Yaheetech 614082 Desk Assembly Instructions
This document provides detailed instructions for assembling the Yaheetech 614082 desk. Please read all instructions carefully before beginning assembly.
Important Information & Safety
Assembly Requirements:
- Recommended: 1 or more people for assembly. ???
- Estimated assembly time: 1 hour. ⏱️
- This product is not intended for use by children. ?
- Keep away from fire or other heat sources. ?
- We recommend wearing protective gloves. ?
Assembly Advice:
Please follow the instruction manuals and use a pad to avoid damage during assembly. Ensure the assembly area is clear and protected.
Diagram Description (Page 3): A person is shown opening a cardboard box labeled "CARTON". A second diagram illustrates placing a protective pad on the floor before assembling the desk, with a checkmark indicating this is the correct procedure.
Parts List
Main Components:
- Part 1: Desk Top (x1)
- Part 2: Side Panel (x1)
- Part 3: Top Shelf Panel (x1)
- Part 4: Base Panel (x1)
- Part 5: Drawer Runner (x1)
- Part 6: Back Panel (x1)
- Part 7: Drawer Support (x1)
- Part 8: Support Beam (x1)
- Part 9: Drawer Runner (x2)
- Part 10: Drawer Runner (x2)
- Part 11: Top Shelf Panel (x1)
- Part 12: Drawer Base (x2)
- Part 13: Drawer Side (x2)
- Part 14: Drawer Side (x2)
- Part 15: Drawer Front (x2)
- Part 16: Frame Piece (x2)
- Part 17: Frame Piece (x2)
- Part 18: Drawer Divider (x4)
- Part 19: Frame Piece (x2)
- Part 20: Base Panel (x2)
- Part 21: Shelf Divider (x1)
- Part 22: Shelf Divider (x1)
- Part 23: Shelf Divider (x4)
Hardware & Accessories:
- A: Screw (x20)
- B: Cam Lock (x20)
- C: Dowel (x46)
- D: Screw (x4)
- E: Screw (x16)
- F: Handle (x4)
- G: Screw (x32)
- H: Screw (x6)
- I: Screw (x4)
- J: Screw (x6)
- K: Cam Lock (x6)
- L: Allen Key (x1)
- M: Screwdriver (x1)
Note: Extra accessories are included. Please use them if original accessories are missing or damaged.
Assembly Steps
Step 1: Attach Drawer Runners to Desk Top
Attach parts 2 and 4 to the underside of part 1 using screws A.
Parts used: 1 (x1), 2 (x1), 4 (x1), A (x20)
Diagram Description: Part 1 (desk top) is laid flat. Parts 2 and 4 are positioned on its underside and secured with screws A. A close-up shows screw A being inserted into part 2.
Step 2: Attach Drawer Runners to Side Panels
Attach parts 9 and 10 to parts 1 and 2 using screws E and hardware I.
Parts used: 9 (x1), 10 (x1), 1 (x1), 2 (x1), E (x4), I (x2)
Diagram Description: Parts 9 and 10 are attached to the side panels (parts 1 and 2) using screws E and hardware I. The diagram shows the assembly of two drawer runner sets, indicated by "x2".
Step 3: Assemble Drawer Frames
Assemble frame pieces 16, 17, and 19 using screws G.
Parts used: 16 (x1), 17 (x1), 19 (x1), G (x4)
Diagram Description: Parts 16 and 17 are joined to form a U-shape, secured by screws G. Part 19 is attached to the top of this frame. This assembly is repeated twice (x2).
Step 4: Attach Drawer Bases
Attach drawer bases (part 12) to the assembled frames using screws G.
Parts used: 12 (x1), G (x4)
Diagram Description: Part 12 (drawer base) is placed into the frame from Step 3 and secured with screws G. This is repeated twice (x2).
Step 5: Attach Drawer Sides and Handles
Attach drawer sides (part 14) to the drawer base and frame using screws E and G. Attach handles (part F) to drawer fronts (part 14) using screws E.
Parts used: 14 (x1), E (x2), G (x4), F (x1), E (x2)
Diagram Description: Drawer sides (part 14) are attached to the drawer assembly. Handles (part F) are attached to the drawer fronts (part 14) using screws E. This step is repeated twice (x2).
Step 6: Assemble Drawer Dividers
Attach drawer dividers (part 18) to base panel (part 20) using screws G.
Parts used: 18 (x2), 20 (x1), G (x4)
Diagram Description: Two drawer dividers (part 18) are attached to a base panel (part 20) using screws G. This assembly is repeated twice (x2).
Step 7: Secure Drawer Bottoms
Place drawer bottoms (part 13) into the frames and secure with screws G.
Parts used: 13 (x1), G (x4)
Diagram Description: Part 13 (drawer bottom) is inserted into the drawer frame and secured with screws G. This is repeated twice (x2).
Step 8: Attach Drawer Fronts and Handles
Attach drawer fronts (part 15) to the drawer sides (part 13) using screws E and G. Attach handles (part F) to drawer fronts (part 15) using screws E.
