FRONT: Reserve open space.
• LEFT/RIGHT: Reserve open space.

Place the product in a dry environment; do not use it outdoors.

Connect to the Power Supply

Use a grounded outlet and ensure proper grounding.

Connect the power supply using the provided power cord (?). The on-off switch is located on the back of the machine.

After connecting the power supply, press the on-off switch to power on.

For the first use, after connecting the power supply, let the product rest for 5-10 minutes. Check for appearance defects or unusual operating noise. If any abnormality is found, turn off the power and contact Speediance after-sales service personnel.

After powering on, verify that the environment meets use standards and the footboard is flat and not tilting.

The product can be used after these inspections and confirmations.

Operation

Folding/Unfolding Footboard

The operation logic for unfolding and folding the footboard is the same.

1. Press the unlock button. The footboard is now unlocked.
2. Put down the footboard. Ensure the footboard is stable.
3. Rotate the footboard latches to lock the footboard.

Safety Notes:

• When unfolding, hold the footboard steady to avoid injuries.
• Before unfolding, check for other objects in the unfolding area to prevent safety hazards from an uneven footboard.
• After folding, ensure the unlock button is locked to prevent the footboard from accidentally falling.

Moving Adjustable Height

To adjust the height:

1. Pull out the pin to unlock the adjustable height.
2. Move the adjustable height to the desired position. It will automatically position and lock.

The main frame can be locked in the same way as the unlocking of the footboard end.

Replacing Accessories

The connector is compatible with all accessories, including handles, ankle straps, tricep rope, and adjustable barbell.

To attach/detach:

1. Unlocking: Press the button on the ball connector. The ball connector is unlocked. Detach the square ring.
2. Locking: Push up the square ring. The ball connector locks automatically.

If the ball connector becomes loose, stop using the product immediately and contact Speediance after-sales service personnel.

Unlock the Adjustable Height (Pulleys)

To change workout modes by changing the position of adjustable heights:

1. Unlock the detachable pulley.
2. Remove the detachable pulley.

The main frame can be locked in the same way as the unlocking of the footboard end.

User Registration

Touch the screen to start. Follow the instructions on the screen for registration. Registration is required for the first use.

Available on the App Store and Google Play.

• Check that all required information is shown completely on the display and that the touch function is normal.
• Strength training can be carried out according to your needs after function confirmation.

Parameters and Maintenance

Parameters

Notice: The parameters in this table are for reference only. In case of any information conflict between this table and the machine, please refer to the nameplate.

Cleaning and Maintenance

Notice: Before cleaning the product, please remove the power plug (?).

• Clean up dust on the product and ground regularly to improve heat dissipation and save energy.
• Use a soft towel or sponge dipped in clear water or a non-corrosive neutral detergent. Wipe with clean water and dry with a dry cloth. Do not turn on the power supply until the product is naturally dried.
• Prevent water droplets from entering product gaps to avoid short circuits or electrical element damage.
• Clean accessories similarly: use a soft towel or sponge with water or neutral detergent, wipe with clean water, and dry naturally. Do not use until naturally dried.
• For long-term storage, remove the power plug (?) to avoid electric shock or fire due to power cord aging.

Common Faults and Troubleshooting

Treatment of problems other than faults: If no fault is identified but the product malfunctions, cut off the power supply and contact Speediance after-sales service personnel.

For regular software issues, please check and seek solutions in "Profile".

Warranty and Service

Warranty Scope

Speediance guarantees that if the product is used, operated, and maintained according to instructions, it will be free from material and workmanship defects during the warranty period. Speediance will provide free repairs for quality issues caused by defects. If the product is beyond the warranty period or damaged due to user error, paid repairs are available. All services adhere to Speediance's after-sales warranty policy, which complies with quality standards and craftsmanship procedures. This limited warranty policy applies exclusively to Speediance products purchased from official channels or authorized dealers. After-sales services are limited and not unlimited liability.

Carefully read this warranty policy to understand terms, conditions, situations, cost sharing, risks, and repair service details.

Warranty Period

The effective warranty period starts from the product receipt date and ends at 24:00 the day before the period expires. If the receipt date cannot be provided, the warranty period is determined by the invoice issuance date or order purchase date. If valid proof of purchase is unavailable, the warranty period starts 30 days after factory delivery. Components replaced during the warranty period belong to Speediance; those replaced outside the warranty period belong to the user.

The standard warranty period is 24 months for the whole unit and 12 months for accessories.

Free Warranty Service Must Meet the Following Conditions:

1. Purchased Speediance products from Speediance official channels or authorized distributors.
2. Products experiencing non-human-induced performance failures within the specified warranty period.
3. Products purchased for personal or household use (commercial use requires a separate agreement).
4. No unauthorized disassembly, modification, or installation not guided by official instructions, and no other non-human-induced faults.
5. Provide valid proof of purchase (order number, invoice, or receipt) and product SN (serial number).

Warranty Exclusions and Contact

The Warranty Service Scope Does Not Cover the Following:

• Non-Speediance branded hardware or software (even if packaged with Speediance hardware).
• Damage from failure to follow usage instructions or data loss/damage caused by the product.
• Damage caused by non-manufacturing factors (e.g., operational errors).
• Damage from unauthorized modifications or disassembly not in accordance with official instructions.
• Damage from improper installation, use, removal, or not following official instructions/manuals.
• Damage caused by unauthorized service providers.
• Damage from mismatched or misused batteries and chargers.
• Damage from training not conducted according to user manual recommendations.
• Damage from exposure to extreme environments (high temperatures, corrosive environments).
• Damage from operating in environments with electromagnetic interference or wireless device interference.
• Damage from operating the product beyond initial strength specifications.
• Damage caused by forced training due to aging or damaged parts.
• Reliability or compatibility issues with unauthorized third-party parts.
• Damage from operating with insufficient or defective batteries.
• Data loss or damage from not operating the product according to official instructions/manuals.
• Any software programs provided with or installed on the product.
• Direct or indirect damage from installing/removing the product (e.g., damage to walls, floors, other items).
• Wear and tear, metal rust, and performance degradation from normal use.
• Damage caused by force majeure events (fire, flood, earthquake, power accidents).
• Damage from using the product for commercial purposes (gyms, hotels, multi-residential facilities, training studios).
• Third-party product failures or damages integrated into Speediance products.
• Damage caused by non-Speediance technical or other support (e.g., "how-to" questions, inaccurate setup).
• Products or parts with altered or removed identification labels.
• Cosmetic damage not caused by manufacturing or shipping (scratches, dents, discoloration).
• Damage from intentional damage or unauthorized modifications, including tampering with product operation data.

How to Get Warranty Service?

If the product fails to operate according to warranty terms within the warranty period, contact Speediance at after-sales@speediance.com within 30 days of discovering the fault. Provide valid proof of purchase (order number, invoice, receipt) and the product's SN number. Services not covered by the limited warranty policy may incur charges.

Contact Information:

Email: after-sales@speediance.com

Address: Room 1901-1907, 19th Floor, Gemdale Viseen Tower A, No.16, Gaoxin 10th South Road, High-tech Zone, Yuehai Street, Nanshan District, Shenzhen, Guangdong Province, China. Zip code: 518000.

Regulatory Compliance

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Statement

English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux CNR exempts de licence d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.