Manuals+

ProSense DPM3-P Series 1/8 DIN Digital Panel Meters

Model Numbers: DPM3-P, DPM3-P-H, DPM3-P-A2R-H, DPM3-P-L, DPM3-P-A2R-L

Product Overview

The ProSense DPM3-P series offers a simple, feature-packed digital display for counter, chronometer, frequency, tachometer, rate, and pulse width modulated (PWM) applications. The DPM3-P features a 5-digit, 14mm character height, tri-color (red, green, or amber) LED display. It accepts input from AC voltage, magnetic sensors, NPN/PNP sensors, NAMUR sensors, TTL/24V encoders, or switched contacts, and provides selectable sensor excitation voltages. Models are available with two SPDT relay outputs that can be set to activate on an increasing or decreasing input signal with hysteresis or time delay operation in tachometer, rate, and frequency modes, as well as pulsed or latched operation in counter and chronometer modes. Additionally, the display color can be set to change on relay operation. Models are also available with a 4-20mA analog output. The meter is powered from an external AC or DC power supply. The 1/8 DIN housing is easy to install in a panel, and the meter face has an IP65 rating. Configuration parameters can be totally or selectively locked out to prevent unauthorized or accidental changes to the meter's operation. Other features include memory and reset of minimum (valley) and maximum (peak) display values, start/stop in chronometer mode or stop in counter mode, and display brightness adjustment. ProSense digital panel meters are backed by a 3-year warranty.

Features

DPM3-P Series Panel Meters

Model Description Weight (lbs) Price
DPM3-P-H ProSense digital panel meter, 1/8 DIN, 14mm 5-digit tri-color (red, green, amber) LED, pulse and frequency input, 85 to 265 VAC/100 to 300 VDC operating voltage. 0.6 $135.00
DPM3-P-A2R-H ProSense digital panel meter, 1/8 DIN, 14mm 5-digit tri-color (red, green, amber) LED, pulse and frequency input, 4-20 mA, (2) 8A SPDT relays output, 85 to 265 VAC/100 to 300 VDC operating voltage. 0.71 $169.00
DPM3-P-L ProSense digital panel meter, 1/8 DIN, 14mm 5-digit tri-color (red, green, amber) LED, pulse and frequency input, 22 to 53 VAC/10.5 to 70 VDC operating voltage. 0.59 $135.00
DPM3-P-A2R-L ProSense digital panel meter, 1/8 DIN, 14mm 5-digit tri-color (red, green, amber) LED, pulse and frequency input, 4-20 mA, (2) 8A SPDT relays output, 22 to 53 VAC/10.5 to 70 VDC operating voltage. 0.69 $169.00

Technical Specifications

Parameter Specification
Tachometer/Frequency Mode Maximum Frequency: 20kHz (without totalizer), 8kHz (with totalizer). Minimum Frequency: 0.01 Hz. 1kHz (duty).
Counter Mode Without totalizer: 11kHz. With totalizer: 9kHz.
AC voltage Input Range: 10 to 300 VAC
Magnetic Sensor Input Sensitivity: Vin (AC) > 60mVpp for f < 1kHz, > 120 mVpp for f > 1kHz.
NAMUR* Sensor Input RC 3.3 kΩ. I_ON < 1mA DC, I_OFF > 3mA DC.
NPN/PNP Sensors Input RC 3.3 kΩ. Logic level “0” < 2.4 VDC, Logic level “1” > 2.6 VDC.
TTL/24V Encoder Input Logic level “0” < 2.4 VDC, Logic level “1” > 2.6 VDC.
Switched Contact Input VC 5V (internal). RC 3.9 kΩ. FC (auto selection of input type prog.) 20Hz with duty cycle 50%, 10Hz with duty cycle 30%.
Accuracy at 23ºC ±5ºC Frequency / Tachometer: 0.005%. Chronometer: 0.01%.
Temperature coefficient 50ppm / ºC
Warm-up time 5 minutes
Power Supply and Fuses -H High Voltage: 85-265 VAC 50/60 Hz or 100-300 VDC (recommended fusing 0.5A/250V).
-L Low Voltage: 22-53 VAC 50/60 Hz or 10.5 - 70 VDC (recommended fusing 2A/250V).
Power Consumption 5W, 8W for -A2R
Sensor Excitations 8.2 VDC @ 30mA ; 20VDC (not stabilized) @ 100mA
Display Type: 5 LED digits 14mm (0.55”) (Programmable color Red, Green, Amber). LEDs: 8, functions and outputs status. Decimal Point: Programmable. Positive overflow indication: OvEr. Negative overflow indication: -OvEr. Counter display limits: Process -99999 to 99999. Totalizer: -9999999 to 99999999. Chronometer ranges: 4, from 999.99s to 99999h. Frequency ranges: 0.01 Hz to 20kHz/10kHz(totalizer). Tachometer range: 0 to 99999(rpm), programmable (rate). Scale factor: Counter/Tach, programmable from 0.0001 to 99999. Display update rate: Counter/Chronometer, 100ms. Frequency/Tachometer, programmable 0.1 to 9.9 s.
Relays -A2R Only Maximum switching current (resistive load): 8A. Maximum switching power: 2000VA / 192W. Maximum switching voltage: 400VAC / 125VDC. Contact rating: 8A @ 250VAC / 24VDC. Contact resistance: ≤ 100mΩ at 6 VDC @ 1A. Contact type: SPDT. Operate time: ≤ 10ms.

