F262 Instruction Manual
4Modernhome
Lampshade Care and Initial Setup
To protect the lampshade from damage during transportation, it arrives rolled. You may notice wrinkles or creases on the edges when you first put it up. This is not a permanent issue or defect. Allow several days or weeks for the lampshade to regain its natural shape.
Step 1: Lampshade Assembly
First, assemble the shade by attaching the sides together using Velcro. Align the frame with the edge of the lampshade and secure it in place using fasteners. Repeat this process for the second frame. Ensure that the frames are firmly attached and the lampshades are tightly stretched.
Step 2: Harp and Bulb Installation
Install the harps onto the lamp base by positioning them over the sockets. Next, insert the bulb into the socket and rotate it clockwise until it is securely in place. Bulbs are not included.
Step 3: Final Adjustment
Once the lampshade is positioned correctly, screw the finial into place to hold it securely. If the lampshade is slanted, adjust the base of the finial to make it level.
Customer Information and Safety Warnings
Dear Customer: Thank you for choosing 4Modernhome! We appreciate your business. Should you have any questions or encounter any issues, please contact us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction. We encourage you to share your experience by leaving a brief product review. You can scan the provided QR code for an installation video to assist you further.
Important Safety Information:
- Special Control Devices: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
- California Proposition 65 Warning: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
- General Installation Caution: It is highly recommended to have an electrician install this light. Please ensure the electricity is turned off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass components and/or lamps.
CAUTION: Risk of fire. Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Base | 1 |
| B | Tube | 1 |
| C/D/E | Tube | 3 |
| F | Elevating screw | 1 |
| G | Retractable tube | 1 |
| H | Saddle | 1 |
| I | Harp | 1 |
| J | Shade | 1 |
| K | Finial | 1 |
Detailed Assembly Instructions
Applicable bulb type: A19, A60, T45, ST58... (Excluding bulb)
- Unpack all parts from carton carefully.
- Tighten the tube (B) into the base (A) until tight.
- Carefully pull out excess power cord from the tube (B) while assembling to prevent the cord from becoming twisted.
- Tighten the tube (C) into the tube (B) until tight.
- Tighten the tube (D) into the tube (C) until tight.
- Tighten the tube (E) into the tube (D) until tight.
- Tighten the retractable tube (G) into the tube (E) until tight.
- Adjust the height of the retractable tube (G) by using the elevating screw (F).
- Place the harp (I) onto the saddle (H).
- Place the shade (J) onto the harp (I).
- Tighten the finial (K) into the harp (I) until tight.
MADE IN CHINA
