Renkforce RF-VDA-310 USB 3.0 to HDMI/DVI/VGA External Graphics Card

1. Intended Use

This product is an external graphics card for your PC, designed to connect an additional monitor via HDMI, DVI, or VGA. It connects to a USB 3.0 port on your computer. The product complies with statutory national and European requirements. Do not rebuild or modify the product for safety and approval reasons. Improper use can lead to short circuits, fire, or other hazards.

2. Delivery Contents

• Product
• Operating Instructions

3. Latest Product Information

Download the latest product information at www.conrad.com/downloads or scan the QR code. Follow the instructions on the website.

4. Symbol Explanation

⚠️ The symbol with the exclamation mark in a triangle indicates important information in this document. Always read this information carefully.

5. Safety Instructions

Read the operating instructions carefully and observe the safety information. Failure to follow these instructions may result in personal injury or property damage, and will invalidate the warranty/guarantee.

5.1 General

• The product is not a toy. Keep it away from children and pets.
• Do not leave packaging material lying around carelessly, as it can become dangerous playing material for children.
• If you have questions not answered in this document, contact technical support or qualified personnel.
• Maintenance, modifications, and repairs must only be performed by a qualified technician or authorized repair center.

5.2 Handling

• If safe operation is no longer possible (e.g., visible damage, malfunction, improper storage, or transport stress), take the product out of operation and protect it from accidental use.
• Handle the product carefully. Jolts, impacts, or falls can damage the product.
• Consult an expert if you have doubts about the operation, safety, or connection of the device.

5.3 Operating Environment

• Protect the product from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
• Do not switch the product on immediately after moving it from a cold to a warm environment to prevent condensation damage. Allow it to reach room temperature first.

5.4 Connected Devices

• Also observe the safety and operating instructions of any other devices connected to the product.

6. Disposal

This symbol ♻️ indicates that electrical and electronic equipment must not be disposed of as unsorted municipal waste at the end of its service life. End users must dispose of old equipment separately from unsorted municipal waste. Remove batteries and lamps from old equipment before disposal. Distributors are legally obliged to provide free take-back of old equipment. Check local regulations for disposal and recycling.

7. Product Overview

The product features the following ports and indicators:

• 1. Power indicator (LED)
• 2. VGA port
• 3. 3.5 mm TRS stereo jack (for audio output)
• 4. HDMI port
• 5. USB 3.2 Type-A plug (for connection to PC)
• 6. DVI port

8. Operation

After installing the driver software, connect an external display. You can extend or mirror your primary display by adjusting your PC's display settings.

Preconditions:

• ✔ The PC has booted.

Steps:

1. Connect the USB 3.2 plug to an available USB 3.0 port (or higher) on your PC. The power indicator LED will light up, and the software installer directory will appear.
2. Double-click the installer file compatible with your operating system in the software installer directory to start the installation process.
3. Restart your computer after the installation is complete.
4. Once your computer has restarted, connect an external monitor to the HDMI, DVI, or VGA port of the product using suitable cables.
5. Turn on the external monitor. The external display will show an extended or mirrored image of your primary monitor.
6. (Optional) For audio output, connect a headset with a 3.5 mm stereo jack plug to the 3.5 mm stereo jack. Important: only connect 3.5 mm TRS jack plugs.
7. On your PC, access the display settings menu to configure whether to extend or mirror the primary monitor's display.

9. Cleaning and Care

NOTICE! Do not use aggressive cleaning agents, rubbing alcohol, or other chemical solutions, as they can damage the housing and cause malfunctions.

1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.

10. Technical Data

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). Copyright by Conrad Electronic SE.

Model Number: RF-VDA-310, Item Number: 2377801