Assembly Instruction
SKU CODE: (WF283747/WF283748)
Detail View - DAY BED
The following diagram shows an exploded view of the daybed components:
Component 1: Left headboard
Component 2: Right headboard
Component 3: Back guard rail frame
Component 4: Bed side plate
Component 5: Bed side plate
Component 6: Front frame
Component 7: Rear frame
Component 8: Side bonding bar (2pcs)
Component 9: Mid bonding bar (2pcs)
Component 10: Bed board (15pcs)
Component 11: Corner bonding wood (4pcs)
Component 12: Bonding wood (4pcs)
Component 13: Wooden slider (2pcs)
Component 14: Drawer left side panel (2pcs)
Component 15: Drawer right side panel (2pcs)
Component 16: Drawer back plate (2pcs)
Component 17: Drawer panel (2pcs)
Component 18: Drawer bottom plate (2pcs)
Component 19: Wooden slider (2pcs)
Identifying the Hardware: Identify the hardware using the illustrations below.
Part List - WF283747
- 1: Left headboard - 1pc
- 2: Right headboard - 1pc
- 8: Side bonding bar - 2pcs
- 9: Mid bonding bar - 2pcs
- 10: Bed board - 15pcs
- 11: Corner bonding wood - 4pcs
- 12: Bonding wood - 4pcs
- 13: Wooden slider - 2pcs
- 19: Wooden slider - 2pcs
Part List - WF283748
- 3: Back guard rail frame - 1pc
- 4: Bed side plate - 1pc
- 5: Bed side plate - 1pc
- 6: Front frame - 1pc
- 7: Rear frame - 1pc
- 14: Drawer left side panel - 2pcs
- 15: Drawer right side panel - 2pcs
- 16: Drawer back plate - 2pcs
- 17: Drawer panel - 2pcs
- 18: Drawer bottom plate - 2pcs
Hardware List - WF283747
| A: Hex-Head bolts (4pcs) - Ø13x1/4"x30mm | B: Hex-Head bolts (8pcs) - Ø13x1/4"x60mm | C: Horizontal-Hole bolts (8pcs) - Ø10x13mm |
| D: Hex-Head screw (4pcs) - Ø13x1/4"x50mm | E: Wheels (4pcs) | F: Flat head screw (8pcs) - Ø7x3.5x15mm |
| G: Round head screw (78pcs) - Ø8xØ4x30mm | H: Blocks semicircular (2pcs) | I: Flat head screw (4pcs) - Ø7x3.5x12mm |
| J: Wood dowel (10pcs) - Ø10x40mm | K: Allen key (1pc) - 4mm |
Assembly Tools Required (Not Included): [Screwdriver icon], [Wrench icon]
STEP 1
Hardware required: B (8PCS), C (8PCS), D (4PCS), J (6PCS)
Attach components 1, 2, 3, 4, and 5 using hardware B, C, D, and J as shown in the diagram. Ensure correct alignment.
Verification: Check that components are securely fastened (✔️) and not loose (❌).
STEP 2
Hardware required: G (8PCS)
Attach component 7 to component 6 using hardware G. Insert component 12 into the designated slots.
STEP 3
Hardware required: E (4PCS), F (8PCS)
Attach component E (Wheels) to component 8 using hardware F. Repeat for the second component 8. (X2)
STEP 4
Hardware required: A (4PCS), J (4PCS)
Attach component 7 and 8 to the main frame using hardware A and J. Ensure proper alignment.
STEP 5
Hardware required: G (16PCS)
Attach component 11 to the frame using hardware G. Repeat as shown in the diagram.
STEP 6
Hardware required: G (4PCS)
Attach component 13 to the frame using hardware G. Repeat as shown.
STEP 7
Hardware required: G (30PCS)
Attach the bed boards (component 10) to the frame using hardware G. Ensure all 15 bed boards are securely fastened.
STEP 8
Hardware required: G (16PCS)
Assemble the drawers. Attach drawer side panels (14, 15) and back plate (16) to the drawer bottom plate (18) and drawer panel (17) using hardware G. Repeat for the second drawer. (X2)
STEP 9
Hardware required: G (4PCS), H (2PCS), I (4PCS)
Attach the drawer runners (component 19) to the drawers using hardware G. Attach the drawer handles (component H) using hardware I. Repeat for the second drawer. (X2)
STEP 10
Insert the assembled drawers into the daybed frame. Ensure the drawer runners (13 and 19) engage correctly.
STEP 11
The daybed assembly is now complete. Ensure all parts are securely fastened. Dispose of packaging responsibly [Recycle icon].
