Indesit Washing Machine - Quick Guide

Control Panel

The control panel features the following buttons:

• 1. ON/OFF Button
• 2. START/PAUSE Button and Indicator Light
• 3. TEMPERATURE Button
• 4. DISPLAY
• 5. OPTIONS Button
• 6. DRY ONLY Button
• 7. DRY Button
• 8. DELAY START Button
• 9. SPIN Button
• 10. PROGRAMMES Knob
• 11. PUSH & GO Button

Programmes Table

Maximum load: 8 Kg. Standby power consumption: 0.5 W / Standby mode: 8 W.

Notes:

• Cycle duration is an estimate. Actual time may vary.
• (1) Eco 40-60: Test cycle compliant with EU Ecodesign regulation 2019/2014 for normally soiled cotton items.
• (2) Cotton programme: for cotton and linen items, very dirty.
• (3) Synthetics programme: for synthetic textiles.
• (4) Eco 40-60 (Wash & Dry): Test cycle compliant with EU Ecodesign regulation 2019/2014.
• Spin speed displayed may differ slightly from the table.

Product Description

The appliance includes:

1. Worktop
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Door (Hublot)
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)

Detergent Dispenser Drawer:

• Compartment 1: No detergent.
• Compartment 2: Wash detergent (powder or liquid). Use separator A for liquid detergent.
• Compartment 3: Additives (softener, etc.). Do not exceed the 'max' level.

Important: Use powder detergent for white cotton and for washes above 60°C. Follow detergent instructions. Press lever C to remove the drawer.

Using the Appliance

Daily Use:

1. Press ON/OFF button. The START/PAUSE indicator will flash.
2. Open the door and load laundry, ensuring not to overload.
3. Add detergent and additives to the correct compartments.
4. Close the door.

Starting a Cycle:

• Push & Go: Press and hold the PUSH & GO button for 2 seconds. The cycle starts automatically.
• Traditional Programming:
  • Select the desired programme using the knob.
  • Adjust temperature and spin speed if needed.
  • Select any desired options.
  • Press the START/PAUSE button to begin.

Display Explanation:

• Section A: Shows programme duration and remaining time.
• Section B: Shows washing phases (Wash, Rinse, Spin/Drain, Dry).
• Section C: Shows wash option levels.
• Section D: Shows drying levels and timed drying indicator.

Door Lock Indicator: The symbol ? indicates the door is locked. Wait for it to turn off before opening.

Pausing a Cycle: Press START/PAUSE. The indicator light will turn amber and flash. Press again to resume.

Opening the Door During a Cycle: Pause the cycle first (START/PAUSE). If the door lock symbol is off, you can open it. Press START/PAUSE again to continue.

Modifying a Cycle: Pause the cycle, select a new programme, and press START/PAUSE again.

Cancelling a Cycle: Press and hold the ON/OFF button.

Programme Details

• Cotton: For cotton and linen, very dirty.
• Synthetics: For synthetic textiles.
• Mixed: For mixed fibres and colours.
• Eco 40-60: For normally soiled cotton items, declared washable at 40°C or 60°C. Most energy and water efficient.
• Whites: For whites and resistant colours, very dirty.
• Delicates: For very delicate textiles. Use liquid detergent.
• Colours: For light-coloured textiles, preserves colour vibrancy.
• Dark: For dark-coloured textiles, preserves colour. Use liquid detergent.
• Anti-odour: Removes bad odours (e.g., tobacco, sweat).
• 20°C: For lightly soiled cotton items.
• Wool: Approved by Woolmark for washable wool items.
• Rapid 30': For lightly soiled laundry (except wool/silk), 4.5 kg max, 30 minutes. Saves time and energy.
• Wash & Dry 45': For lightly soiled cotton/synthetics, up to 1 kg, in 45 minutes.
• Refreshment: Ideal for refreshing and removing odours from cotton/synthetics (max 1.5 kg) in 30 minutes, without washing.
• Rinse + Spin: For rinsing and spinning.
• Spin + Drain: For spinning and draining water.
• Push & Go: Ideal for cotton and synthetics, 30°C wash, 1000 rpm spin. Max load 3 kg.

Maintenance and Care

• Turn off and unplug the appliance before cleaning.
• Clean the exterior with a damp cloth and mild soap.
• Use the 'Auto Clean' programme for internal cleaning (empty drum).
• Clean the detergent drawer regularly with running water.
• Leave the door slightly ajar to prevent odours.
• Pump Cleaning:
  • Remove the front panel.
  • Unscrew the drain pump cover (counter-clockwise).
  • Clean the interior.
  • Screw the cover back on and refit the panel.
• Water Inlet Hose: Check annually for cracks. Replace if damaged. Use only new hoses.

Troubleshooting

Problem: Appliance does not switch on.

• Check plug connection.
• Check for power outage.
• Ensure the door is properly closed.
• Ensure the ON/OFF button has been pressed.

Problem: Wash cycle does not start.

• Ensure the water tap is open.
• Check if a delay start is set.
• Ensure the water inlet hose is connected correctly and not kinked.

Problem: Appliance takes water and drains continuously (H2O error).

• Check water tap is open.
• Check for water supply issues.
• Ensure sufficient water pressure.
• Ensure the drain hose is at the correct height (65-100 cm) and not submerged.
• Check for wall drain ventilation.
• Consider anti-siphon valve if in a multi-story building.

Problem: Appliance does not drain or spin.

• Check if the drain hose is kinked.
• Check if the drain hose is blocked.
• Ensure the drum was unlocked during installation.
• Ensure the appliance is level.
• Ensure the appliance is not obstructed by furniture.

Problem: Excessive vibration during spin.

• Ensure the appliance is level.
• Ensure the appliance is not touching furniture.
• Check water inlet and drain hoses are secure.
• Ensure the detergent drawer is not clogged.

Problem: Appliance is leaking.

• Check water inlet hose connection.
• Check drain hose connection.

Problem: Option and START/PAUSE lights flashing rapidly, error code on display.

• Turn off, unplug for 1 minute, then restart. If the problem persists, contact service.

Problem: Excess foam.

• Use only 'for washing machine' detergent.
• Reduce the amount of detergent used.

Problem: Push & Go not active.

• Ensure a programme other than Push & Go was not activated.
• Check plug connection and power supply.
• Ensure the door is properly closed.
• Check if a delay start is set.
• Ensure the DRY setting is not OFF.

Problem: Appliance does not dry.

• Ensure the door is properly closed.
• Check if a delay start is set.
• Ensure the DRY setting is not OFF.

For detailed instructions, safety information, and technical data, visit http://docs.indesit.eu or use the QR code.