INSTALLATION GUIDE FOR QP6161MBK

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, install or operate the product.

⚠️ WARNING

• ⚡ RISK OF ELECTRIC SHOCK

  Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.

• ? RISK OF FIRE

  Use bulbs specified by the markings and/or labels on the fixture.

⚠️ CAUTION

• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).

TOOLS REQUIRED

The following tools are typically required for installation:

• Ladder
• Diagonal cutting pliers
• Slip-joint pliers
• Phillips head screwdriver
• Wire strippers/cutters
• Electrical tape
• Wire connectors (provided)

CARE AND MAINTENANCE

Wipe clean using a soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean the fixture, as they may damage the finish.

For further assistance, call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at www.quoizel.com.

PACKAGE CONTENTS

• Fixture Loop with Rod (A) x 1
• Fixture Body (B) x 1

MOUNTING HARDWARE

• Crossbar Assembly (AA) x 1
• Wire Connector (BB) x 3
• Outlet Box Screw (CC) x 2
• Ceiling Canopy (DD) x 1
• Quick Link (EE) x 2
• Fixture Chain (FF) x 1

INSTALLATION

Step 1: Thread Fixture Loop with Rod to Fixture Body

Screw the Fixture Loop with Rod (A) into the top of the Fixture Body (B) until securely tightened.

Step 2: Install Crossbar Assembly

Attach the Crossbar Assembly (AA) to the electrical outlet box in the ceiling using the Outlet Box Screws (CC). Ensure the crossbar is oriented correctly to support the fixture. Attach the Canopy Lock Ring to the crossbar.

Step 3: Install Fixture Chain

Attach one end of the Fixture Chain (FF) to the Fixture Loop (A) using a Quick Link (EE). Attach the other end of the Fixture Chain to the Canopy Lock Ring using another Quick Link (EE).

OPTIONAL: Adjust Chain as desired, using pliers and soft cloth (neither included).

Suggested chain length for Ceiling height:

• 8 feet ceiling: use 11 links of chain and 2 quick links
• 9 feet ceiling: use 21 links of chain and 2 quick links
• 10 feet ceiling: use 31 links of chain and 2 quick links

Step 4: Pull Supply Wires

Pull the electrical supply wires (hot, neutral, and ground) from the ceiling through the alternate links of the installed Fixture Chain.

Step 5: Wiring

Connect the wires according to standard electrical practices:

• Connect the White wire from the supply to the Ribbed side of the wire from the fixture, identified with the label "N".
• Connect the Black (or Red) wire from the supply to the Smooth side of the wire from the fixture, identified with the label "L".
• Connect the Ground wire from the supply to the Green ground wire from the fixture, identified with the label "G".
• Use the provided Wire Connectors (BB) for all connections.

Step 6: Install Ceiling Canopy

Slide the Ceiling Canopy (DD) over the Fixture Chain and wires. Secure the canopy to the Canopy Lock Ring on the Crossbar Assembly. The shape of the ceiling canopy may vary depending on the specific item purchased.

Step 7: Install Bulbs

Install five correct bulbs referring to fixture markings and/or labels for maximum wattage.

Recommended Bulb Type (not included):

• BULB BASE TYPE: Medium (E26)
• BULB TYPE: TYPE A
• Maximum Wattage: 100W MAX

Your installation is now complete! Restore electricity and save this sheet for future reference.