Quoizel BTC1512MBK Installation Guide
Released Date: 2022-01-17
SAFETY INFORMATION
WARNING
- ⚡ RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- ? RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
?️ TOOLS REQUIRED
Tools typically needed for installation include: Pliers, Screwdriver, Wire Strippers, Ladder, Electrical Tape.
CARE AND MAINTENANCE
- Wipe clean using a soft, dry cloth or static duster.
- Always avoid using harsh chemicals and abrasives to clean the fixture, as they may damage the finish.
- For further assistance, call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit www.quoizel.com.
? PACKAGE CONTENTS
- A Fixture Body X 1
- B Socket Collar [Pre-assembled to Fixture Body] X 1
- C Glass Shade X 1
? MOUNTING HARDWARE
- AA Crossbar Assembly X 1
- BB Wire Connector X 3
- CC Outlet Box Screw X 2
- DD Quick Link X 2
- EE Fixture Chain X 1
- FF Ceiling Canopy X 1
⚙️ INSTALLATION
1 Install Crossbar Assembly
Attach the Crossbar Assembly to the outlet box using the provided Outlet Box Screws (CC). Slide the Canopy Lock Ring onto the Crossbar Assembly.
Diagram Description: Shows the crossbar assembly being screwed into the outlet box, with the canopy lock ring positioned above it.
2 Install Fixture Chain
OPTIONAL: Adjust the chain length as desired using pliers and a soft cloth (neither included).
Suggested chain length based on ceiling height:
- 8 feet ceiling: use 12 links of chain and 2 quick links.
- 9 feet ceiling: use 22 links of chain and 2 quick links.
- 10 feet ceiling: use 32 links of chain and 2 quick links.
Note: The Ceiling Canopy shape may vary depending on the specific item purchased.
Diagram Description: Illustrates attaching the fixture chain to the fixture body and then to the ceiling canopy, showing how to adjust chain length.
3 Pull Supply Wires
Pull the supply wires, along with the ground wire, through the alternate links of the installed fixture chain.
Diagram Description: Shows the electrical wires being threaded through the links of the fixture chain.
4 Wiring
Connect the wires according to standard electrical practices:
- Connect the supply's white wire to the fixture's ribbed wire (identified with the label "N").
- Connect the supply's black (or red) wire to the fixture's smooth wire (identified with the label "L").
- Connect the supply's ground wire to the fixture's ground wire (identified with the label "G").
- Use Wire Connectors (BB) to secure all connections. Ensure they are tight.
Diagram Description: Depicts the wiring connections: white to white (N), black to black (L), and ground to ground (G), using wire connectors.
5 Install Ceiling Canopy
Note: The Ceiling Canopy shape may vary depending on the specific item purchased.
Slide the Ceiling Canopy over the Canopy Lock Ring and secure it. Ensure the canopy is flush against the ceiling to cover the electrical box and mounting hardware.
Diagram Description: Shows the ceiling canopy being slid over the mounting hardware and canopy lock ring, covering the electrical connections.
6 Install Glass Shade and Bulb
Install the correct bulb, referring to the fixture markings and/or labels for maximum wattage.
Recommended Bulb Type (not included):
- Bulb Base Type: Medium (E26)
- Bulb Type: TYPE A
- Maximum Wattage: 100W MAX
Carefully attach the Glass Shade (C) to the fixture body. Ensure it is securely fastened.
Diagram Description: Illustrates inserting the bulb into the socket and then attaching the glass shade to the fixture.
Your installation is now complete! Restore electricity and save this sheet for future reference.
Quoizel | Artisans In Lighting
