SCA Full HD 1080P Dash Cam
Value you can trust
Owners/Instruction Manual
PLU 557209
Product overview
Thank you for purchasing the SCADVR18 FULL HD 1080P Dash Cam. This Dash Cam is specifically designed for real time video and audio recording when driving. The Dash Cam simply mounts to the windscreen and records footage onto a Micro SD memory card. It has a G-sensor with adjustable sensitivity and loop recording functionality.
Product features
- FHD 1920 x 1080P @ 30FPS
- 120 Degree wide viewing angle
- 2.0" Screen
- Time and date stamp
- G-Sensor function
- Mini USB interface
- Seamless cycle loop recording
- Suction cup car mount
- Built-in MIC and Speaker
- 12V in-car USB charger
- Supports Micro SD cards up to 64GB, card not included
ATTENTION: Please charge the unit for 4 hours before installing. The Dash Cam must be connected to power when in use, battery is for emergency power only.
Product structure
The product has the following components:
- 1) Power button
- 2) Micro SD card slot
- 3) Reset button
- 4) Mini USB connection
- 5) Indicator light
- 6) Screen
- 7) OK button
- 8) Down button
- 9) Up button
- 10) Menu button
- 11) Microphone
- 12) Lens
- 13) Speaker
- 15) Locking nut
- 16) Suction lock
- 17) Suction mount
A visual representation of the product structure is provided, showing the location of each numbered component.
Charging the Dash Cam
The Dash Cam can be charged in two ways:
- Using the provided car charger.
- Using a USB cable to connect to the Mini USB interface.
When charging, a red indicator on the Dash Cam glows red. It takes approximately 2 hours to fully charge. The red indicator turns off when fully charged.
Charging status indicators:
- Critical Power: Battery icon shows empty.
- Low Power: Battery icon shows partially filled.
- Medium Power: Battery icon shows mostly filled.
- Full Power: Battery icon shows completely filled.
Installing the Dash Cam
Follow these steps for installation:
- Ensure the windscreen is clean and free of debris. Attach the suction cup to the windscreen and lock it into position with the lever.
- Position the device where vision is not blocked, preferably close to the rear-view mirror. Avoid installing the device on or near an airbag.
- Insert a Micro SD card into the Dash Cam.
- Connect the Mini USB end of the power cord to the Mini USB interface/charging point of the Dash Cam. Connect the USB charging end of the cable into the USB socket adapter and place the adapter into the vehicle's 12V power socket.
- Adjust the mounting bracket and rotate the camera to get the best view. Ensure approximately 1/4 of the vehicle's bonnet is visible from the bottom of the screen for alignment.
- Turn the vehicle's ignition to ON. The Dash Cam will power on and start recording automatically, indicated by an audible tone.
- A blue LED will start flashing when recording has started. When the blue LED is solid, the Dash Cam is in standby mode.
- The Dash Cam requires power from the charging adapter to function. When power is removed or turned off, the Dash Cam saves the current file and turns off.
Instructions for video operation
Once the power source is connected and ignition is turned on, the red indicator lamp lights up, and recording begins automatically. If the ignition is turned off, the device saves the last file and powers off. To manually power ON/OFF, press the power button underneath. When not recording, press the Power button to switch to video mode. To start and stop recording in video mode, press the OK button. A red circle indicator on the LCD top middle will start flashing. Press the UP arrow to mute the microphone. While recording, press the Power button to lock files (SOS). Do not turn off until recording is finished and the lock icon disappears.
The screen displays the following information during video operation:
- Recording Icon: Indicates recording status.
- Video Resolution: Shows current resolution (e.g., FHD, 30FPS).
- Video Mode: Indicates the current mode.
- SD Card: Shows SD card status.
- Battery Strength: Displays battery level.
- Exposure Compensation: Allows adjustment of exposure.
- Microphone ON: Indicates if the microphone is active.
- Lock Icon: Appears when a file is locked (SOS).
- Date/Time: Displays the current date and time.
- Recording Time: Shows the duration of the current recording.
Instructions for Photo operation
To switch from video mode to photo mode when not recording, press the Power button. The screen will change from a movie icon to a camera icon. To take a picture, press the OK button. The Dash Cam will make a camera sound when a picture is taken. Use the arrow keys to zoom in and out. Pressing the Menu button in photo mode allows adjustment of photo resolution, image quality, and other photo settings.
The screen displays the following information during photo operation:
- Zoom: Indicates zoom level.
- Photo Resolution: Shows the selected photo resolution (e.g., 3M, 2M, 1.2M, VGA).
- Photo Mode: Indicates the current mode.
- Exposure Compensation: Allows adjustment of exposure.
- Date/Time: Displays the current date and time.
- Number of photos remaining: Shows how many photos can still be taken.
Video/Photo playback & protecting files
Press the Power button until the video reel or photo icon appears on the top left of the screen. Use the arrow buttons to navigate through recorded videos or photos. Press the OK button to select a file for playback. The Menu button provides options to adjust volume, delete, or protect files. To lock or protect a file, press the OK button once, select 'protect options', and press OK twice to confirm 'Yes'. Protected files have a lock icon and cannot be deleted until unlocked.
To unlock or unprotect a file, press the Menu button once, press the OK button for the protect sub-menu, select 'unprotect options' using the arrows, and press OK twice to confirm 'Yes'. Press the Power button to exit.
The playback screen shows:
- File name (e.g., F/FILE180128-214704F.MP4)
- Date/Time
- Recording time
- Playback controls (e.g., play/pause, volume)
Movie mode menu settings
- Movie Mode: Two resolutions are available: 1920x1080 30fps or 1280x720 30fps.
