Redmi Note 14 Pro

Quick Start Guide

[Xiaomi logo]

Getting Started

Thank you for choosing the Redmi Note 14 Pro.

Turn on the device by pressing and holding the power button. Follow the on-screen instructions to configure the device.

For more information, visit our official website: www.mi.com/global/service/userguide

Device Overview

The device features:

Volume buttons
Power button
USB Type-C port
SIM/MicroSD tray
SIM tray

SIM Card

Do not insert any non-standard SIM cards into the SIM card slot. They may damage the SIM card slot.

WARNING: Do not disassemble this device.

WEEE (Waste Electrical and Electronic Equipment)

For safe disposal of this product, special precautions must be taken. This symbol [WEEE symbol] means that this product must not be disposed of with normal household waste within the EU. Hand in the product for recycling to prevent environmental or health damage from improper waste disposal and to support the sustainable reuse of materials. To recycle your device safely, use collection points or contact the retailer where you originally purchased the device.

Battery and Safety Warnings

CAUTION: Replacing the battery with an incorrect type may result in an explosion hazard. Dispose of used batteries according to the instructions.

Do not use high volume for extended periods to prevent hearing damage.

For more safety information and precautions, visit: www.mi.com/en/certification

Important Safety Information

Using unapproved cables, power adapters, or batteries may cause explosion, fire, electric shock, or other risks or damage to the device.
The operating temperature range for this device is 0°C to 40°C. Using the device in environments outside this range may damage the device.
If your device has a built-in battery, do not attempt to replace the battery yourself, as this may damage the battery or device.
Charge this device only with the provided or approved cable and power adapter. Use only approved accessories that are compatible with the device.
After charging is complete, disconnect the adapter from the device and unplug it from the electrical outlet. Do not charge the device for more than 12 hours.
The battery must be recycled or disposed of separately from household waste. Improper handling of the battery may cause fire or explosion. Dispose of the device, its battery, and accessories in accordance with local regulations.
Do not disassemble, deform, puncture, incinerate, or short-circuit the battery. If the battery appears deformed or damaged, stop using it immediately.
Do not expose the battery to high temperatures. Overheating may cause an explosion.
Do not disassemble, deform, or puncture the battery, as this may cause battery leakage, overheating, or explosion.
Do not incinerate the battery, as this may cause fire or explosion.
The user cannot remove or modify the battery. Battery removal or repair can only be performed by an authorized service center of the manufacturer.
Keep the device dry.
Do not attempt to repair the device yourself. If any part of the device is not working properly, contact Mi customer support or take the device to an authorized service center.
Connect other devices according to their respective user manuals. Do not connect incompatible devices to this device.
When using AC/DC adapters, the socket must be located near the device and must be easily accessible.

Safety Precautions

Follow all applicable laws and regulations that restrict the use of mobile phones in certain situations and environments.
Do not use your phone at gas stations or in any explosive atmosphere or potentially explosive atmosphere, including areas designated for fueling, ship decks, fuel transport or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powder. Follow all signs indicating to turn off wireless devices such as mobile phones or other radio devices.
Turn off your mobile phone or wireless device in areas where controlled detonation is used, or in areas where "two-way radio" or "electronic devices" are required to be turned off to prevent potential hazards.
Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always follow all hospital and medical center rules and regulations. If you have a medical device, consult your doctor and the device manufacturer to ensure your phone will not interfere with the device's function.
Always maintain a minimum distance of 15 cm between your mobile phone and a pacemaker to prevent potential pacemaker interference. For this reason, hold the phone to the ear on the opposite side from where the pacemaker is implanted when making a call, and do not carry the phone in your breast pocket. To prevent interference with medical devices, do not use the phone near hearing aids, cochlear implants, and similar devices.
Follow all aircraft safety regulations and turn off your phone on board the aircraft if required.
When driving, use your phone in accordance with applicable traffic laws and regulations.
If you are outdoors during a thunderstorm, do not use your phone to avoid lightning strikes.
Do not use your phone for calls while charging.
Do not use the phone in places with high humidity, such as bathrooms. This could cause electric shock, injury, fire, or damage to the charger.

Charging

To charge:

Connect the Redmi Note 14 Pro to a computer using a USB data cable.
Use the USB cable included in the gift box with a Mi charger, and connect it to an extension cord.

Please note that the product supports charging with a maximum power of 45W.

Charging Compatibility

You can also use any other brand charger that complies with the USB 2.0 or higher standard and also meets the requirements of international safety standards for information technology equipment (IEC 60950), audio/video, information and communication technology equipment (IEC 62368-1) and your country's or region's applicable laws and regulations. Using other chargers that do not meet the above requirements for charging this product may damage the product itself and your personal or property safety.

