Redmi Note 14 Pro

Getting Started

Thank you for choosing the Redmi Note 14 Pro. To power on the device, press and hold the power button. Follow the on-screen instructions to set up your device.

For more detailed information, please visit our official website: www.mi.com/global/service/userguide

SIM Card Information

Do not insert non-standard SIM cards into the SIM card slot, as they may damage the SIM card slot.

WARNING: Do not disassemble the device.

Electrical and Electronic Equipment Waste

This symbol ♻️ indicates that this product should not be disposed of with other household waste within the EU. To prevent harm to the environment or human health from improper waste disposal and to promote the sustainable reuse of material resources, please dispose of the product responsibly.

For safe recycling, contact your local electronics collection point or the retailer where the device was originally purchased.

Important Safety Information

WARNING: Use of an incorrect battery type may result in an explosion. Dispose of used batteries according to instructions.

To prevent hearing damage, do not listen at high volumes for extended periods.

For additional safety information and precautions, visit: www.mi.com/en/certification

General Precautions:

• Read all safety precautions before using the device.
• Using unauthorized cables, power adapters, or batteries may cause fire, explosion, electric shock, or other hazards, or damage to the device.
• The equipment is intended for use in enclosed, heated rooms with ambient temperatures between 0°C and 40°C and relative humidity not exceeding 95%.
• Do not attempt to replace the battery yourself.
• Charge the device only with the supplied or approved cable and power adapter. Use only approved accessories compatible with your device.
• Disconnect the adapter after charging is complete. Do not charge for more than 12 hours.
• Batteries must be disposed of or recycled separately from household waste. Improper handling of batteries can lead to fire or explosion.
• Dispose of or recycle the device, its battery, and accessories in accordance with local regulations.
• Do not disassemble, crush, puncture, or incinerate the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short-circuit the battery, as this may cause overheating, burns, or other injuries.
• Do not expose the battery to high temperatures. Overheating may cause an explosion.
• Do not disassemble, crush, or puncture the battery, as this may cause electrolyte leakage, overheating, or explosion.
• Do not incinerate the battery, as this may cause fire or explosion.
• Users should not remove or replace the battery. Battery removal or repair should only be performed by an authorized service center.
• Keep your device dry.
• Do not attempt to repair the device yourself. Contact Xiaomi customer support or an authorized service center if any component malfunctions.
• Connect other devices according to their operating instructions. Do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet should be near the equipment and easily accessible.

Precautions in Specific Environments

• Observe all applicable laws and regulations that restrict mobile phone use in certain situations and locations.
• Do not use the phone at refueling stations, in potentially explosive atmospheres (e.g., fuel-filling areas, below deck on ships, fuel or chemical storage areas, or areas where the air contains chemicals, fine particles, dust, or metal powders). Observe all signs prohibiting wireless devices. Turn off your smartphone or wireless device in areas where blasting operations are in progress or where signs instruct to turn off radio or electronic devices to avoid interference.
• Do not use the phone in operating rooms, emergency rooms, or intensive care units of hospitals. Always follow hospital rules and regulations. If you use a personal medical device, consult your doctor and the device manufacturer to ensure your phone does not interfere with its operation. Maintain at least 15 cm distance between your phone and pacemaker to avoid potential interference. Use the phone on the ear opposite the pacemaker and do not carry it in a breast pocket. To avoid interference with medical equipment, do not use the phone near hearing aids, cochlear implants, or similar devices.
• Observe all aircraft safety regulations and turn off your phone if required.
• Use your phone while driving in accordance with traffic laws and regulations.
• To avoid lightning strikes, do not use the phone outdoors during thunderstorms.
• Do not use the phone for calls while it is charging.
• Do not use the phone in high-humidity areas like bathrooms, as this may lead to electric shock, injury, fire, or damage to the charger.

Safety Statement

Update your phone's operating system using the built-in software update function or by visiting authorized service centers. Updating software through other methods may damage the device, cause data loss, or create security issues.

EU Regulations

Declaration of Conformity (RED)

Xiaomi Communications Co., Ltd. hereby declares that this digital mobile phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification

Radio Frequency Exposure Information (SAR)

This device complies with the EU Council Recommendation 1999/519/EC, ICNIRP guidelines, and Directive 2014/53/EU (RED) regarding limits for public exposure to radiofrequency electromagnetic fields (Specific Absorption Rate - SAR). The SAR limit for head and body is 2.0 W/kg averaged over 10 grams of tissue.

During SAR testing, the device transmitted at its highest certified power level across all tested frequency bands and was placed in positions simulating radio frequency exposure in close proximity to the head and 5 mm from the body.

The SAR values are based on measurements taken at a 5 mm distance from the body. To ensure compliance with radio frequency exposure levels, keep the device at least 5 mm away from your body. When carrying the device close to your body, use belt clips or cases without metal parts that maintain a minimum 5 mm distance. Accessories containing metal parts have not been tested or certified for compliance with radio frequency exposure and are not recommended.

SAR Certification Information (Peak SAR Values)

• SAR limit for 10g: 2.0 W/kg.
• Head SAR: 0.80 W/kg, Body SAR: 0.98 W/kg (at 5 mm distance).

FCC Regulations

This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Information (SAR)

This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR).

The FCC has established a SAR limit of 1.6 W/kg. This device has been tested for body-worn operation and complies with FCC RF exposure guidelines when used with an accessory that does not contain metal and is positioned at a minimum distance of 1.5 cm from the body. Compliance with RF exposure for body-worn accessories containing metal has not been tested or certified and should be avoided. Any accessory used with this phone in close proximity to the body must be at least 1.5 cm from the body.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this equipment to ensure compliance with Class B limits of the Federal Communications Commission.

Electronic Label

This device has an electronic label with certification information. To view it, go to Settings > About phone > Certification, or select Settings and type "Certification" in the search bar.

Model: 24116RACCG

The marking "2411" indicates that the product will be released to the market after November 2024.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, 100085, China.

Brand: Redmi

© Xiaomi Inc. All rights reserved.

Technical Specifications

Frequency Bands and Power

This mobile phone supports the following frequency bands and maximum radio frequency power in EU countries:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA 1/8: 25.7 dBm
• LTE 1/3/7/8/20/28/38/40/41: 25.7 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz: 20 dBm
• Wi-Fi 5 GHz: 5150–5250 MHz: 23 dBm, 5250–5350 MHz: 20 dBm, 5470–5725 MHz: 20 dBm, 5725–5850 MHz: 14 dBm
• NFC: 13.56 MHz < 42 dBuA/m at 10 meters

Usage, Storage, and Disposal

Usage Purpose

This terminal device is intended for connection to operator networks supporting 2G, 3G, and 4G standards for voice and data transmission, with support for various connection profiles (Wi-Fi, Bluetooth, etc.).

Power

Power adapter: Rated voltage: 11V 4.1A. Battery: 5500 mAh (typical), 5350 mAh (minimum).

Country of Origin

China

Storage Conditions

Store in a dry, enclosed space in its original packaging, at ambient temperatures from -20°C to 45°C and relative humidity not exceeding 70%. Shelf life: 3 years. Maximum stacking height: 10 units.

Disposal

At the end of its service life, contact an official dealer for disposal.