4ModernHome T81 Instruction Manual
4ModernHome
Lampshade Assembly and Care
To better protect the lampshade from damage during transportation, it arrives rolled. You may notice wrinkles or creases on the edges when you first put it up. Do not be alarmed; this is not a permanent issue or defect. Be prepared for the possibility that it may take several days or weeks for the lampshade to regain its natural shape.
First, assemble the shade by attaching the sides together using Velcro. Align the frame with the edge of the lampshades and secure it in place using fasteners. Repeat the process for the second frame. Ensure that the frames are firmly attached and the lampshades are tightly stretched.
Lamp Assembly
Install the harps onto the lamp base by positioning them over the sockets. Next, insert the bulb into the socket and rotate it clockwise until it is securely in place. (Bulbs are not included).
Once the lampshade is positioned correctly, screw the finial into place to hold it securely. If the lamp shade is slanted, adjust the base of the finial to make it level.
Made in China.
Scan the QR code for an installation video.
Customer Support and Warnings
Thank you for choosing 4ModernHome. For any questions or issues, please contact support@4modernhome.com or call 469-312-6428. Your feedback is valued. A QR code is provided for an installation video.
Warning: If special control devices are used, follow instructions carefully for full compliance with N.E.C. requirements. Contact a qualified electrician for questions.
Warning: California Residents Proposition 65: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to have an electrician install this light. Ensure electricity is turned off at the main circuit breaker before installation. All glass is fragile; handle glass components and lamps with care.
Product Specifications
Applicable bulb type: A19, A60, T45, ST58... (Bulb not included).
Caution: Risk of Fire
Please read all instructions carefully. Before proceeding with installation, ensure the power supply is turned off and remains off until installation is completed.
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Harp | 1 |
| D | Shade | 1 |
| E | Finial | 1 |
Assembly Steps
- Unpack all parts from cartons carefully.
- Carefully pull out excess power cord from the lamp base during assembly to prevent it from becoming twisted.
- Tighten the lamp socket (B) into the body (A) until tight.
- Place the harp (C) onto the lamp socket (B).
- Place the shade (D) onto the harp (C).
- Tighten the finial (E) into the harp (C) until tight.
