Renkforce USB-C® 5-in-1 Multiport Hub Audio/Video Adapter
Item No. 3402204
1. Operating Instructions for Download
Download the complete operating instructions (or the latest versions) by visiting www.conrad.com/downloads or by scanning the QR code. Follow the instructions on the webpage.
2. Intended Use
This product is a USB adapter designed exclusively for indoor use. Avoid outdoor use and contact with moisture. Using the product for purposes other than those described may damage it and could lead to short circuits, fire, or other hazards. The product complies with national and European regulations. Do not rebuild or modify the product for safety and approval reasons. Read the manual carefully and keep it safe. Pass the product on to third parties only with the manual. Company and product names are trademarks of their respective owners. HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress, and HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. USB4®, USB Type-C®, and USB-C® are registered trademarks of USB Implementers Forum.
3. Delivery Content
- Product
- Operating Instructions
4. Symbol Explanation
The following symbol may appear on the product or in the text: [warning] This symbol warns of hazards that can lead to personal injury.
5. Safety Instructions
Read the operating instructions carefully, paying special attention to the safety information. Failure to follow these instructions may result in personal injury or property damage, and will void the warranty/guarantee.
5.1 General Information
This device is not a toy. Keep it away from children and pets. Do not leave packaging material unattended, as it can become a hazard for children. For unanswered questions, contact technical support. Maintenance, modifications, and repairs must only be performed by a qualified technician or an authorized repair center.
5.2 Handling
Handle the product with care. Jolts, impacts, or falls from even a low height can damage the product.
5.3 Operating Environment
Do not subject the product to mechanical stress. Protect it from extreme temperatures, strong jolts, flammable gases, vapors, and solvents. Protect the product from high humidity, moisture, and direct sunlight.
5.4 Operation
Consult an expert if you have doubts about operation, safety, or connection. If safe operation is no longer possible (e.g., visible damage, malfunction, improper storage, or transport stress), take the product out of operation and protect it from accidental use. Do not attempt self-repair.
5.5 Connected Devices
Observe the safety and operating instructions of any other devices connected to this product.
6. Product Overview
The adapter features the following ports:
- 1. Screen ON/OFF button
- 2. USB-C® port
- 3. USB-A Output
- 4. USB-PD-IN Input
- 5. HDMI-3 Output
- 6. HDMI-2 Output
- 7. HDMI-1 Output
7. Connection
This section describes how to connect the hub to your devices and displays.
Diagram Description: A USB-C source device (e.g., laptop) is shown connected to the multiport hub. The hub then connects to three external displays via HDMI cables. The USB-A port is shown available for connecting a USB-A device.
7.1 Troubleshooting Display Issues
If the device screen cannot be displayed on your monitor:
- Ensure your device and the display support the same resolution. If resolutions differ, manually lower the device's output resolution for simultaneous display.
- Confirm your device supports DP Alt Mode (video/audio output).
- Verify all cables and connections are secure.
7.2 Screen ON/OFF Button
Press the Screen ON/OFF button to toggle the HDMI output on or off.
7.3 MST Resolution
This section illustrates display configurations using DisplayPort Multi-Stream Transport (MST) with DP 1.4 (DSC) support.
Extend Mode:
- With a Windows® / Mac (MST Display) system, up to three displays can be connected. Configurations shown include:
- Display A: 4K 60 fps
- Display B: 4K 60 fps
- Display C: 4K 60 fps
- Another configuration shows:
- Display A: 4K 60 fps
- Display B: 4K 30 fps
- Display C: 4K 30 fps
- A third configuration shows:
- Display A: 4K 30 fps
- Display B: 4K 30 fps
- Display C: 4K 30 fps
- Display D: 4K 60 fps
Note: Supports up to four external displays simultaneously on Windows® 10 or later, and MacBook Pro with M4 Max.
Mirror Mode:
- With a Windows® / Mac (MST Display) system, up to three displays can be connected. Configurations shown include:
- Display A: 4K 60 fps
- Display B: 4K 60 fps
- Another configuration shows:
- Display A: 4K 30 fps
- Display B: 4K 30 fps
- A third configuration shows:
- Display A: 4K 30 fps
- Display B: 4K 30 fps
8. Cleaning and Care
Important: Do not use aggressive cleaning agents, rubbing alcohol, or other chemical solutions, as they can damage the housing and cause malfunctions. Do not immerse the product in water. Disconnect the product from connected devices before cleaning. Clean the product with a dry, lint-free cloth.
9. Disposal
This symbol indicates that the device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of Waste from Electrical and Electronic Equipment (WEEE) must dispose of it separately. End users must remove batteries, accumulators, and lamps before handing over the device to a collection point. Distributors are legally obliged to provide free take-back. Check local regulations for disposal and recycling. End users are responsible for deleting personal data from the WEEE.
10. Technical Data
Feature | Specification |
---|---|
10.1 USB-C® Cable | |
Type | USB-C® |
Specifications | DP specification: DP 1.4, USB 3.2 Gen 2, Requires DP Alt mode |
Power Input | 5-20 V/DC, max. 5 A, max. 100 W |
Power Output (Uplink) | 5-20 V/DC, max. 5 A, max. 100 W |
Data Rate | max. 10 Gbps |
Supported Systems | Windows®, Chrome OS, Android, macOS, iPadOS, Linux |
Requires DP Alt Mode | Yes, DP 1.4 |
Cable Length | 15 cm |
10.2 USB-C® Power Port | |
Imprint Label | USB-PD-IN |
Port Type | USB-C® |
Number of Ports | 1x |
Port Specifications | PD specification: PD 3.0 |
Power Input | 5-20 V/DC, max. 5 A, max. 100 W |
Data Rate | No data transfer |
10.3 USB-A Data Port | |
Imprint Label | USB-A |
Port Type | USB-A |
Number of Ports | 1x |
Port Specifications | USB-A 3.2 Gen 2 |
Power Output | 5 V/DC, max. 1.5 A, max. 7.5 W |
Data Rate | max. 10 Gbps |
10.4 HDMI | |
Imprint Label | HDMI-1, HDMI-2, HDMI-3 |
Number of Ports | 3x |
Video Resolution | 4K (3840 x 2160) @ 60 fps |
HDCP Support | HDCP 2.2 |
10.5 Environment | |
Working Temperature | 0 to +43 °C |
Working Humidity | 10-90% RH (non-condensing) |
Storage Temperature | 0 to +60 °C |
Storage Humidity | 10-90% RH (non-condensing) |
10.6 Other | |
Housing Material | Aluminum alloy |
Dimensions (W x H x D) | 125 x 13.5 x 65 mm |
Weight | approx. 134 g |