Charger power must be at least [10] watts required by the radio device and at most [45] watts to achieve maximum charging speed. USB PD fast charging.

Safety Declaration

Update your phone's operating system using the built-in software update function or visit one of our authorized service centers. Updating the software by other means may cause device damage or data loss, security issues, and other hazards.

EU Regulations

EU Declaration of Conformity (RED)

Xiaomi Communications Co., Ltd. hereby declares that this digital mobile phone GSM/GPRS/EDGE/UMTS/LTE with Bluetooth and Wi-Fi functions 24116RACCG complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.mi.com/en/certification

RF Exposure (SAR) Information

This device complies with Specific Absorption Rate (SAR) limits for the general population/uncontrolled exposure (localized SAR value per 10 grams for head and trunk, limit: 2.0 W/kg) as defined in Council Recommendation 1999/519/EC, ICNIRP guidelines, and the Radio Equipment Directive (RED, Directive 2014/53/EU).

During SAR level testing, this device was set to transmit at its highest certified power level in all tested frequency bands and was placed in positions that simulate RF exposure during use immediately next to the head and at a distance of 5 mm from the body.

Compliance with SAR limits when using the device on the body is based on a distance of 5 mm between the device and the human body. You should wear this device at a minimum distance of 5 mm from your body to ensure the RF exposure level is in accordance with the stated level or lower. If you wear the device close to your body, you should use cases or belt clips that do not contain metal parts and allow the device to be kept at least 5 mm from the human body. RF exposure has not been tested or certified with body-worn accessories containing metal, so you should avoid using such accessories.

Certification Information (Highest SAR Level)

SAR Limit 10g: 2.0 W/kg.

SAR value: head: 0.80 W/kg, body: 0.98 W/kg (5mm distance).

Legal Information

This device may be used in all EU member states.

Follow national and local regulations applicable at the place of device use.

This device is intended for indoor use when operating in the 5250 to 5350 MHz frequency range in: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards, and other features approved in IEEE Standard 802.11 specifications) may vary depending on regional availability and local network support. The feature may be added through automatic updates (OTA) if available.

2.4 GHz band restrictions: Norway: This subsection does not apply to the geographical area within 20 km of the center of the Ny-Ålesund base station.

Ensure that charging adapters comply with country, international, and regional safety standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands and maximum radio transmission power only within the EU:

GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
WCDMA Band 1/8: 25.7 dBm
LTE Band 1/3/7/8/20/28/38/40/41: 25.7 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250 MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
NFC: 13.56 MHz < 42 dBuA/m at a distance of 10 m

FCC Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

This mobile phone has been tested and meets the limits for a Class B digital device in accordance with Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential area.

This device generates, uses, and may emit radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that such interference will not occur under certain installation conditions. If this device causes harmful interference to radio or television reception, which can be determined by turning the device off and on, the user should try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.
Increase the distance between the device and the receiver.
Connect the device to a different electrical circuit than the receiver.
Seek help from the dealer or an experienced radio/television technician.

RF Exposure (SAR) Information (FCC)

This device complies with government regulations regarding radio wave exposure. This device has been designed and manufactured not to exceed the emission limits for radio frequency (RF) energy exposure. The exposure standards for wireless devices use a unit of measurement known as Specific Absorption Rate (SAR).

The SAR limit defined by the FCC is 1.6 W/kg. This device has been tested for near-body use and complies with FCC RF exposure guidelines when used with non-metal accessories and placed at least 1.5 cm from the body. Compliance with RF exposure limits has not been tested with body-worn accessories containing metal, so you should avoid using such accessories. Any accessory used with this device that is intended for body-worn use must maintain the device at a distance of at least 1.5 cm from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment.

Shielded cables must be used with this equipment to ensure compliance with FCC Class B limits.

Electronic Label

This device has an electronic label with certification information. You can find it in Settings > About phone > Certification, or by opening Settings and entering 'Certification' in the search field.

Model Information

Model: 24116RACCG

2411 indicates that this product will be launched after November 2024.

Disclaimer

This quick start guide is published by Xiaomi or its local affiliate. Xiaomi may make improvements and changes to this guide without prior notice due to typographical errors, inaccuracies in current information, or improvements to programs and/or equipment. However, such changes will be included in new online editions of this quick start guide (details can be found at www.mi.com/global/service/userguide). All illustrations are for representation purposes only and may not accurately depict the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer's Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Email: contact@support.mi.com

Brand: Redmi