Analog Output -A2R Only

Parameter Specification
Type 4-20 mA Sourcing
Maximum load < 500Ω
Resolution 13 bits
Accuracy 0.1%FS ±1 bit
Response time 50ms
Thermal drift 0.5μΑ / °C
Operating temperature -10°C to +60°C (14°F to 140°F)
Storage temperature -25°C to +80°C (-13°F to 176°F)

Environmental Conditions

Parameter Specification
Relative humidity (non-condensing) < 95% @ 40°C (104°F)
Maximum altitude 2000m
Frontal protection degree IP65
Environmental Air No corrosive gases permitted

Agency Certifications

CE

Wiring

CN1: AC Supply / DC Supply
1: Line / 1 VDC
2: Neutral / 2 VDC
3: Polarity insensitive for DC power

CN2: Electrical Inputs
1: Not used
2: (+) 20V Excitation
3: (+) 8.2 V Excitation for NAMUR sensors
4: (-) Common excitation / signal
5: Signal B input
6: Signal A input

CN3: Logic Functions
1: Input 1
2: Input 2
3: Input 3

CN5: Analog Output
1: (-) 4-20mA
2: (+) 4-20mA

CN6: Relay 1
1: NO1
2: CM1
3: NC1

CN4: 2 SPDT Relays (-A2R)
Relay 2: NO2, CM2, NC2
Relay 1: NO1, CM1, NC1

Note: For additional wiring information, download the complete manual from www.AutomationDirect.com.

Terminals

Connector CN1 CN2 CN3 CN4 & CN5 CN6
Wire cross section 0.08 to 2.5mm² (28 to 12 AWG) 0.08 to 0.5mm² (28 to 20 AWG) 0.08 to 0.5mm² (28 to 20 AWG) 0.08 to 2.5mm² (28 to 12 AWG) 0.08 to 2.5mm² (28 to 12 AWG)
Strip length 8 to 9mm 5 to 6mm 5 to 6mm 8 to 9mm 8 to 9mm
Manufacturer Wago 231-302/026-000 Wago 733-108 Wago 733-104 Wago 231-303/026-000 Wago 231-302/026-000
Connection Cage clamp connection Insertion tool or screwdriver with 0.5 mm x 3.0 mm blade Insertion tool or screwdriver with 0.3 mm x 1.8 mm blade Insertion tool or screwdriver with 0.3 mm x 1.8 mm blade Insertion tool or screwdriver with 0.5 mm x 3.0 mm blade Insertion tool or screwdriver with 0.5 mm x 3.0 mm blade

Input Wiring Diagrams

MAGNETIC SENSOR (CN2: 1, 4)

SWITCHED CONTACT (CN2: 1, 4)

NAMUR SENSOR (CN2: 3, 4)

ENCODER (CN2: 2, 5, 6)

PNP/NPN SENSOR (CN2: 2, 4, 5)

WARNING!: Never connect a dangerous voltage to PIN 4 of CN2 (input common).

CN2 and CN3 Terminals

Insertion Tool (included with meter)

Insert wires into the proper terminal while using the insertion tool to open the clip inside the connector. Release the insertion tool to fix wire to the terminal.

CN1, CN4, CN5 and CN6 Terminals

Insertion Tool (included with meter)

Insert wires into the proper terminal while using the insertion tool to open the clip inside the connector. Release the insertion tool to fix wire to the terminal.

Dimensions

mm [inches]

Overall Dimensions: 96.0 [3.78] x 48.0 [1.89] x 60mm

Panel Cutout: 92 x 45mm (Max. panel thickness 10mm)

Case Material: Polycarbonate UL 94 V-0

For complete Engineering drawings, visit www.AutomationDirect.com.

