Important Safety Notice
General Safety Precautions:
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep these instructions for future reference.
- When assembling products that have glass or mirrors, be very careful handling them, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products with electric cords (lamps, lights, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not designed to support the weight of a person.
- Where assembly instructions state that assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Ashley Furniture Industries, Inc. Disclaimer: Ashley Furniture Industries, Inc. disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Appearance Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Long support rod with mounting brackets | x 2 |
| B | Short support rod with mounting brackets | x 2 |
| C | Slats | x 2 |
| D | Long rod | x 1 |
| E | Cylindrical support piece | x 4 |
| F | Bolt (1/4" x 25mm) | x 8 |
| G | Screw (M4 x 30mm) | x 18 |
| H | Allen Wrench (M4) | x 1 (Not Included) |
Assembly Steps
Step 1
Attach parts A to the base using hardware F and H. Ensure all bolts are started before tightening.
Note: Do not tighten any bolts until all bolts have been started.
Step 2
Connect additional parts A and B to the frame.
Step 3
Assemble the main frame by connecting parts B.
Step 4
Attach hardware H to the frame as shown.
Step 5
Attach parts D and E to the frame.
Step 6
Secure the frame components using screws G (x2 per connection point).
Step 7
Place the slats (C) onto the assembled frame, ensuring they are evenly spaced and oriented correctly.
Step 8
Fully tighten all bolts and screws previously started. Ensure all connections are secure.
Step 9
Adjust the levelers on the bottom of the cross slat support legs. Leave a 6mm (approximately 1/4 inch) space between the leveler and the floor for proper adjustment.
Note: Always disassemble the bed prior to moving it to a new location.
