4Modernhome T226 Lamp Instruction Manual
Model: T226
Welcome and Support
Dear Customer,
Thank you for choosing 4Modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Additionally, you can scan the provided QR code for an installation video to assist you further. Once again, thank you for choosing 4Modernhome!
Best regards,
[4Modernhome/Support Team]
General Information & Assembly Tips
To better protect the lampshade from damage during transportation, it arrives rolled, and you may notice wrinkles or creases on the edges when you first put it up. Do not be alarmed; this is not a permanent issue or defect. Be prepared for the possibility that it may take several days or weeks for the lampshade to regain its natural shape.
Assembly Steps:
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket (B) into the body (A) until tight.
- Place the harp (D) onto the saddle (C).
- Place the shade (E) onto the harp (D).
- Tighten the finial (F) into the harp (D) until tight.
Initial Setup:
- First, assemble the shade by attaching the sides together using Velcro. Align the frame with the edge of the lampshades and secure it in place using fasteners. Repeat the process for the second frame. Ensure that the frames are firmly attached and the lampshades are tightly stretched.
- Install the harps onto the lamp base by positioning them over the sockets. Next, insert the bulb into the socket and rotate it clockwise until it is securely in place. (Bulbs are not included).
- Once the lampshade is positioned correctly, screw the finial into place to hold it securely. (If the lamp shade is slanted, adjust the base of the finial to make it level).
Diagram 1 Description: Illustration showing how to attach the sides of the lampshade together using Velcro fasteners.
Diagram 2 Description: Illustration depicting the installation of the lamp harp over the socket, followed by screwing in the bulb clockwise.
Diagram 3 Description: Illustration showing the adjustment of the finial to ensure the lampshade is level.
[QR code for installation video]
Made in China
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Saddle | 1 |
| D | Harp | 1 |
| E | Shade | 1 |
| F | Finial | 1 |
Safety Warnings and Precautions
General Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
California Residents Proposition 65: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Installation Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
CAUTION: Risk of fire. LN [Live Neutral terminals]. Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
Technical Specifications
Applicable bulb type: A19, A60, T45, ST58... (Excluding bulb)
