Indesit BIWDIL75125UKN Washer Dryer Quick Guide
Thank you for purchasing an Indesit product. Register your product at www.indesit.com/register for more complete assistance.
Before using the appliance, carefully read the Safety Instructions. Ensure transport bolts are removed as per the Installation Guide.
Control Panel
- ON/OFF button
- START/PAUSE button with indicator light
- WASH CYCLE PROGRESS indicator lights
- DOOR LOCKED indicator light
- FUNCTION buttons with indicator lights
- DRYING ONLY button with indicator light
- DRYING LEVELS button
- TIME DRYING button
- TEMPERATURE button
- WASH CYCLE knob
- PUSH & GO button
Wash Cycle Table
Maximum load for washing: 7 kg. Power input in off mode: 0.5 W / in left-on mode: 8 W.
Wash cycle | Setting | Range | Maximum load for washing (Kg) | Maximum load for drying (Kg) | Maximum spin (r.p.m.) | Maximum duration (h:m) | Detergents and Additives (Powder, Liquid, Fabric softener) | Recommended detergent | Residual dampness % (*) | Energy consumption kWh | Total water It | Laundry temperature °C |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mixed | 40°C -40°C | 1000 | 7,0 | 5,0 | ☐ | 1:00 | ☐ ☐ ☐ | ✓ | 50 | 1,0 | 75 | 45 |
Cotton (2) | 40°C -60°C | 1200 | 7,0 | 5,0 | ☐ | 3:40 | ☐ ☐ ☐ | ✓ | 35 | 0,9 | 60 | 43 |
Synthetics (3) | 40°C -60°C | 1200 | 4,0 | 4,0 | ☐ | 2:55 | ☐ ☐ ☐ | ✓ | 52,1 | 1,4 | 75 | 55 |
White | 60°C -90°C | 1200 | 7,0 | 5,0 | ☐ | 2:30 | ☐ ☐ ☐ | ✓ | 53 | 1,04 | 48 | 38 |
Colours | 40°C -40°C | 1200 | 7,0 | 5,0 | ☐ | 1:30 | ☐ ☐ ☐ | ✓ | 53 | 0,68 | 45 | 36 |
Eco 40-60 (1) | 40°C | 1151 | 7,0 | 3,5 | ☐ | 3:25 | ☐ ☐ ☐ | ✓ | 53 | 0,52 | 39 | 36 |
Sport | 40°C | 600 | 3,5 | 3,5 | ☐ | 1:30 | ☐ ☐ ☐ | ✓ | 53 | 0,52 | 39 | 36 |
20°C | 20°C | 1200 | 7,0 | 5,0 | ☐ | 1:50 | ☐ ☐ ☐ | ✓ | 52 | 0,2 | 64 | 22 |
Anti Odour | 40°C | 1000 | 3,0 | 3,0 | ☐ | 1:40 | ☐ ☐ ☐ | ✓ | - | - | - | - |
Delicates | 30°C | 0 | 1,0 | - | 1:20 | ☐ ☐ ☐ | ✓ | - | - | - | - | |
Wool | 40°C -40°C | 800 | 1,5 | 1,5 | ☐ | 1:15 | ☐ ☐ ☐ | ✓ | - | - | - | - |
Rapid 30' | 30°C | 800 | 3,5 | - | 0:30 | ☐ ☐ ☐ | ✓ | 73 | 0,2 | 31 | 27 | |
Wash&Dry 45 min | 30°C | 1200 | 1,0 | 1,0 | ☐ | 0:45 | ☐ ☐ ☐ | ✓ | - | - | - | - |
Air Fresh | - | - | - | - | - | 0:30 | - | - | - | - | - | - |
Rinse + Spin | - | 1200 | 7,0 | - | 0:55 | - | - | - | - | - | - | |
Spin + Drain | - | 1200 | 7,0 | - | 0:10 | - | - | - | - | - | - | |
Eco cotton (4) | 60 °C | 1200 | 7,0 | 5,0 | ☐ | 4:10 | ☐ ☐ ☐ | ✓ | 53 | 1,1 | 55 | 55 |
(*) Required dosage ☐ Optional dosage
Note: The values for programmes other than Eco 40-60 are indicative. Programme duration may vary based on water temperature, pressure, etc.
(1) Eco 40-60: Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. Most efficient for normally soiled cotton laundry in terms of energy and water consumption.
(2) Long cotton programme: set programme '2' at 40°C.
(3) Synthetics programme: set programme '3' at 40°C.
(4) Eco Cotton: Test wash cycle in compliance with regulations 1061/2010. Set programme '2' at 60°C.
Product Description
- Top
- Detergent dispenser drawer
- Control panel
- Handle
- Porthole door
- Drain pump
- Adjustable feet (4)
Detergent Dispenser Drawer
Compartment 1: Do not insert detergent.
Compartment 2: Washing detergent (powder or liquid).
Compartment 3: Additives (fabric softener, etc.). Do not exceed the "max" level.
Use powder detergent for white cotton garments, pre-washing, and temperatures over 60°C. Follow detergent packaging instructions.
Daily Use
Prepare laundry according to garment care labels. Turn the washer-dryer on using the ON/OFF button. The indicator lights will briefly illuminate.
Push & Go: Open the door, load laundry (do not exceed maximum load), add detergent, close the door, and press the PUSH & GO button for 2 seconds to start the cycle.
Traditional Programming: Open the door, load laundry, add detergent, close the door. Select the desired WASH CYCLE knob setting. Adjust temperature and options if needed. Press START/PAUSE ▷00 to begin.
Pausing a Cycle
Press the START/PAUSE ▷00 button to pause. The indicator light will flash. Press again to resume. The door can only be opened if the DOOR LOCKED indicator light is off.
