XUK0ARCTL2 Photo-electric Sensor
Product Type: Photo-electric sensor
Series: OsiSense XU
Model: XUK0ARCTL2
Description: Multi-mode, compact 50x50 sensor with 2m cable, suitable for general purpose applications.
Main Characteristics
| Commercial Status | Commercialised |
|---|---|
| Range of product | OsiSense XU |
| Series name | General purpose multimode |
| Electronic sensor type | Photo-electric sensor |
| Sensor name | XUK |
| Sensor design | Compact 50 x 50 |
| Detection system | Multimode |
| Material | Plastic |
| Type of output signal | Discrete |
| Supply circuit type | AC/DC |
| Wiring technique | 5-wire |
| Discrete output function | 1 NO or 1 NC programmable |
| Electrical connection | Cable |
| Cable length | 2 m |
| Product specific application | - |
| Emission |
|
| [Sn] nominal sensing distance |
|
Complementary Characteristics
| Enclosure material | PBT |
|---|---|
| Lens material | PMMA |
| Maximum sensing distance |
|
| Output type | Relay |
| Add on output | Without, <= 50 mA with overload and short-circuit protection |
| Wire insulation material | PvR |
| Status LED |
|
| [Us] rated supply voltage |
|
| Supply voltage limits |
|
| Switching capacity in mA | 3 A (power factor = 1 for 0.5 million cycles at 1 operating cycle per second at 250 V) |
| Switching frequency | <= 20 Hz |
| Voltage drop | <= 1.5 V (closed state) |
| Power consumption in W | 3 W AC/DC |
| Time delay range | 0...10 s monostable, on-delay or off-delay (programmable) delay |
| Delay first up | < 300 ms |
| Delay response | < 25 ms |
| Delay recovery | < 25 ms |
| Setting-up | Self-teaching |
Electrical Characteristics
| Electrical durability | 500000 cycles, power factor = 1, 60 cycles/minute at 250 V |
|---|---|
| Depth | 18 mm |
| Height | 50 mm |
| Width | 50 mm |
| Product weight | 0.175 kg |
Environment and Certifications
| Product certifications |
|
|---|---|
| Ambient air temperature for operation | -25...55 degrees Celsius |
| Ambient air temperature for storage | -40...70 degrees Celsius |
| Vibration resistance | 7 g-force, amplitude = plus or minus 1.5 mm (frequency = 10...55 Hz) conforming to IEC 60068-2-6 |
| Shock resistance | 30 g-force (duration = 11 ms) conforming to IEC 60068-2-27 |
| IP degree of protection | IP65 double insulation conforming to IEC 60529 |
Compliance and Warranty
| RoHS compliance | Compliant |
|---|---|
| RoHS EUR status | Compliant |
| RoHS EUR conformity date(YYWW) | 0903 |
| Contractual warranty period | 18 months |
Disclaimer
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
