Signature Design by Ashley B733 Series Bed Assembly Instructions

Model Numbers: B733-87, B733-183, B733-84S

Important Safety Notice

READ CAREFULLY BEFORE BEGINNING ASSEMBLY!

Always use proper tools.
Follow the assembly steps in order. Do not skip any steps.
Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
Keep the instructions for future reference.
Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves – use a step ladder.
Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.

NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.

NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.

Parts List

B733-87

Part	Quantity	Description
A	1	Headboard Panel
B	1	Side Rail
C	1	Side Rail
K	8	5/16"x38mm Bolt
P	1	M4 Screw

B733-84S

Part	Quantity	Description
D	1	Drawer Assembly
E	1	Drawer Assembly
F	2	151x30x30mm Dowel
G	1	Slats
H	5	346x30x30mm Dowel

Hardware

Part	Quantity	Description
L	5	1/4"x65mm Bolt
M	6	1/4"x32mm Bolt
N	2	1/4"x38mm Bolt
P	1	M4 Screw

B733-183

Part	Quantity	Description
J	2	Support Rail

For replacement parts, visit www.ashleyfurniture.parts or email RTAParts@ashleyfurniture.com.

Assembly Steps

Step 1

Attach side rails (B and C) to the headboard panel (A) using bolts (K) and screws (P). Ensure all bolts are started before tightening.

Visual Description: The image shows the headboard panel (A) with two side rails (B and C) being attached. A magnified view shows a bolt (K) and a screw (P) being used for connection, with a circular arrow indicating tightening.

Step 2

Attach the drawer assemblies (E) to the frame.

Visual Description: The image shows the drawer assemblies (E) being positioned and attached to the main bed frame.

Step 3

Attach the other side rail (D) to the frame using bolts (L) and screws (P). Ensure all bolts are started before tightening.

Visual Description: The image shows the side rail (D) being attached to the bed frame. Magnified views show bolts (L) and screws (P) being used, with circular arrows indicating tightening.

Step 4

Insert the drawer assembly (D) into the frame.

Visual Description: The image shows the drawer assembly (D) being slid into its designated place within the bed frame.

Step 5

Attach the remaining side rails using bolts (P) and (N).

Visual Description: The image shows the attachment of the remaining side rails using bolts (P) and (N). Magnified views illustrate the connection points and hardware.

Step 6

Attach the support rails (J) to the headboard and footboard.

Visual Description: The image shows the support rails (J) being connected to the headboard and footboard sections of the bed frame.

Step 7

Place the slats (G) onto the support rails (H) and secure them using bolts (M) and (H).

Visual Description: The image shows the slats (G) being laid across the support rails (H). Bolts (M) and dowels (H) are shown for securing the slats.

Step 8

Turn the adjustable levelers on the bottom of the cross-slat support legs, leaving a 6mm space between the leveler and the floor.

Visual Description: The final image shows the assembled bed. A note indicates to turn the adjustable levelers on the bottom of the cross-slat support legs, leaving a 6mm space between the leveler and the floor.

NOTE: Always disassemble the bed prior to moving to a new location.

	Signature Design by Ashley B733 Series Bed Assembly Instructions This document provides assembly instructions for the Signature Design by Ashley B733 series bed, including models B733-77, B733-74, B733-78, B733-76, B733-95, B733-98, and B733-99. It includes important safety notices, a parts list with diagrams, and step-by-step assembly guidance in multiple languages.
	Signature Design by Ashley B733 Series Assembly Instructions Comprehensive assembly guide for Signature Design by Ashley B733 series furniture, including safety precautions, parts list, and step-by-step instructions for models B733-77, B733-74, B733-78, B733-76, B733-95, B733-98, B733-99.
	Signature Design by Ashley Bunk Bed Assembly Instructions Comprehensive assembly instructions and safety warnings for the Signature Design by Ashley Bunk Bed, model B733-58P, 58R. Includes parts list, assembly steps, and important safety guidelines for proper use.
	Signature Design by Ashley B733-50 Bunk Bed Assembly Instructions Comprehensive assembly instructions and safety guidelines for the Signature Design by Ashley B733-50 bunk bed. Includes a detailed parts list and step-by-step assembly guidance for various configurations.
	Ashley B388-62 Bed Frame Assembly Instructions & Safety Guide Official assembly instructions and critical safety information for the Ashley B388-62 bed frame by Signature Design by Ashley. Includes step-by-step guidance for proper construction.
	Lodanna B214 Bedroom Furniture Collection by Signature Design by Ashley Explore the Lodanna B214 bedroom collection from Signature Design by Ashley, featuring a modern gray finish, crystal-tufted headboards with LED lighting, faceted chrome accents, and integrated USB/Qi charging on nightstands. Available in Queen, King, and Full sizes, including headboards, footboards (panel and storage options), and rails.
	Signature Design by Ashley B436-72 Full Panel Bed Assembly Instructions Detailed assembly instructions for the Signature Design by Ashley B436-72 Full Panel Bed, including safety guidelines, parts list, and step-by-step assembly procedures.
	Complete Bed with Side Storage Assembly Instructions - Signature Design by Ashley Detailed assembly instructions for the Signature Design by Ashley Complete Bed with Side Storage (Model 10528205). Learn how to assemble your new bed with clear steps, hardware identification, and component guides.