Quoizel Lighting Installation Guide for KEE8624MBK

Safety Information

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING

• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).

Tools Required

• [step ladder]
• [pliers]
• [wire strippers]
• [Phillips screwdriver]
• [flathead screwdriver]
• [tape measure]
• [safety glasses]
• [electrical tape]

Care and Maintenance

Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.

For further assistance, call Quoizel Customer Care at 1-800-645-3184 (9:00 AM - 5:00 PM EST), or visit www.quoizel.com.

Package Contents

• A: Fixture Body x 1
• B: Glass Shade x 3
• C: Glass Holder [pre-assembled to Fixture Body] x 3
• D: Steel Collar [pre-assembled to Fixture Body] x 3
• E: Socket Collar [pre-assembled to Fixture Body] x 3
• F: Socket Collar Tool x 1

Mounting Hardware

• AA: Crossbar Assembly x 1
• BB: Mounting Screw x 2 (Includes 2 alternative screws)
• CC: Wire Connector x 3
• DD: Outlet Box Screw x 2

Installation

Step 1: Install Crossbar Assembly

Secure the Crossbar Assembly (AA) to the outlet box using the provided Outlet Box Screws (DD). The crossbar should be oriented to support the fixture. Alternative screws (BB) are provided if needed to replace pre-assembled mounting screws.

Step 2: Wiring

Connect the wires from the fixture to the corresponding wires from the electrical supply:

• White wire from fixture to White wire from supply.
• Black (or red) wire from fixture to Black (or red) wire from supply.
• Ground wire from fixture to Ground wire from supply, securing to the green ground screw.

Use Wire Connectors (CC) for all wire connections.

Step 3: Install Glass Shade

Attach the Glass Shades (B) to the fixture. This involves using the pre-assembled Glass Holders (C), Steel Collars (D), and Socket Collars (E). The Socket Collar Tool (F) may be used to secure the socket collars.

Step 4: Install Fixture Body

Mount the main fixture body onto the installed crossbar assembly. Ensure all wiring is neatly managed and connections are secure.

Step 5: Install Bulbs

Install three correct bulbs into the sockets, referring to fixture markings and/or labels for maximum wattage. Recommended Bulb Type: Medium (E26) base, Type A, up to 100W.