Safety Information
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING: RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
WARNING: RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION: For your safety, read instructions completely before beginning installation.
If in doubt about electrical installation, consult a licensed electrician.
Turn off electricity to fixture before replacing the bulb(s).
Tools Required
Tools typically needed for installation include: Ladder, Pliers, Screwdrivers (Phillips and Flathead), Wire Strippers, Tape Measure, Wire Cutters, Utility Knife.
Care and Maintenance
Wipe clean using a soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean the fixture, as they may damage the finish.
For further assistance, contact Quoizel Customer Care at 1-800-645-3184 (9:00 am - 5:00 pm EST) or visit www.quoizel.com.
Package Contents
- A Fixture Loop x 1
- B Top Cover x 1
- C Nipple x 1
- D Lock Screw [pre-assembled to Fixture Body] x 2
- E Fixture Body x 1
- F Top Glass Panel x 4
- G Bottom Glass Panel x 4
- H Cage x 1
Mounting Hardware
- AA Crossbar Assembly x 1
- BB Wire Connector x 3
- CC Outlet Box Screw x 2
- DD Ceiling Canopy x 1
- EE Quick Link x 2
- FF Fixture Chain x 1
Installation Steps
Step 1: Install Bottom Glass Panels
Insert the bottom glass panels into the fixture body. Ensure the tabs on the glass panels align correctly with the slots in the fixture body.
Step 2: Install Top Glass Panels
Insert the top glass panels into the top frame of the fixture. Ensure the tabs on the glass panels align correctly with the slots in the frame.
Step 3: Install Top Cover and Finial
Attach the top cover and finial assembly to the top of the fixture body.
Step 4: Install Bulbs
Install three correct bulbs, referring to the fixture markings and labels for maximum wattage. Recommended Bulb Type: Candelabra (E12) base, Type B shape, 60W maximum.
Step 5: Install Cage with Bottom Glass Panels
Attach the cage to the main fixture body, which now contains the bottom glass panels.
Step 6: Install Crossbar Assembly
Mount the crossbar assembly securely to the electrical outlet box in the ceiling.
Step 7: Install Fixture Chain
Attach the fixture chain to the fixture loop. Connect the other end of the chain to the canopy lock ring. The ceiling canopy shape may vary depending on the item purchased. Optional: Adjust chain length as desired using pliers and a soft cloth. Suggested chain lengths for different ceiling heights: 8 ft ceiling: use 7 links of chain and 2 quick links; 9 ft ceiling: use 17 links of chain and 2 quick links; 10 ft ceiling: use 27 links of chain and 2 quick links.
Step 8: Pull Supply Wires
Pull the supply wires (including the ground wire) through the alternate links of the fixture chain.
Step 9: Wiring
Connect the wires: White supply wire to the fixture's white wire (identified with label "N" or ribbed side). Black (or red) supply wire to the fixture's black wire (identified with label "L" or smooth side). Connect the ground wire from the supply to the fixture's green ground wire (identified with label "G").
Step 10: Install Ceiling Canopy
Slide the ceiling canopy up the chain and secure it to the ceiling, covering the electrical connections. The ceiling canopy shape may vary depending on the item purchased.
Your installation is now complete! Restore electricity and save this sheet for future reference.
Quoizel | Artisans In Lighting
