Assembly Instructions
Model Number: 761G
Warranty Information
We stand behind our products & service with confidence! If parts are damaged or missing, please feel free to contact us for a FREE REPLACEMENT. We warranty this product to be free from defects in materials. This warranty covers one year from the date of original purchase.
Notes
- The item is only intended to be used indoors. The product must be assembled and used in accordance with the provisions of the manual.
- It is recommended that assembly is undertaken by about 2 adults. Please read assembly instructions before assembly and strictly adhere to each step outlined. Estimated assembly time is 30 minutes.
Warning
WARNING FOR YOUNG CHILDREN - This product contains small components, please ensure that they are kept away from small children while assembling.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Side Rail Support | 1PCS |
| B | Headboard Side Post | 1PCS |
| C | Headboard Side Post | 1PCS |
| D | Footboard Side Post | 1PCS |
| E | Headboard Panel | 1PCS |
| O | Center Support Rail | 2PCS |
| P | Slats Support Bar | 1PCS |
| Q | Slats | 4PCS |
| R | Slats Support Bar | 2PCS |
| S | Center Support Leg | 2PCS |
| T | Side Rail | 2PCS |
| U | Side Rail | 2PCS |
| V | Foot | 4PCS |
| W | Foot | 2PCS |
| X | Foot | 2PCS |
| Y | Foot | 1PCS |
| Z | Foot | 4PCS |
| a | Bolt (1/4*85) | 4PCS |
| b | Bolt (1/4*55) | 4PCS |
| c | Bolt (1/4*50) | 8PCS |
| d | Bolt (1/4*40) | 16PCS |
| e | Bolt (1/4*28) | 8PCS |
| f | Bolt (1/4*19) | 4PCS |
| k | Nut | 4PCS |
| t | Washer | 2PCS |
| u | Washer | 2PCS |
| v | Washer | 4PCS |
| w | Washer | 4PCS |
| x | Allen Wrench | 1PCS |
| y | Wrench | 2PCS |
IMPORTANT: Please check parts list before you start to assembly. If parts are damaged or missing, contact your seller for a FREE REPLACEMENT. Please provide your order number, a brief message about the issue, and your shipping address. Thank you!
Assembly Steps
NOTE: PLEASE DO NOT TIGHTEN THE BOLTS UNTIL ALL FIXED
- Attach side posts (B, C) to the headboard panel (E) using bolts (c*4) and the Allen wrench (x).
- Attach side posts (A, D) to the headboard panel (E) using bolts (c*4) and the Allen wrench (x).
- Attach side rails (T, U) to the headboard side posts (B, C) using bolts (a*2, t*2) and the Allen wrench (x).
- Attach side rails (T, U) to the footboard side posts (A, D) using bolts (a*2, t*2) and the Allen wrench (x).
- Attach side rails (T, U) to the headboard side posts (B, C) and footboard side posts (A, D) using bolts (d*4, v*4, w*4) and the Allen wrench (x).
- Attach center support legs (S) to the center support rails (R) using bolts (d*8) and the Allen wrench (x). Note: The part "S" must be put in the middle hole position.
- Attach center support rails (Q) to the side rails (T, U) using bolts (z*2, d*4) and the Allen wrench (x).
- Attach center support rails (Q) to the side rails (T, U) using bolts (Q*4) and the Allen wrench (x).
- Attach the slats support bars (R) to the side rails (T, U) using bolts (f*4) and the Allen wrench (x).
- Attach the slats support bars (X) to the side rails (T, U) using bolts (e*8, w*8) and the Allen wrench (x).
- Attach the slats support bars (P) to the side rails (T, U) using bolts (P*4, k*4). Note: Paste the "k" fitting on the surface of the "R" fitting, as shown in the picture in the middle of the "R" fitting.
- Insert the slats (Q) into the designated slots.
IMPORTANT: Please completely tighten all the bolts and nuts.
After-sales support email: after-saleservice@outlook.com
