Description
Single pole & 3-Way
Dimmable LED/CFL/FLR; 450W, 120V/AC; 600W, 277V/AC
HAL/INC/MLV/ELV; 720W, 120V/AC; 1000W, 277V/AC
Design Features
- Dual rated for 120V/AC and 277V/AC. Suitable for commercial and residential applications
- Universal dimming of most common dimmable lighting loads (phase-cut)
- Preset feature allows user to return to previous light level when turning lights ON
- Integrated full-slide control for easy, precise operation
- Device can be wired into either 3-Way location (load side or line side)
- Neutral is not required for installation of device
- Adjustable low-level trim setting for increased lamp compatibility
- Radio frequency interference filtering is standard on all models
- Electrostatic discharge protection
- Precise color matching
- Compatible with any decorator wallplate or screwless decorator wallplate (wallplate not included)
Applications
The Universal Slide Dimmer provides a high wattage and dual-rated solution for commercial lighting control installations. With its updated industrial design, this dimmer provides a modern and consistent look to match most interior designs. The dimmers with full range linear slide dimming are rated for wattages up to 600W (@277V/AC) for dimmable LED/CFL and fluorescents as well as 1000W (@277V/AC) incandescents, halogen, magnetic low voltage and electronic low voltage. These dimmers are ideal for commercial as well as residential applications and are compatible with Eaton's decorator style devices and wall plates. The preset ON/OFF switch automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both single-pole (one location) and 3-Way (multi-location) applications and features low-end trimming for increased lamp compatibility.
Specifications
| Catalog No. | Device Type | Wiring Type | Testing & Code Compliance | Environmental Specifications | Electrical Specifications | Mechanical Specifications |
|---|---|---|---|---|---|---|
| SUT7 | Universal slide dimmer | Back & side wire |
|
|
|
|
Materials
| Catalog No. | Top Housing | Bottom Housing | Strap | Form Factor | Finish |
|---|---|---|---|---|---|
| SUT7 | Polycarbonate | Polycarbonate | Aluminum | Decorator | Gloss |
De-Rating Chart - 120V/AC Applications Only
| Lamp Type | 1-Gang | 2-Gang | 3-Gang + |
|---|---|---|---|
| LED/CFL/FLR | 450W max. | 450W max. | 450W max. |
| INC/HAL/MLV/ELV | 720W max. | 600W max. | 500W max. |
No de-rating required for 277V/AC application
Color Ordering Information
For ordering devices, include Catalog no. followed by the Color suffix: BK (Black), GY (Gray), LA (Light Almond), V (Ivory), W (White)
| BK (Black) | GY (Gray) | LA (Light Almond) | V (Ivory) | W (White) |
|---|---|---|---|---|
Product Dimensions
Figure 1. SUT7 Line Art with Dimensions: Shows the physical dimensions of the SUT7 dimmer. Height: 4.20 inches (106.7mm), Width: 3.28 inches (83.3mm), Depth: 2.45 inches (62.1mm). Includes labels for TOP, INSTALLED LED/CFL/FLR, FOR PERMANENT CFL, ELV, MLV, FIXTURES ONLY, and CAT No SUT7.
Wiring Diagrams
Single-Pole Wiring Diagram
For INC, HAL, LED/CFL, FLR, MLV, ELV. Shows connections for Green or Bare wire (Ground/TOP), Black Thumbwheel (Hot), Slider (Load), and White (Neutral). Line connection is 120/277V/AC - 60 Hz. Note: Location of terminal screws are color-coded with "BK" or "YL".
3-Way Wiring Diagram
For INC, HAL, LED/CFL, FLR, MLV, ELV. Shows connections for Green or Bare wire (Ground/TOP), Black Thumbwheel (Hot), Slider (Load), White (Neutral), and Travelers (YL). Line connection is 120/277V/AC - 60 Hz. Note: 3-way switch must be used at the other locations.
Certifications & Compliances
Catalog No. SUT7
KEY: cULus, NOM, ANCE