- Movie Clip Time (Loop Recording): Set the size of recorded files. The Dash Cam records over the oldest files when the card is full. Files can be recorded in 1, 2, 3, 5, or 10-minute segments. It is recommended to upload important files to your computer.
- Sound Record: Turn the Dash Cam's recording sound on or off. Set to 'off' to stop recording sound in the vehicle's cabin.
General settings
- Beep Sound: Turn button beep sounds on or off.
- Clock Settings: Edit the date and time for use with the Stamp format.
- Date Format: Change the displayed format for year, month, and day.
- Stamp Format: Stamp the date/time and logo (Dash Cam Model Number) on all footage.
- Language: Choose from a selection of languages.
- Flicker: Optimize recording in conditions with street lights and AC lighting. Set to '50hz' for Australian standard frequency.
- LCD Power Save: Turn the LCD off after 1 or 3 minutes, or completely off. Recording continues. Useful for night driving to avoid distraction.
- G Sensor: Activates in case of a car accident by determining gravitational acceleration (1g = 9.8 m/s²). Takes a 3-minute locked video file. Sensitivity can be set from Level 0 (less sensitive) to Level 4 (sensitive). Level 0-1 is recommended to reduce false readings.
- Reset Setup: Reset all settings to factory default.
- Format: Format/delete all files on the Micro SD card. Reinstalls DCIM directory and Dash Cam software for optimal operation.
- FW Version: Displays the firmware/software version of the Dash Cam's hardware.
Still capture menu settings
- Still Image Size: Choose photo resolution: 3M, 2M, 1.2M, or VGA.
- Still Quality: Choose 'Superfine' or 'Fine' for more detailed images.
- Exposure: Adjust the light and dark balance of photos. Recommended setting is '0'.
Connecting to a PC
USB Interface: The car charger powers the Dash Cam via the Mini USB interface. The Mini USB cable can also connect to a computer for data transfer.
When connected to a PC via USB, the Dash Cam screen displays 'MSDC', allowing video and photo transfer. Pressing the OK button reveals a "NO NAME" icon on your PC with three folders:
- EVENT: For locked files.
- NORMAL: For video files.
- PHOTOS: For picture files.
Maintenance
Maintaining the Battery:
To prolong battery life, charge the Dash Cam on a 5-volt home charger for 2-3 hours at least once a week with the unit turned off. If the car is not used daily, or for cars used for less than 1 hour daily, charge the Dash Cam once every 3 weeks for 2-3 hours. It is not recommended to power the Dash Cam solely by its battery, as it only runs for 10-15 minutes. Always use the provided charger. The internal battery is for backing up time/date and saving data.
Formatting Card:
It is advisable to format the Micro SD card weekly, especially if the G-sensor is active, as locked footage can fill the card and stop recording. Formatting the card is prompted each time the Micro SD card is removed and re-inserted. The Dash Cam will not record until formatted.
Resetting Dash Cam:
Insert a fine-point paper clip into the reset hole on the side of the unit.
Product specifications
| Specification | Details |
|---|---|
| MCU | MSTAR MSC8328 |
| Display | 2.0-inch LCD screen |
| Screen resolution | 960*240 pixels |
| Color | Black |
| Video | MP4 |
| Video resolution | 1080 FHD 1920*1080 at 30fps, 720 HD 1280*720 at 30fps |
| Picture | 3M/ 2M/ 1.2M/ VGA |
| Picture format | JPG |
| Viewing angle | 120 degree wide viewing angle |
| Camera sensor | GC2023 (1080P) |
| Functions | G-Sensor, Loop recording |
| OSD Language | English, Russian, Chinese, etc |
| Audio | Built-in Microphone and speaker |
| Storage | Micro SD card 8-64GB Max Class10 |
| Input / Output | 5V 1.5A / Mini/USB 2.0 |
| Battery | 180mAh lithium battery |
| Dimension | W55 x H51 x D35 mm |
| Accessories | Car mount, Car charger, User Manual |
Warranty
This product is guaranteed against defects for a period of 12 months from the date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie Rd, Lawnton, QLD 4501. Phone: (07) 3482 7500.
Supercheap Auto offers repair, replacement, or store credit for defective products during the warranty period. To claim, bring the product to the Front Service Desk of your nearest Supercheap Auto store. For store locations, visit www.supercheapauto.com.au (AUS) or www.supercheapauto.co.nz (NZ). A receipt or proof of purchase is required. Additional information may be requested to process your claim, such as identification showing your name, address, and signature if proof of purchase is unavailable.
The product may be sent to the manufacturer for defect assessment. This warranty does not cover faults or defects caused by product modification, misuse, abuse, normal wear and tear, or failure to follow user instructions.
The product comes with guarantees that cannot be excluded under the Australian Consumer Law. Consumers are entitled to a replacement or refund for a major failure and compensation for other reasonably foreseeable loss or damage. Goods are also entitled to be repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Any expenses incurred relating to the return of the product to the store are normally the customer's responsibility. For more information, contact your nearest Supercheap Auto store. The benefits provided by this warranty are in addition to other rights and remedies under the Australian Consumer Law.
Manufactured and packaged for SRGS PTY LTD ABN 23 113 230 050, 751 Gympie Road, Lawnton, Queensland 4501, Australia.
Supercheap Auto New Zealand | Buy Auto Spares and Parts Online
Supercheap Auto Australia | Online Auto & Car Parts Store
