Dear Customer,
Thank you for choosing 4Modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a product review on the platform where you made the purchase. Once again, thank you for choosing 4Modernhome!
Best regards,
[4Modernhome/Support Team]
Warning: California Residents
If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
This product can expose you to a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Assembly Instructions
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming kinked.
- Tighten the tube(B) into the base(A) until tight.
- Tighten the tube(C) into the tube(B) until tight.
- Tighten the tube(D) into the tube(C) until tight.
- Tighten the tube(E) into the tube(D) until tight.
- Tighten the arm(F) into the tube(E) until tight.
- Tighten the Lamp socket(G) into the arm(F) until tight.
- Place the harp(H) into the lamp socket(G).
- Tighten the finial(J) into the harp(H) until tight.
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Base | 1 |
| B | Tube | 1 |
| C | Tube | 1 |
| D | Tube | 1 |
| E | Tube | 1 |
| F | Arm | 1 |
| G | Lamp socket | 1 |
| H | Shade | 1 |
| I | Finial | 1 |
CAUTION: Risk of fire
Please read all instruction carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
Diagram Description
The diagram illustrates the assembly of the F241 lamp. It shows a base, followed by four interconnected tubes stacked vertically. An arm extends from the top tube, holding a lamp socket. A harp is inserted into the lamp socket, and a finial secures the shade to the harp. The parts list provides codes (A through I) corresponding to each component: Base, Tube (multiple), Arm, Lamp socket, Shade, and Finial.
