Assembly Instructions
Twin House Bunk Bed
Model Numbers: WF197817, 197818
Detail View
This section provides an exploded view of all components included in the bunk bed kit. Each part is assigned a numerical identifier, which corresponds to its listing in the Parts List. This overview helps in identifying all pieces before starting the assembly process.
Parts List
WF197817
| Part No. | Description | Quantity |
|---|---|---|
| 1 | Roof panels | 8pcs |
| 20 | Slats (upper 10pcs / lower 8pcs) | 18pcs |
| 21 | Window side panels | 2pcs |
| 22 | Left window - side panels | 1pc |
| 23 | Right window - side panels | 2pcs |
| 24 | Window upper panels | 2pcs |
| 25 | Window lower panels | 2pcs |
WF197818 (Hardware in this SKU)
| Part No. | Description | Quantity |
|---|---|---|
| 2 | Roof top support | 1pc |
| 3 | Roof front support | 1pc |
| 4 | Roof back support | 1pc |
| 5 | Front side rail | 1pc |
| 6 | Back guard rails | 2pcs |
| 7 | Back side rail | 1pc |
| 8 | Bottom side rails | 2pcs |
| 9 | Roof - front support | 2pcs |
| 10 | Roof - back support | 2pcs |
| 11 | Roof - center front support | 1pc |
| 12 | Roof - center back support | 1pc |
| 13 | Head board panels | 4pcs |
| 14 | Head board panels | 4pcs |
| 15 | Left front leg | 1pc |
| 16 | Right front leg | 1pc |
| 17 | Left back leg | 1pc |
| 18 | Right back leg | 1pc |
| 19 | Guard rail support | 1pc |
| 26 | Window frame | 4pcs |
| 27 | Window frame | 4pcs |
| 28 | Window bar | 2pcs |
| 29 | Window bar supports | 4pcs |
| 30 | Ladder - left leg | 1pc |
| 31 | Ladder - right leg | 1pc |
| 32 | Ladder steps | 3pcs |
Hardware List (WF197818)
| Identifier | Description | Quantity |
|---|---|---|
| A | Ø4x30 screw | 39PCS |
| B | Ø4x25 screw | 52PCS |
| C | Ø4x15 screw | 6PCS |
| D | 6.5x100 screw | 18PCS |
| E | 6.5x80 screw | 13PCS |
| F | 6.5x60 screw | 18PCS |
| G | 6.5x40 screw | 9PCS |
| H | 6.5x30 screw | 8PCS |
| I | 1/4x75 screw | 16PCS |
| J | 1/4x20 screw | 10PCS |
| K | Ø10x40 screw | 50PCS |
| L | 4x70 screw | 1PC |
| M | Bracket | 2PCS |
Assembly Tools Required (Not Included): Screwdriver, Allen wrench.
Assembly Steps
Step 1: Ladder Assembly
Assemble the ladder. Connect the ladder legs (part 30, 31) to the ladder steps (part 32). This involves using screws such as F (6.5x60) and K (Ø10x40), along with brackets M and L. The diagram shows specific attachment points and quantities, for instance, using two screws (F) and one bracket (M) to secure a ladder step to a leg.
Step 2: Main Frame Assembly
Assemble the main frame by connecting the side rails (parts 5, 7, 8) to the legs (parts 15, 16, 17, 18). This is done using screws D (6.5x100) and K (Ø10x40), along with brackets L. The headboard panels (parts 13, 14) are then attached to the legs using screws D and brackets K. The diagram indicates specific part usage counts like (13)x4, (14)x4, (15)x1, (16)x1, (17)x1, (18)x1.
Step 3: Side Panel Construction
Construct the two side panels of the bunk bed. Each panel consists of vertical supports and horizontal slats. These are joined using screws F (6.5x60), K (Ø10x40), D (6.5x100), and brackets L (4x58). The diagram illustrates the assembly of two identical side panel structures.
Step 4: Connecting Main Structure and Roof Supports
Connect the assembled side panels to the main frame. Attach roof supports (parts 2, 9, 10) and side rails (parts 5, 7, 8) to the side panels using screws E (6.5x80), L (4x58), K (Ø10x40), and I (1/4x75). This step builds the primary structure of the bunk bed, including the foundation for the roof. The diagram shows specific part usage counts like (4)x1, (2)x1, (6)x2, (7)x1, (8)x2, (3)x1, (5)x1.
Step 5: Attaching Headboards and Roof Panels
Attach the headboard panels (parts 13, 14) and roof panels (part 1) to the main structure. This is secured using screws A (Ø4x30), E (6.5x80), G (6.5x40), and brackets H (6.5x30), L (4x58). The diagram shows the bunk bed structure nearing completion with the roof and headboards in place. Specific part usage counts are indicated, such as (12), (11), (20)x18, (19)x1.
Step 6: Window Frame Assembly
Assemble the window frames (parts 26, 27). This involves joining the frame pieces using screws F (6.5x60) and L (4x58). The diagram shows the construction of two window frames.
Step 7: Window Bar Attachment
Attach the window bars (part 28) to the assembled window frames. This is done using screws G (6.5x40) and L (4x58). The diagram illustrates how the bars are secured to the frame structure. Specific quantities are indicated, such as (26)x4, (27)x4, (28)x2.
Step 8: Final Window Bar Attachment
Continue attaching window bars (part 28) to the window frames. This step uses screws G (6.5x40) and L (4x58). The diagram shows the final window bar attachments to complete the window sections. Specific quantities are indicated, such as (25)x2.
Step 9: Window Panel Installation
Install the window panels (parts 21, 22, 23, 24, 25) onto the side panels of the bunk bed. This is secured using screws B (Ø4x25). The diagram shows how the window sections are fitted into the side panels of the main bunk bed structure.
Step 10: Final Structural Reinforcement
Secure various parts of the bunk bed structure using hardware. This step involves using screws H (6.5x30) and J (1/4x20), along with brackets L (4x70). The diagram shows final reinforcement points, particularly around the roof and upper sections, to ensure stability. Specific quantities are indicated, such as (10)x2, (9)x2.
Step 11: Completed Bunk Bed
The final step shows the completed Twin House Bunk Bed. It confirms all parts are assembled correctly. Screws B (Ø4x25) and C (Ø4x20) are used for any final touches or securing loose ends. The image displays the fully assembled bunk bed, ready for use.