Programming Panel

# Description Run Mode Programming Mode
1 TARE Indicates that there is an offset value programmed ---
2 MAX Solid indicates rotation sense or count polarity; Blinking indicates visualization of a Max value Indicates rotation sense (polarity)
3 MIN Solid indicates rotation sense or count polarity; Blinking indicates visualization of a Min value Indicates rotation sense (polarity)
4 PROG Displays the input variable Indicates programming mode
5 DISPLAY --- Displays programming parameters
6 RESET/OFFSET KEY In Tachometer mode reset of MAX/MIN/TOTAL (if present on display) To increase blinking digit value
7 MAX-MIN/TOTAL KEY In Counter mode Reset / OFFSET (starts MAX-MIN/TOTAL measuring) To move blinking digit
8 ENTER KEY 1st push allows TOTALIZER visualization (if activated) 2nd push allows Max visualization (only Tachometer) 3rd push allows Min visualization (only Tachometer) Following push: back to current value. Direct access to Setpoints value
To enter programming menu or to visualize parameters if programming is locked
To step forward in programming menu
To validate programmed values
To exit programming menu
9 Free space for units label --- ---
10 LED Output 4 --- ---
11 LED Output 3 Activation Output 2 Programming output 2
12 LED Output 2 Activation Output 1 Programming output 1
13 LED Output 1 --- ---

Panel Meter Accessories

Model: DPM-BKT1

Description: ProSense panel mount bracket, for use with DPM2 and DPM3 series 1/8 DIN digital panel meters. Hardware included.

Weight: 0.3 lbs

Price: $20.00

The DPM-BKT1 kit includes:

PDF preview unavailable. Download the PDF instead.

prosensedpm3p

Related Documents

Preview ProSense DPM1 Series 1/32 DIN Digital Panel Meters | Temperature Measurement
Discover the ProSense DPM1 Series 1/32 DIN digital panel meters for accurate temperature monitoring. Featuring a 4-digit LED display, RTD/Thermocouple inputs, IP65 rating, and a 3-year warranty. Ideal for industrial automation.
Preview ProSense DPM1 Series 1/32 DIN Digital Panel Meters
ProSense DPM1 Series 1/32 DIN digital panel meters offer a simple, low-cost solution for displaying analog process signals. These meters feature a 4-digit red LED display, selectable decimal point, and manual or teach mode scaling for linear and non-linear processes. They include two SPST relay outputs with hysteresis or time delay operation and are available with a 0/4-20mA analog output. The meters are powered by external AC or DC, provide 20VDC for sensor excitation, and have an IP65 rated front panel. Configuration can be locked out, and they include memory for min/max display values, a tare function, and display filtering. ProSense digital panel meters come with a 3-year warranty.
Preview ProSense DPM1 Series 1/32 DIN Digital Panel Meters | Automation Direct
Discover the ProSense DPM1 Series 1/32 DIN digital panel meters, offering precise measurement of analog process and DC voltage signals. Features include a 4-digit red LED display, selectable decimal points, versatile input ranges, and robust IP65 front panel protection. Ideal for industrial applications.
Preview ProSense FMM Series (-1001) Magnetic-Inductive Flow Meters
AutomationDirect's ProSense FMM Series (-1001) Magmeters are designed for reliable flow rate detection of conductive media up to 160 GPM. These stainless steel, mechanically-robust meters offer in-line mounting, a 4-digit numeric display with pushbutton setup, and selectable engineering units. They feature two outputs for remote monitoring of binary or analog status, and are a reliable alternative to traditional flow meters.
Preview ProSense FMM Series (-1002) Magnetic-Inductive Flow Meters
Explore the ProSense FMM Series (-1002) Magnetic-Inductive Flow Meters, designed for reliable liquid flow rate detection. This document provides an overview, features, specifications, and selection guides for these robust and compact flow meters.
Preview ProSense FMM Series (-1002) Magnetic-Inductive Flow Meters
Automation Direct's ProSense FMM Series (-1002) Magmeters offer reliable detection of conductive liquid flow rates up to 158.5 GPM. These compact, stainless steel meters feature a 4-digit display, selectable engineering units, and two analog outputs for remote monitoring of flow and temperature. They are suitable for various industrial process applications.
Preview ProSense DPM4 Advanced High Speed Process Panel Meters User Manual
User manual for the ProSense DPM4 Advanced High Speed Process Panel Meters, covering installation, operation, programming, and technical specifications. Includes details on input configuration, output options, and troubleshooting.
Preview ProSense Field Device Configurator Software Help File
This document provides a comprehensive help file for the ProSense Field Device Configurator Software, detailing its features, operation, and configuration parameters for XTH2-0-UNV and XTD2-0-UNV temperature transmitters.