Complete Bed with Side Storage
Part #: 10528205 (02/22/24)
Life doesn't come with instructions, but this does.
A video tutorial is available. Scan the QR code or visit the provided link to watch.
Hardware
- G6 x2: Screw
- G7 x2: Bolt/Nut
- G13 x4: Screw
- G18 x4: Screw
- G26 x4: Screw
- G30 x4: Screw
- H24: Dowel
- H26 x3: Screw
Required Tool
A measuring tool is shown for reference, indicating measurements from 0 to 6 inches with markings for 1/8, 1/4, 1/2, and 3/4 inches.
Warning: This product contains small parts that present a choking hazard for children under 3 years of age. These parts are for adult assembly only and should be permanently affixed to the furniture. Any unused parts should be discarded properly.
Components
- Rail
- Center Support (3)
- Storage Unit
Note: Some parts are marked "Save for Roll Slat Assembly".
Assembly Instructions
Step 1: Option A - Right Side Storage
Attach the Rail to the Storage Unit using two G6 screws and two H24 dowels. The diagram shows the Rail being secured to the Storage Unit on the right side.
Step 2: Option B - Left Side Storage
Attach the Rail to the Storage Unit using two G6 screws and two H24 dowels. The diagram shows the Rail being secured to the Storage Unit on the left side.
Step 3: Attaching Side Panels
Attach the side panels to the central bed frame structure. This step uses two G5 screws, two G30 screws, and H24 dowels for each side panel.
Step 4: Attaching Support
Attach the long Rail component to the bed frame using four G18 screws.
Step 5: Final Assembly
Complete the bed frame assembly by connecting the remaining parts. This step uses H24 dowels and four G13 screws. A "WAY TO GO!" graphic indicates the successful completion of the assembly.