PowerWalker VI 650-3000 LCD Quick Guide

I. Front Panel

Panel LCD

The front panel features an LCD display and a power switch.

1. Input Voltage: Displays the input voltage.
2. Output Voltage: Displays the output voltage.
3. AC Mode Indicator: Blinks to signal AVR (Automatic Voltage Regulation) mode.
4. Battery Mode Indicator: Signals when the UPS is operating on battery power.
5. Load Level Indicator: Blinks to indicate overload.
6. Battery Capacity Indicator: Blinks to signal a low battery level.

Power Switch: Used to turn the UPS on or off.

II. Rear Panel

The rear panel configurations vary by model:

VI 650-850 LCD

1. Outlets: Sockets for connecting devices.
2. AC Input: Connection for AC power.
3. RJ45 Surge Protection: Protects against power surges via RJ45 connection.
4. USB Port: For communication or charging.

VI 1000 LCD

1. Outlets: Sockets for connecting devices.
2. AC Input: Connection for AC power.
3. Automatic Switch: Likely a circuit breaker or reset switch.
4. Surge Protection: Protects against power surges.

VI 1500/2000 LCD

1. Outlets: Sockets for connecting devices.
2. AC Input: Connection for AC power.
3. Automatic Switch: Likely a circuit breaker or reset switch.
4. RJ45 Surge Protection: Protects against power surges via RJ45 connection.

VI 3000 LCD

1. Outlets: Sockets for connecting devices.
2. AC Input: Connection for AC power.
3. Automatic Switch: Likely a circuit breaker or reset switch.
4. Surge Protection: Protects against power surges.

III. UPS Audible Alarms

UPS switching from AC to battery mode: Beeps every 10 seconds.
Low battery level: Beeps every second.
UPS overload: Beeps every 0.5 seconds.
Damaged battery: Beeps every 2 seconds.
Other faults: Continuous beeping.

IV. Technical Specifications

Model	VI LCD Series
INPUT
Voltage Range	162~290 VAC
Frequency Range	50/60Hz±1Hz
OUTPUT
Voltage Regulation	+/-10%
Transfer Time	Typical 2-6 ms, max. 10 ms.
Waveform	Simulated Sine Wave
Protection	Short circuit and overload protection
ENVIRONMENT
Humidity	0-90% RH at 0-40° C (non-condensing)
Noise Level	Less than 40 dB

Model Comparison

Model	VI 450 LCD	VI 650 LCD	VI 850 LCD
Power (VA/W)	450 VA / 240 W	650 VA / 360 W	850 VA / 480 W
Battery	12V / 4.5Ah x 1	12V / 7Ah x 1	12V / 9Ah x 1
Charging Time	4-6 hours to return to 90% capacity.
Protection	Protection against discharge and overcharge
Runtime (120W)	5 min	10 min	15 min
Dimensions (LxWxH)	287 mm x 100 mm x 142 mm

Model	VI 1000 LCD	VI 1500 LCD	VI 2000 LCD	VI 3000 LCD
Power (VA/W)	1000VA / 600W	1500VA / 900W	2000VA / 1200W	3000VA / 1800W
Battery	12V / 7Ah x 2	12V / 9Ah x 2	12V / 9Ah x 2	12V / 9Ah x 4
Charging Time	4-6 hours to return to 90% capacity.
Protection	Protection against overload, discharge, and overcharge
Runtime (240W)	11 min	18 min	20 min	40 min
Dimensions (LxWxH)	350x146x160 mm	397mm x 146mm x 205 mm	495 mm x 150 mm x 250 mm

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 2 Pages, 612.13KB

PowerWalker VI 650-3000 LCD - Quick Guide PL Microsoft Word 2010

Related Documents

	PowerWalker Basic VI STL Series UPS User Manual User manual for the PowerWalker Basic VI STL Series Uninterruptible Power Supply (UPS), covering safety instructions, installation, operation, technical specifications, and troubleshooting.
	PowerWalker Basic VI STL Series User Manual User manual for the PowerWalker Basic VI STL Series UPS, covering safety instructions, installation, operation, technical specifications, and troubleshooting.
	PowerWalker VI 500-1500 THID: Guía Rápida y Especificaciones Técnicas Guía rápida para los Sistemas de Alimentación Ininterrumpida (SAI) PowerWalker VI 500-1500 THID. Incluye información sobre el panel frontal y trasero, configuración LCD, indicadores de audio, reemplazo de baterías y especificaciones técnicas detalladas.
	PowerWalker 1000VA/1500VA Line Interactive Sinewave UPS User Manual This user manual provides detailed information on the PowerWalker 1000VA and 1500VA Line Interactive Sinewave UPS models, including safety instructions, installation, operation, battery replacement, troubleshooting, and technical specifications.
	Руководство пользователя PowerWalker VI серии STL: Безопасность, установка и эксплуатация Полное руководство пользователя для источников бесперебойного питания PowerWalker VI серии STL (модели 600-2200 ВА). Содержит важные инструкции по безопасности, шаги установки, основные операции, технические характеристики и устранение неисправностей.
	PowerWalker Basic VI STL Series UPS User Manual and Specifications Comprehensive user manual for the PowerWalker Basic VI STL Series UPS, covering installation, operation, troubleshooting, and technical specifications for models 600 to 2200.
	PowerWalker VI STL Series UPS User Manual Comprehensive user manual for the PowerWalker VI STL series of Uninterruptible Power Supplies (UPS), covering models 600, 800, 1000, 1200, 1500, and 2200. Provides detailed information on installation, operation, safety precautions, troubleshooting, technical specifications, and software management.
	Instrukcja Obsługi PowerWalker Basic VI STL UPS Przewodnik użytkownika dla serii zasilaczy bezprzerwowego zasilania (UPS) PowerWalker Basic VI STL. Zawiera instrukcje bezpieczeństwa, instalacji, obsługi i rozwiązywania problemów dla modeli 600-2200VA.