Opening the Door, If Necessary
While a cycle is running, the door is locked. To add or remove laundry, press START/PAUSE ▷00 to pause the cycle. If the DOOR LOCKED indicator light is off, the door can be opened. Press START/PAUSE ▷00 again to continue.
Changing a Running Wash Cycle
Pause the cycle by pressing START/PAUSE ▷00. Select the new cycle and press START/PAUSE ▷00 again.
End of the Cycle
The END indicator light illuminates when the cycle is complete. The door can be opened when the indicator light switches off. Unload laundry and switch off the machine. The machine will switch off automatically after approximately 10 minutes if not manually switched off. Close the water tap and leave the door ajar to allow the drum to dry.
Functions
- If a selected option is incompatible with the wash cycle, its indicator light will flash, and the option will not be activated.
- If an option is incompatible with a previously selected option, the indicator light will flash with a buzzer, and only the latter option will be activated.
Stain removal: Select the type of dirt (Food, Work, Outdoor) to optimize the cycle for stain removal.
Slow Spin: Reduces the spin speed.
Extra rinse: Increases rinse efficiency for better detergent removal, ideal for sensitive skin.
Temperature: Press the button to modify the pre-defined temperature.
Drying: Set drying based on desired dryness level (Iron, Hanger, Cupboard) or a set time period (40-180 minutes).
Drying Only
Press the button to perform a drying-only cycle. Select a compatible cycle and press the button to exclude the washing phase.
Push & Go
Press and hold the PUSH & GO button for 2 seconds to start the cycle. This is ideal for cotton or synthetic fabrics, washing at 30°C with a maximum spin of 1000 rpm. Drying temperature is up to 60°C. Maximum load is 3.5 kg. Cycle duration is 210 minutes.
How it works: Load laundry, add detergent, close door, press and hold PUSH & GO for 2 seconds. The indicator light turns green, and the door locks.
Washing only: Press PUSH & GO, then the drying button to disable drying. Maximum load for washing only is 4 kg (45 minutes).
Tips and Suggestions
- Divide laundry: by fabric type, color (separate new colored items), and delicates (use a fabric bag for items like stockings and bras).
- Empty pockets: remove coins, lighters, etc., to prevent damage.
- Follow dosage recommendations: use the correct amount of detergent to optimize cleaning and avoid residue.
- Use low temperature and longer duration: generally more energy-efficient.
- Observe load sizes: do not overload the machine to save water and energy.
- Noise and remaining moisture content: influenced by spin speed. Higher spin speed means more noise but less moisture.
Care and Maintenance
- Switch off and disconnect the appliance before cleaning. Do not use flammable liquids. Clean periodically (at least 4 times per year).
- Disconnect water and power supplies: Close the water tap after each wash. Unplug the appliance when cleaning.
- Clean the washer-dryer: Use a soft cloth with lukewarm soapy water. Do not use solvents or abrasives.
- Auto-clean cycle: Run without load. Use detergent or special additives. Recommended every 40 wash cycles. To start, press and simultaneously for 5 seconds. The cycle runs for about 70 minutes.
- Clean the detergent dispenser drawer: Wash under running water.
- Care for the door and drum: Leave the porthole door ajar to prevent odors.
- Clean the pump: The pump is auto-cleaning. Small items may fall into the pre-chamber. To access: turn the drainage pump cover anti-clockwise, clean thoroughly, and screw the cover back on.
- Check the water inlet hose: Inspect annually for cracks or breaks. Replace if damaged. Never use previously used hoses.
Troubleshooting
Anomaly | Possible Cause / Solution |
---|---|
The washer-dryer does not start. | Appliance not plugged in or not making contact. No power. Door not closed properly. ON/OFF button not pressed. |
The wash cycle does not start. | START/PAUSE button not pressed. Water tap not opened. Delay start set. Water inlet hose not connected or bent. |
The machine does not fill with water or the indicator light for the first wash cycle stage flashes rapidly. | Water tap not opened. No water supply or low pressure. START/PAUSE button not pressed. |
The washer-dryer continuously loads and unloads water. | Drain hose not fitted correctly (height) or end immersed in water. Wall drainage system lacks a breather pipe. Potential back-siphonage issue. |
The washer-dryer does not drain or spin. | Cycle does not include drainage. Drain hose bent. Drainage duct clogged. Drum not unlocked during installation. Washer-dryer not level. Machine too close to furniture/wall. Water inlet hose not screwed on properly. Detergent dispenser obstructed. Drain hose not properly attached. |
The washer-dryer vibrates a lot during the spin cycle. | Drum not unlocked correctly during installation. Washer-dryer not level. Machine too close to furniture/wall. Water inlet hose not screwed on properly. |
The washer-dryer leaks. | Water inlet hose not properly attached. Detergent dispenser obstructed. Drain hose not properly attached. |
The "Options" lights and the START/PAUSE indicator light flash while one of the wash cycle progress and DOOR LOCKED lights are lit in a fixed manner. | Switch off, unplug for 1 minute, then switch back on. If problem persists, contact Technical Assistance Service. |
There is too much foam. | Detergent not suitable for machine washing or too much detergent used. |
The Push & Go function does not activate. | Another function was activated. Switch off, press Push & Go. Appliance not plugged in or not making contact. Power failure. Door not shut properly. All drying indicator lights are off. |
The washer-dryer does not dry. | Appliance not plugged in or not making contact. Power failure. Door not shut properly. All drying indicator lights are off. |
Resources
Download Safety Instructions, Product Fiche, and Energy data from www.indesit.eu or via QR Code.
Contact Technical Assistance Service using the phone number in the warranty booklet. Provide product identification codes.
User's Repair & Maintenance Information available at www.indesit.com.
Model information can be retrieved using the QR Code on the energy label or via https://eprel.ec.europa.eu.