Redmi Note 14 Pro Quick Start Guide
Brand: Xiaomi
Getting Started
Thank you for choosing Redmi. To turn on your device, press and hold the power button. Follow the on-screen instructions to configure your device.
For additional information, please visit the official website: www.mi.com/global/service/userguide
SIM Card Information
Please do not insert non-standard SIM cards into the SIM card slot, as they may damage the SIM card slot.
Warning: Do not disassemble this device.
Device Overview
The Redmi Note 14 Pro features a smartphone design with a display, earpiece, and front camera on the front. Side buttons include volume controls and a power button. The device supports dual SIM functionality and expandable storage via a Micro SD card. It has dedicated slots for Nano-SIM cards and a combined slot for a Micro SD card or a second Nano-SIM card.
Diagram elements:
- Smartphone outline
- Volume Up button
- Volume Down button
- Power button
- SIM Tray Slot (labeled Nano-SIM)
- Micro SD / Nano-SIM Slot
Safety and Compliance Information
WEEE (Waste Electrical and Electronic Equipment)
Caution: Special precautions must be taken for the safe disposal of this product. This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent harm to the environment or human health from uncontrolled waste disposal and to promote the sustainable reuse of material resources, please recycle responsibly. For the safe recycling of your device, please use return and collection systems or contact the retailer where the device was originally purchased.
Battery Safety
Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to instructions.
- To prevent possible hearing damage, do not listen at high volume levels for extended periods.
- Using unauthorized cables, power adapters, or batteries may cause fire, explosion, electric shock, other hazards, or damage to the device.
- The operating temperature range for this device is 0°C to 40°C. Using this device outside this range may cause damage.
- If your device has a built-in battery, do not attempt to replace it yourself.
- Charge this device only with the included or authorized cable and power adapter. Use only authorized accessories.
- Unplug the adapter from both the device and the power outlet after charging is complete.
- Do not charge the device for more than 12 hours.
- The battery must be recycled or disposed of separately from household waste. Improper battery use may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to local regulations.
- Do not disassemble, strike, puncture, or incinerate the battery. If the battery is deformed or damaged, stop using it immediately.
- Do not short-circuit the battery, as this may cause overheating, burns, or other injuries.
- Do not place the battery in a high-temperature environment; overheating may cause an explosion.
- Do not disassemble, strike, or puncture the battery, as this may cause it to leak, overheat, or explode.
- Do not incinerate the battery, as this may cause fire or explosion.
- Battery removal or repair should only be performed by a manufacturer-authorized repair center.
General Safety
- Keep the device dry.
- Do not attempt to repair the device yourself. Contact Mi Customer Support or an authorized repair center if any part is not functioning properly.
- Connect other devices according to their instructions. Do not connect incompatible devices.
- For AC/DC adapters, the outlet must be installed near the device and be easily accessible.
Software Updates
Please update your phone's operating system using the built-in firmware update function or visit an authorized service center. Updates through other means may damage the device or cause data loss, security issues, and other risks.
Disclaimer
This user manual is published by Xiaomi or its local affiliate. Xiaomi may make improvements and changes to this manual at any time without notice. All illustrations are for illustrative purposes only and may not accurately reflect the actual device.
Xiaomi Warranty Notice
This warranty provides specific legal rights, and you may have other rights that vary by jurisdiction. Xiaomi does not exclude, limit, or suspend other rights you may have, except as permitted by law. Consult your local laws for full understanding of your rights. This contractual warranty applies only to the hardware components of the Xiaomi product as originally supplied and does not cover software or third-party equipment.
Regulatory Compliance
EU Regulations
Declaration of Conformity: Xiaomi Communications Co., Ltd. declares that this mobile phone complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: www.mi.com/en/certification
RF Exposure Information (SAR) - EU
This device complies with Specific Absorption Rate (SAR) limits for the general population/uncontrolled exposure (localized 10-gram SAR for head and trunk, limit: 2.0 W/kg) as recommended by Council Recommendation 1999/519/EC, ICNIRP guidelines, and RED (Directive 2014/53/EU). During SAR testing, the device transmitted at its highest certified power level and was placed in positions simulating RF exposure against the head without separation and close to the body with 5 mm separation. Body-worn SAR compliance is based on a 5 mm separation distance. Always maintain at least 5 mm separation from the body. Use belt clips or holsters without metal components for body-worn operation. Avoid accessories containing metal.
SAR Values: Head: 0.80 W/kg, Body: 0.98 W/kg (5 mm distance).
EU Restrictions: Operation in the 5250 to 5350 MHz frequency band is restricted to indoor use in AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), UK, IS, LI, NO, CH, TR.
2.4 GHz Band Restrictions: Norway: This subparagraph does not apply to the geographical area within a radius of 20 km from the centre of Ny-Ålesund.
FCC Regulations
This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this device causes harmful interference to radio or television reception, try to correct it by: reorienting/relocating the antenna, increasing separation between equipment and receiver, or connecting the device to a different outlet.
RF Exposure Information (SAR) - FCC
The SAR limit set by the FCC is 1.6 W/kg. For body-worn operation, this device has been tested and meets FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device at least 1.5 cm from the body. Avoid accessories containing metal for body-worn operation. Always maintain at least 1.5 cm separation from the body.
Electronic Label
Access certification information via Settings > About phone > Certification, or search for 'Certification' in Settings.
Factory Reset Instructions
Path: Settings > About phone > Factory reset. This erases local data including accounts, contacts, photos, videos, apps, backups, and SD card data.
Charging
Connect the 'Redmi Note 14 Pro' to a computer using a USB data cable, or use the included USB cable with a Mi brand charger and plug it into a power strip.
The product supports a maximum charger power of 45 W. Maximum voltage: 11V, Maximum current: 4.1A.
Charging Compatibility: You can also use third-party chargers that comply with USB2.0 or higher standards and meet safety requirements (IEC 60950, IEC 62368-1) and local regulations. Using non-compliant chargers may damage the product and compromise safety.
The charger should supply between 10W and 45W for optimal charging speed (USB PD fast charging).