Smart Handles Product Manual

Safety Precautions

1. It is recommended to use an adapter with an output of 5V/2A when charging the handles.
2. Before charging, be sure to check if there are lint, water, or other foreign objects near the socket. Clean the area thoroughly before inserting, as failure to do so may lead to fire, electric shock, or a short circuit.
3. During charging, please avoid placing the device in high-temperature or direct sunlight areas. After charging is complete, promptly remove the charger to prevent overcharging and potential accidents.
4. Do not charge the product for an extended period without supervision. The maximum charging time should not exceed 12 hours. If left unused for a long time, please charge it to full capacity at least once every six months.
5. Please charge the product under the environment between 5°C and 35°C. Store this product within the range of -20°C to +45°C.
6. If any abnormal things occurred during charging or usage (such as unusual odors or sounds), immediately cut off the power and stop usage.
7. Please do not rub the button violently. If there is any malfunction of the smart handles or the adjustment system, please stop using it and contact Speediance Aftersales immediately.
8. Any attempt to disassemble or modify the product or damage the electronic components, such as the circuit boards, is strictly prohibited. All repairing & maintenance operations must be conducted by experts. If the power cord is damaged, it must be replaced through official channels to prevent any potential hazards.

Safety Symbols: ?️ Away from Flammable Materials, ? No Rinsing with Water, ? Away from Open Flames, ?‍?‍?‍? Away from Children, ⚠️ No Faulty Power

Basic Information

The Smart Handles feature a square ring, a strap, a charging port, and a button. The indicator light provides status information.

Indicator Status

How to Connect

To connect the Smart Handles:

1. Press the button.
2. Insert the square ring into the ball connector.

To detach:

1. Press the button.
2. Detach the square ring from the ball connector.

Awake Your Handles

Single-click the side button to awake the handles.

Bluetooth Connection/ Disconnection

When the indicator flashes, you can search for the device on a Speediance machine or via the companion App. The indicator flashes when the Bluetooth is disconnected.

How to Use

Single-click or double-click (modifiable via software) to control the weight switch.

Sleeping Mode

The device automatically disconnects Bluetooth after 120 seconds of null response.

How to Charge

A red flashing light indicates immediate charging. Charge the handles with the included Type-C cable. A 5V=2A power input is recommended. Please do not use a multi-functional cable to charge the device to prevent potential damage.

Warranty Card

Fill in the Name, Address, Tel, and Purchase Date immediately upon purchase. Stick the invoice on the back of the warranty card and keep them properly. Present the maintenance card and purchase invoice for maintenance.

Warranty Terms:

1. Speediance provides free maintenance service within a one-year warranty period, starting from the purchase date, provided the product is operated normally according to the instructions.
2. If the product is out of the warranty period and requires accessory replacement, a rational maintenance fee will be charged.
3. The warranty does not cover:
• Products without a purchase or warranty certificate (warranty card).
• Products out of the warranty period.
• Products disassembled or maintained by unauthorized personnel.
• Damage caused by misuse, negligence, or improper handling.
• Product damage or malfunction due to non-typical household use (e.g., prolonged use in harsh environments).
• Products exhibiting natural signs of wear and tear due to usage.

For detailed warranty policy information, please refer to the after-sales warranty policy on the Speediance official website.

Signature of Distributor: