XUK1ARCNL5

Photoelectric sensors XU, XUK, reflex, Sn 7 m, 24...240VAC/DC, cable 5 m

Main Characteristics

Characteristic	Value
Range of product	Telemecanique Photoelectric sensors XU
Series name	General purpose single mode
Electronic sensor type	Photo-electric sensor
Sensor name	XUK
Sensor design	Compact 50 x 50
Detection system	Reflex
Material	Plastic
Type of output signal	Discrete
Supply circuit type	AC/DC
Wiring technique	5-wire
Discrete output function	1 C/O
Electrical connection	Cable
Cable length	5 m
Product specific application	-
Emission	Infrared reflex
[Sn] nominal sensing distance	7 m reflex need reflector XUZC50

Complementary Characteristics

Characteristic	Value
Enclosure material	PBT
Lens material	PMMA
Maximum sensing distance	10 m reflex
Output type	Relay
Cable composition	5 x 0.34 mm²
Wire insulation material	PVC
Cable outer diameter	6 mm
Status LED	1 LED (yellow) for output state, 1 LED (green) for supply
[Us] rated supply voltage	24...240 V AC/DC
Supply voltage limits	20...264 V AC
Switching capacity in mA	3 A (cos φ = 1 for 0.5 million cycles at 1 operating cycle per second at 250 V)
Switching frequency	≤ 20 Hz
Current consumption	≤ 35 mA no-load
Maximum power consumption in W	2 W AC
Maximum delay first up	60 ms
Maximum delay response	25 ms
Maximum delay recovery	25 ms
Setting-up	Without sensitivity adjustment
Electrical durability	500000 cycles, cos φ = 1, operating rate <60 cyc/mn at 250 V
Depth	50 mm
Height	50 mm
Width	18 mm
Net weight	0.035 kg

Environment and Sustainability

Environment

Characteristic	Value
Product certifications	Ecolab, CE
Ambient air temperature for operation	-25...55 °C
Ambient air temperature for storage	-40...70 °C
Vibration resistance	7 gn, amplitude = +/- 1.5 mm (f = 10...55 Hz) conforming to IEC 60068-2-6
Shock resistance	30 gn (duration = 11 ms) conforming to IEC 60068-2-27
IP degree of protection	IP65 double insulation conforming to IEC 60529

Packing Units

Characteristic	Value
Unit Type of Package 1	PCE
Package 1 Length	13.0 cm
Number of Units in Package 1	1
Package 2 Width	30.0 cm
Package 2 Height	15.0 cm
Package 2 Weight	6.791 kg
Package 1 Width	13.0 cm
Package 1 Height	4.0 cm
Package 1 Weight	316.0 g
Number of Units in Package 2	20
Unit Type of Package 2	S02
Package 2 Length	40.0 cm

Offer Sustainability

Characteristic	Value
Sustainable offer status	Green Premium product
REACH Regulation	REACH Declaration
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Mercury free	Yes
RoHS exemption information	Yes
Environmental Disclosure	Product Environmental Profile
Circularity Profile	End Of Life Information

Contractual Warranty

Characteristic	Value
Warranty	18 months

Dimensions

Detailed dimensions are provided in a diagram. The overall sensor dimensions are: Height: 50 mm (1.97 in), Width: 50 mm (1.97 in), Depth: 18 mm (0.71 in). Mounting holes are 4 x Ø4.4 mm, spaced 40 mm apart. The diagram also indicates the cable entry point and sensor face details.

Wiring Schemes

Relay Output

The wiring scheme for the relay output is as follows:

BU (Blue): Supply voltage (24...240 VAC/DC)
BK (Black): Common terminal for the relay output
BN (Brown): Normally Open (NO) contact
GY (Grey): Normally Closed (NC) contact
WH (White): Not specified in the diagram.

Note: The original document's text descriptions for wire functions contained some ambiguities; this interpretation is based on the provided diagram and standard industry practice for 5-wire relay output sensors.

Performance Curves

Detection Curves

The detection curve illustrates the sensing performance of the XUK1ARCNL5 photoelectric sensor when used with the XUZC50 reflector. The nominal sensing distance (Sn) is up to 7 meters (≤ 7 m). The graph shows the detection range in centimeters (cm) versus distance in meters (m), depicting the sensor's sensitivity zone.

	Schneider Electric XUK0ARCTL2 Photo-electric Sensor Datasheet Technical data sheet for the Schneider Electric OsiSense XU XUK0ARCTL2 photo-electric sensor, detailing its specifications, features, and environmental characteristics including sensing distances, voltage, and certifications.
	Schneider Electric Osiconcept Photoelectric Sensors: Installation and Troubleshooting Guide Comprehensive guide for Schneider Electric Osiconcept photo-electric sensors (XUB, XUM, XUK, XUX series), covering installation, operation, troubleshooting, and technical specifications. Includes troubleshooting tables and wiring diagrams.
	Schneider Electric XUM9APXBM8 China RoHS Compliance Information This document provides China RoHS compliance information for Schneider Electric's XUM9APXBM8 photoelectric sensor, detailing the presence of hazardous substances in its components as per regulations.
	Schneider Electric PowerTag M630 Wireless Energy Sensor Installation and Technical Data Instruction sheet and technical data for the Schneider Electric PowerTag M630 wireless energy sensor, covering installation, safety, status LEDs, and technical specifications.
	Schneider Electric Proximity Sensors Selection Guide Comprehensive selection guide for Schneider Electric inductive proximity sensors, detailing specifications, catalog number interpretation, and application data for the XS sensor series.
	Wiser Temperature/Humidity Sensor User Guide User guide for the Schneider Electric Wiser Temperature/Humidity Sensor, covering installation, pairing, configuration, usage, automation creation, troubleshooting, and technical specifications.
	Schneider Electric SpaceLogic Sensors Installation Guide: Humidity and Temperature Installation instructions and specifications for Schneider Electric's SpaceLogic SLA Series humidity and temperature sensors, covering product features, wiring, setup, and operation for building automation systems.
	Schneider Electric Ceiling Mounted Ultrasonic Occupancy Sensor Instruction Bulletin Instruction bulletin detailing the features, specifications, installation, and operation of Schneider Electric's SLSCUS series ceiling-mounted ultrasonic occupancy sensors, including models SLSCUS501, SLSCUS1001, SLSCUS2001, and SLSCUS801.