Parts used: 15 (x1), 13 (x1), E (x2), G (x4), F (x1), E (x2)
Diagram Description: Drawer fronts (part 15) are attached to the drawer sides (part 13). Handles (part F) are attached to the drawer fronts (part 15) using screws E. This step is repeated twice (x2).
Step 9: Assemble Shelf Unit Structure
Attach shelf dividers (parts 21, 22, 23) to side panel (part 2) using dowels C.
Parts used: 2 (x1), 21 (x1), 22 (x1), 23 (x4), C (x12)
Diagram Description: Part 2 (side panel) is laid flat. Shelf dividers (parts 21, 22, 23) are inserted vertically into pre-drilled holes, secured by dowels C.
Step 10: Secure Shelf Unit with Cam Locks
Insert cam locks (part B) into the shelf dividers and tighten.
Parts used: B (x6)
Diagram Description: Cam locks (part B) are inserted into holes on the shelf dividers and turned to secure the structure.
Step 11: Attach Top Shelf Panel
Place top shelf panel (part 11) onto the assembled shelf unit and secure.
Parts used: 11 (x1)
Diagram Description: Part 11 (top shelf panel) is placed on top of the assembled shelf unit and attached.
Step 12: Attach Top Shelf Unit to Desk Top
Insert dowels C into the shelf unit and attach desk top (part 3).
Parts used: 3 (x1), C (x12)
Diagram Description: Dowels C are inserted into the top of the shelf unit. Part 3 (desk top) is then placed onto the shelf unit, aligning with the dowels.
Step 13: Secure Desk Top
Secure part 3 to the shelf unit using screws H.
Parts used: H (x6)
Diagram Description: Screws H are used to fasten the desk top (part 3) to the underlying shelf unit structure.
Step 14: Assemble Drawer Runner Supports
Attach drawer runners (parts 9, 10) to base panel (part 4) using dowels C and screws H.
Parts used: 4 (x1), 9 (x1), 10 (x1), C (x2), H (x4)
Diagram Description: Part 4 (base panel) is laid flat. Drawer runners (parts 9 and 10) are attached to it using dowels C and screws H.
Step 15: Secure Drawer Runners with Cam Locks
Use cam locks (part B) to secure the drawer runners. Use accessory screwdriver (M).
Parts used: B (x4), M (x1)
Diagram Description: Cam locks (part B) are inserted into the desk leg structure and turned to secure the drawer runners. The accessory screwdriver M is shown being used.
Step 16: Attach Frame Pieces
Attach frame pieces using screws K.
Parts used: 5 (x1), K (x4)
Diagram Description: Part 5 (a long panel) is attached to the desk frame using screws K.
Step 17: Secure Drawer Runners with Cam Locks (Second Side)
Use cam locks (part B) to secure the drawer runners on the other side. Use accessory screwdriver (M).
Parts used: B (x4), M (x1)
Diagram Description: Similar to Step 15, cam locks (part B) secure the drawer runners on the opposite side of the desk legs, using the accessory screwdriver M.
Step 18: Attach Back Panel and Support Beam
Attach back panel (part 6) and support beam (part 8) using dowels C.
Parts used: 6 (x1), 8 (x1), C (x3)
Diagram Description: Part 6 (back panel) is attached to the desk frame using dowels C. Part 8 (support beam) is also attached.
Step 19: Attach Desk Top to Frame
Attach desk top (part 1) to the frame using screws J and cam locks K.
Parts used: 1 (x1), J (x3), K (x3)
Diagram Description: The desk top (part 1) is placed onto the assembled frame. Screws J and cam locks K are used to secure it.
Step 20: Attach Drawer Supports
Attach drawer supports (part 7) to the desk frame using dowels C.
Parts used: 7 (x1), C (x3)
Diagram Description: Part 7 (drawer support) is attached to the desk frame using dowels C.
Step 21: Final Frame Securing
Secure the desk frame using screws J and cam locks K.
Parts used: J (x3), K (x3)
Diagram Description: Additional screws J and cam locks K are used to reinforce the desk structure.
Step 22: Final Desk Top Attachment
Ensure the front-back direction of part 1 is correct. Align the rear edge of part 1 with the desk back.
Parts used: 1 (x1), C (x8)
Diagram Description: Part 1 (desk top) is placed onto the main desk structure. Dowels C are used for alignment. The text emphasizes checking the orientation of part 1 and aligning its rear edge with the desk's back edge.
Step 23: Secure Glass Top (or Desk Top)
Use cam locks (part B) to secure the desk top.
Parts used: B (x6)
Diagram Description: Cam locks (part B) are used to secure the desk top to the frame.
Step 24: Final Assembly Check
Insert drawer handles (part D) into the drawers.
Parts used: D (x4)
Diagram Description: The completed desk is shown with the top shelf unit and drawers installed. Handles (part D) are shown being inserted into the drawers.
Customer Support & Resources
If you are not entirely satisfied with your purchase, please feel free to contact Yaheetech using the following steps:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the list displayed.
- Select "Contact seller".
Contact Information:
Manufactured in PRC for Yahee GmbH
Importer: Yahee GmbH
Höpfigheimer Straße 11
74321 Bietigheim-Bissingen
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.
