Redmi Note 11 Pro Quick Start Guide

Getting Started

Welcome to the Redmi Note 11 Pro. To turn on your device, long press the power button. Follow the on-screen instructions to configure the device. For more detailed information, visit the official website at www.mi.com/global/service/userguide.

MIUI

The Redmi Note 11 Pro comes pre-installed with MIUI, Xiaomi's customized Android-based operating system. MIUI offers frequent updates and user-friendly features, developed based on feedback from over 200 million active users worldwide. For more information, please visit en.miui.com.

Device Overview

The phone features a display showing the time and date. On the right side of the device are the Volume Buttons and the Power Button. At the bottom is the USB Type-C Port.

SIM Card and Dual SIM

SIM Card Tray

The SIM card tray supports two Nano-SIM cards and one Micro SD card.

About Dual SIM

• Dual 4G SIM is offered by select telecom operators and may not be available in all regions.
• The device supports dual nano-SIM cards. When using both SIM card slots, either card can be set as the primary card.
• VoLTE is only supported by telecom operators in certain regions.
• The system may be automatically updated for optimal network performance. For details, please refer to the system version in use on the device.
• Please do not insert non-standard SIM cards into the SIM card slot, as they may damage the SIM card slot.
• WARNING: Do not disassemble this device.

Safety and Disposal

WEEE Disposal

Special precautions must be taken to safely dispose of this product. The WEEE (Waste Electrical and Electronic Equipment) marking indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, use return and collection systems or contact the retailer where the device was originally purchased. For the Environmental Declaration, please refer to www.mi.com/en/about/environment.

CAUTION

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at www.mi.com/en/certification.

Important Safety Information

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. Use only authorized accessories compatible with your device.
• This device's operating temperature range is 0°C to 40°C. Using it outside this range may damage the device.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damaging the battery or the device.
• Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage.
• After charging, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
• Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short circuit the battery, as this may cause overheating, burns, or other injury.
• Do not place the battery in a high-temperature environment; overheating may cause explosion.
• Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
• Do not burn the battery, as this may cause fire or explosion.
• If the battery appears deformed or damaged, stop using it immediately.
• The user shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
• Keep your device dry.
• Do not attempt to repair the device yourself. If any part does not work properly, contact Mi customer support or bring it to an authorized repair center.
• Connect other devices according to their instruction manuals. Do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet shall be installed near the equipment and be easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting mobile phone use in specific situations and environments.
• Do not use your phone at petrol stations or in any explosive atmosphere, including fueling areas, below decks on boats, fuel or chemical transfer/storage facilities, or areas where the air may contain chemicals or particles like grain, dust, or metal powders. Obey signs to turn off wireless devices. Turn off your phone or wireless device when in a blasting area or areas requiring "two-way radios" or "electronic devices" to be turned off to prevent potential hazards.
• Do not use your phone in hospital operating rooms, emergency rooms, or intensive care units. Always comply with hospital rules and regulations. If you have a medical device, consult your doctor and the device manufacturer to determine if your phone may interfere with its operation. To avoid potential interference with a pacemaker, maintain a minimum distance of 15 cm between your phone and the pacemaker. Use the ear opposite your pacemaker and do not carry the phone in a breast pocket. To avoid interference with medical equipment, do not use your phone near hearing aids, cochlear implants, or similar devices.
• Observe all aircraft safety regulations and turn off your phone on board aircraft when required.
• When driving, use your phone in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
• Do not use your phone to make calls while it is charging.
• Do not use your phone in places with high humidity, such as bathrooms, as this may result in electric shock, injury, fire, and charger damage.

Regulatory Information

Security Statement

Please update your phone's operating system using the built-in software update feature, or visit an authorized service outlet. Updating through other means may damage the device or result in data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity

[CE Marking] Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE Digital Mobile Phone with Bluetooth and Wi-Fi 2201116TG complies with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at www.mi.com/en/certification.

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, the device transmitted at its highest certified power level in all tested frequency bands and was placed in positions simulating RF exposure during use against the head (no separation) and near the body (5 mm separation).

SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. The device should be carried at least 5 mm away from the body to ensure RF exposure levels are compliant. When attaching the device near the body, use a belt clip or holster that does not contain metallic components and maintains at least 5 mm separation. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR)

SAR 10 g limit: 2.0 W/Kg. SAR Value: Head: X.XXX W/Kg, Body: Y.YYY W/Kg (5 mm distance).

Legal Information

This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

Restrictions in the 2.4 GHz band: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Ensure the power adapter used meets the requirements of Clause 6.4.5 in IEC/EN 62368-1 and has been tested and approved according to national or local standards.

Frequency Bands and Power (EU)

This mobile phone offers the following frequency bands in EU areas and maximum radio-frequency power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA band 1/8: 25.7 dBm
• LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10m

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This device meets government requirements for exposure to radio waves. It is designed and manufactured not to exceed emission limits for radio frequency (RF) energy. The exposure standard for wireless devices uses Specific Absorption Rate (SAR).

The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.5 cm from the body. RF exposure compliance with any body-worn accessory containing metal was not tested or certified, and use of such an accessory should be avoided. Any accessory used for body-worn operation must keep the device a minimum of 1.5 cm away from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

E-label

This device has an electronic label for certification information. To access it, go to Settings > About phone > Certification, or open Settings and type "Certification" into the search bar.

Product Details

Model: 2201116TG. The '2201' indicates this product was launched after January 2022.

Disclaimer

This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes necessitated by typographical errors, inaccuracies, or program/equipment enhancements may be made by Xiaomi at any time without notice. These changes will be incorporated into new online editions of the quick start guide (details at www.mi.com/global/service/userguide). All illustrations are for purposes only and may not accurately depict the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: Redmi

Model: 2201116TG

© Xiaomi Inc. All rights reserved.